To avoid these ads, REGISTER NOW!

Amazon Warehouse Deals

OP
D

Duker

Well-known member
Joined
Sep 25, 2010
Messages
10,861
Location
Livingston, TX
Since somebody liked the 2 x 72 belts.... Make your own Housemade Revolution grinder!

VEVOR Belt Grinder 2" x 72" Wheel Set, Complete Belt Knife Grinder Wheel Set, Aluminum Belt Grinder Wheel Crowned, for Knife Grinder 5" Drive Wheel 5/8" Bore 4" Tracking 2" Idler Wheels (5"-4"-2")​



1708552206937.png
 
To avoid these ads, REGISTER NOW!

zeug

Well-known member
Joined
Nov 29, 2009
Messages
191
Location
Colorado Springs

vwpieces

Well-known member
Joined
Apr 28, 2020
Messages
5,925
Location
Hills, PA

stillnostrebor

Well-known member
Joined
Apr 1, 2019
Messages
619
Location
SW Missouri
Since somebody liked the 2 x 72 belts.... Make your own Housemade Revolution grinder!

VEVOR Belt Grinder 2" x 72" Wheel Set, Complete Belt Knife Grinder Wheel Set, Aluminum Belt Grinder Wheel Crowned, for Knife Grinder 5" Drive Wheel 5/8" Bore 4" Tracking 2" Idler Wheels (5"-4"-2")​



1708552206937.png
You hooked me with this one...

I guess now I have to build a grinder.
 

darrowco

Well-known member
Joined
Jul 10, 2010
Messages
151
Location
Los Angeles (California)

NSi Industries TORK 1109A Indoor 40-Amp Multi-Volt Mechanical Lighting and Appliance Timer - 24-Hour Programming - Multiple On/Off Settings - 120/208-277-Volt - Grey 2.9 x 4.7 x 7.9 inches​



1708547393380.png

Well, that did not work - came clean but was non-operational. The center disk spins freely on the shaft even the screw is tight. Plus, the center disk, when rotated by hand, trips the ON switch ok but something is bent/missing and there is no way to rotate past the OFF trip. The only way to switch off is by using the manual lever behind the OFF label. Can't win them all, back is goes!
 

jhelrey

Well-known member
Joined
Sep 15, 2010
Messages
7,249
Location
MN
Received my Gearwrench socket set today. Brand new. Someone fondled it, but no grease, no signs of use, etc. Case could be a touch more rugged but the price was right.
 

MadWheelie

Well-known member
Joined
Nov 15, 2017
Messages
80
So I got the Grey Pneumatic Metric Socket Set today and it was just an empty case. I can't believe they would try and resell it missing all the sockets.
 

89MustangGX

Well-known member
Joined
Feb 24, 2008
Messages
1,023
Location
Stanwood, WA
So I got the Grey Pneumatic Metric Socket Set today and it was just an empty case. I can't believe they would try and resell it missing all the sockets.

Wow. We've seen the products replaced with cheaper or worn out stuff, but who has the gall to return an empty case for a refund and then who at Amazon can't figure it out?!?
 

89MustangGX

Well-known member
Joined
Feb 24, 2008
Messages
1,023
Location
Stanwood, WA
The 1" Milton pressure regulator came in. I actually thought that it was brand new as the box looked original and untouched, but upon opening it I did find a bag with a hole in it. I suspect it originally came with two plugs for the pressure ports on it, but only one loose in the box. No instructions either. But no evidence of it actually being used -- still paint on the threads, etc. Going to see if I can find a materials list to make sure I'm not missing anything, but I think it's a win.
 
OP
D

Duker

Well-known member
Joined
Sep 25, 2010
Messages
10,861
Location
Livingston, TX
To avoid these ads, REGISTER NOW!

BroncoAZ

Well-known member
Joined
Jun 23, 2018
Messages
2,667
Location
MA
To avoid these ads, REGISTER NOW!
Top Bottom