Amazon Warehouse Deals

[Cruzan80]

Supposed to arrive Sat. Hopefully it wasnt well loved previously...

 

[2manytools]

Thanks @vwpieces. Picked up the Torin bottle air jack. Cosmetic damage was all done to the box. Definitely had a rough ride, but nothing leaking and everything is still factory bubble wrapped inside.

Hopefully just having it on hand will prevent any major breakdowns. You know how it goes

 

[Kbach]

Thanks @vwpieces. Picked up the Torin bottle air jack. Cosmetic damage was all done to the box. Definitely had a rough ride, but nothing leaking and everything is still factory bubble wrapped inside.

Hopefully just having it on hand will prevent any major breakdowns. You know how it goes

So you're the one!!! I've been waiting to find a deal on a AOH bottle jack and was excited when I saw it listed on here a bit ago. Click on the link and bummer....already sold. At least somebody on here got it! Hope it gives you years of good service @2manytools

 

[Swervyjoe]

So you're the one!!! I've been waiting to find a deal on a AOH bottle jack and was excited when I saw it listed on here a bit ago. Click on the link and bummer....already sold. At least somebody on here got it! Hope it gives you years of good service @2manytools

I've been waiting for one since I got a SWAG brake. I saw it but was trying not to spend even more money so it worked out for me.

 

[vwpieces]

So you're the one!!! I've been waiting to find a deal on a AOH bottle jack and was excited when I saw it listed on here a bit ago. Click on the link and bummer....already sold. At least somebody on here got it! Hope it gives you years of good service @2manytools

They pop up on occasion. Will msg ya if I see one under $70ish. Not too often they go under $80.
I put one on my 20T press and it was about the same price, same condition...
Put some oil down the hose for the piston. Mine needed some coaxing to pump but been great since for the few times I have needed it.

 

[HotRodHudson]

I bought the 20ton air bottle jack from HFT a couple years ago. It works great in my 4 post lift’s jack tray. Should have bought 2, I think they discontinued them.

 

[vwpieces]

I bought the 20ton air bottle jack from HFT a couple years ago. It works great in my 4 post lift’s jack tray. Should have bought 2, I think they discontinued them.

They still have them, were on sale for $99 a few months back.

 

[vwpieces]

• WORKSHOP Wet/Dry Vacs Vacuum Accessories WS12553A 1-1/4-Inch Accessory Kit for Wet/Dry Shop Vacuum Cleaners, BlackWORKSHOP Wet/Dry Vacs Vacuum Accessories WS125…
• $8.53

• Southwire 02548-USA1 50-Foot Contractor Grade 12/3 with Lighted End American Made Extension CordSouthwire 02548-USA1 50-Foot Contractor Grade 12/3…
• $25.48

• Ingersoll Rand 7811G Edge Series 3/8" Reversible Air Drill Keyless Chuck, 1700 RPM, Variable Speed Trigger, Forward & Reverse Controls, Handle Exhaust, Comfortable Grip, SilverIngersoll Rand 7811G Edge Series 3/8" Reversible Air Dri…
• $38.63

• Performance Tool W85020 Tractor Creeper Rolling Work Seat with Storage Tray for Mechanic Garages and Workshops, Black, 24-inch HeightPerformance Tool W85020 Tractor Creeper Rolling Wor…
• $29.88

• Shop Fox W1799 2-1/4 gallon Paint TankShop Fox W1799 2-1/4 gallon Paint Tank
• $38.57

• Lincoln 83753 Value Series Air and Water 50 Foot x 3/8 Inch Retractable Hose Reel, 1/4 Inch NPT Fitting, Slotted Mounting Base, 5-position Adjustable Outlet ArmLincoln 83753 Value Series Air and Water 50 Foot x 3/8 Inc…
• $115.66

• E-Z Red XL3300 450 Lumen Xtreme Rechargeable Work LightE-Z Red XL3300 450 Lumen Xtreme Rechargeable Work…
• $35.48

• The Mibro Group 416381 8" Carbide Stacking Dado Blade Set - 14 PiecesThe Mibro Group 416381 8" Carbide Stacking Dado Blad…
• $32.97

• AntLux 4FT LED Strip Lights 50W LED Shop Lights, 1-10V Dimmable, 5500LM, 4000K, 4 Foot Integrated Linear LED Ceiling Light Fixtures for Garage Workshop Basement, Fluorescent Tube Replacement, 4 PackAntLux 4FT LED Strip Lights 50W LED Shop Lights, 1-10V…
• $95.75

 

[volvo problem]

Got the Gearwrench 12 piece flex head wrench set a while back.https://www.amazon.com/gp/product/B0002U2ODE/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
Over half the swivel heads just flopped around back and forth. I like the set but cant have this. I searched for a fix but so far have not been able to find anything. Anybody know of a fix? If I cant make it work I'm going to send it back. Just wanted to give a heads up if it shows back up in this thread.

 

[Cruzan80]

Aircat $69 usually $245- used acceptable

https://www.amazon.com/dp/B07J5GQ2V5/?tag=atomicindus08-20

Supposed to arrive Sat. Hopefully it wasnt well loved previously...

So just came in today. Unmarked brown box, wavy bubble wrap. Looks like the instructions and the tool itself are in the original plastic wrap/bags. Not a mark on it.

Definately "Acceptable" to me! Now just need something to try it out on.

 

[PugetDude]

I bought a Astro Rivnut tool with dies on AWD a couple of weeks ago. It arrived in the original box with all the dies, instructions, etc. The only mark on the box was the AWD "Thanks to you this product has a second life" sticker.

16 Gallon Ridgid shop vac coming this week- less than half price, advertised as "good" in the original box.
...and an 11# spool of .030 Mig Wire.
...and a 6" stainless steel dial caliper

 

[vwpieces]

• Ratcheting Screwdriver & Nut Driver, Multi-Bit, Cushion Grip Handle Klein Tools 32558, Yellow/BlackRatcheting Screwdriver & Nut Driver, Multi-Bit, Cushion Gri…
• $13.58$13.58

• Bondhus 10737 Set of 11 Balldriver Screwdrivers, ProGuard Finish, Long Length, sizes 5/64-3/8-InchBondhus 10737 Set of 11 Balldriver Screwdrivers, Pro…
• $24.90$24.90

• IRWIN Tools Tinner's Snip, Duckbill Blade, 10-inch (23010)IRWIN Tools Tinner's Snip, Duckbill Blade, 10-inch (230…
• $8.57$8.57

• IRWIN 1913190 Irwin 18" Adj Wrench Steel HandleIRWIN 1913190 Irwin 18" Adj Wrench Steel Handle
• $32.49$32.49

• OTC (7307) Adjustable Hook Spanner WrenchOTC (7307) Adjustable Hook Spanner Wrench
• $62.54$62.54

• AFF 1/2" Drive 250 ft/lbs Ratcheting Torque Wrench, 25.50" OAL, 41053AFF 1/2" Drive 250 ft/lbs Ratcheting Torque Wrench,…
• $53.56$53.56

• Chicago Pneumatic CP7115 Compact Air Powered Needle Scaler, 12 x 1/8", 4,000 BPMChicago Pneumatic CP7115 Compact Air Powered Needl…
• $80.95$80.95

• Powerbuilt 940962 1/2" Drive Digital Torque Adapter, 29 to 147 ft-lbs , BlackPowerbuilt 940962 1/2" Drive Digital Torque Adapter, 29 t…
• $22.56$22.56

• Lithonia Lighting L232 MV 4-Feet T8 General Purpose Fluorescent Industrial Strip with Reflector, WhiteLithonia Lighting L232 MV 4-Feet T8 General Purpose Flu…
• $19.39$19.39

• Akro-Mils 30224 AkroBins Plastic Storage Bin Hanging Stacking Containers, (11-Inch x 4-Inch x 4-Inch), Black, (12-Pack)Akro-Mils 30224 AkroBins Plastic Storage Bin Hanging…
• $24.49$24.49

• Keson SNR10200 Nylon-Reinforced Steel Blade Tape Measure with Stainless Steel Housing, Zero Point at Tape End + 1-Foot and Ring End (Graduations: ft., 1/10, 1/00), 200-FootKeson SNR10200 Nylon-Reinforced Steel Blade Tape…
• $20.41$20.41

• Woodstock D3780 Gouge Chisel Set, 7-PieceWoodstock D3780 Gouge Chisel Set, 7-Piece
• $23.20$23.20

• IRWIN Tools Mechanics Vise, T5, 5-InchIRWIN Tools Mechanics Vise, T5, 5-Inch
• $135.21$135.21

• CTA Tools 5072 T80 Torx Bit Socket - Compatible with LamborghiniCTA Tools 5072 T80 Torx Bit Socket - Compatible with La…
• $11.43$11.43

• JET 717650 Cyclonic Dust and Chip Separator with BinJET 717650 Cyclonic Dust and Chip Separator with Bin
• $192.18$192.18

• Stanley Proto J2623SW Heavy Duty 12 Point Offset Striking Wrench 1-7/16 InchStanley Proto J2623SW Heavy Duty 12 Point Offset Strikin…
• $33.61$33.61

 

[Cruzan80]

Just a heads up, the bearing puller has horrible reviews. The only good review is very generic, amd the rest are 1-2 stars.

 

[vwpieces]

Just a heads up, the bearing puller has horrible reviews. The only good review is very generic, and the rest are 1-2 stars.

Deleted it, CTA hasn't been up to par even at 30% of retail.
Thanks.
I am usually just looking at numbers and it takes me bout a min to make a post after the collection is in the cart. Not really paying close attention to details.

 

[skamath]

Powematic wood mortiser >50%

2 remaining.
Used - Very Good $445.53
Used - Like New $460.06

Amazon.com

 

[Odd-job]

EZ Red XL5500-GR 500 Lm Rechargeable Worklight, 4 Pack​

$83, normal $300?)

Hopefully this is a 4 pack. For $20 a light this would be a good deal with something hopefully superior to the Harbor Freight lights.

https://www.amazon.com/dp/B07CZSPQM5/?tag=atomicindus08-20

 

[skamath]

Powematic wood mortiser >50%

2 remaining.
Used - Very Good $445.53
Used - Like New $460.06

Amazon.com

surprised it is still there. i would have thought it would go really fast.

 

[vwpieces]

• RCBS Precision Mic.243 Win
• $36.85$36.85

• Lyman Pro Magnum Tumbler (115-Volt)
• $60.36$60.36

• RCBS Vibratory Case: Polisher 120Vac US/Can
• $68.74$68.74

• Lee Precision 90694 223 Remington Ultimate Rifle Die Set, Silver
• $42.28$42.28

• Lyman, Scales, Brass Smith 500 Metal (7752225)
• $45.31$45.31

• Frankford Arsenal Case Trim and Prep Center European 240V with Hardened Steel Chamfer Deburr Tool and Primer Pocket Scrapers for Reloading (European Plugs only)
• $90.68$90.68

• RCBS 15401 Series A Full Length Die Set, 303 British
• $25.90$25.90

 

[PugetDude]

Snagged the Woodcraft gouges. Might have to try carving a totem pole this summer, have a couple of big logs at the cabin. ...

 

[vwpieces]

Snagged the Woodcraft gouges. Might have to try carving a totem pole this summer, have a couple of big logs at the cabin. ...

Think those are for wood lathe.

 

[Odd-job]

Thor for $50 off at $109

https://www.amazon.com/dp/B01JBNDW4W/?tag=atomicindus08-20

 

[PugetDude]

Think those are for wood lathe.

Nope, these are carving chisels. Lathe chisels would be much longer and heavier. ( I have a wood lathe) Reviews are mixed; consensus is good quality steel with decent handles but poor factory grinding. I plan on sharpening them before use anyway.
If they are **** I can always send them back.

 

[PugetDude]

Well, the 16 gallon Ridgid Shop Vac is on it's way back- the switch was broken.
Too bad, it was basically brand new.

 

[vwpieces]

Well, the 16 gallon Ridgid Shop Vac is on it's way back- the switch was broken.
Too bad, it was basically brand new.

Oh well.
I got a 30-60K BTU propane bullet heater heater the other day for $50. It is about $150 retail. It didn't work. Must have took a hit and fan blades bent, locking up motor. Deal was too good to send back so I took it apart and fixed it up. Works and its a keeper. Well worth the 30min I had in it.

 

[Crabman]

Arrived pristine, thanks vdub!

 

[vwpieces]

• Mercer Industries BCRIFS Riffle Rasp Set, 7-1/2", 8-Piece
• $6.93$6.93

• IRWIN MARATHON ProTouch Fine-Cut Handsaw, 15-inch (2011200)
• $11.40$11.40

• Steelex Plus D2304 Deluxe HSS Lathe Chisel Set, 6-Piece
• $45.65$45.65

• 3M Paper Sheet 346U, Aluminum Oxide, 9" Width x 11" Length, 36 Grit, Gold (Pack of 50)
• $33.18$33.18

• Pony Jorgensen 8" Carriage C-Clamp
• $15.74$15.74

• Wilton 675U Utility Bench Vise 5-1/2" Jaw Width, 5" Jaw Opening (28819)
• $79.67$79.67

• CRAFTSMAN Deep Impact Socket, SAE, 1/2-Inch Drive, 1-Inch (CMMT15984)
• $3.34$3.34

• CRAFTSMAN Socket Set, SAE, 3/8-Inch Drive, 6-Point, 11-Piece (CMMT12042)
• $13.52$13.52

• Bessey D27AH-BE 1-5/16 In. Cut Capacity 10-1/4 In. Premium High Speed Steel Right Cutting Snip
• $59.15$59.15

• AIRCAT 6700-6-336CV: Central Vacuum Orbital Palm Sander 11,000 RPM
• $67.71$67.71

• Chicago Pneumatic CP7763 Heavy Duty High Power Impact Wrench with Ring Retainer, 3/4-Inch Drive
• $171.63$171.63

• Extech EX410A Professional True RMS Multimeter with 8 Functions
• $19.86$19.86

• Sungold Abrasives 40109 6" PSA Stickyback 150 Grit Grey Silicon Carbide Stearated Non-Loading Discs (125-Pack)
• $10.40$10.40

• OTC (6720-2) 3/8" - 7/16" Flare Nut Locking Pliers
• $27.91$27.91

• Coleman Cable 2577SW000A 25-Foot 12/3 Neon Outdoor Extension Cord, Made in The USA, Water Resistant Vinyl Jacket, Reinforced Blades, Clear Molded Plug with Power Indicated Light, Fluorescent PinkColeman Cable 2577SW000A 25-Foot 12/3 Neon Outdoor…
• $19.49$19.49

• OTC Tools 7177 Heavy Duty Extendable Indexing Pry barOTC Tools 7177 Heavy Duty Extendable Indexing Pry bar
• $88.04$88.04

• Johnson Level & Tool 40-6692 JLT 2 Self-Leveling 2 Dot Laser, 1.97" x 5.75", Red, 1 Laser
• $47.11$47.11

• Tractel CC07009 Corso Beam Lifting Clamp, 3 to 9-5/16-Inch Opening, 2200-Pound Capacity
• $35.19$35.19

• Powerbuilt 648485 Deluxe Tube Bending Pliers, Black
• $7.53$7.53

• Uniweld UDFT Electric/Manual R-410A Ratchet + Clutch Flaring Tool
• $97.22$97.22

• Proto J286LNXL Long Nose Locking Mini Pliers, 6-29/32"
• $18.03$18.03

 

[PugetDude]

Oh well.
I got a 30-60K BTU propane bullet heater heater the other day for $50. It is about $150 retail. It didn't work. Must have took a hit and fan blades bent, locking up motor. Deal was too good to send back so I took it apart and fixed it up. Works and its a keeper. Well worth the 30min I had in it.

This one had an integral switch that was foot-operated. I could have replaced it with a simple toggle switch except this was the new "motor on the bottom" vac technology- top lifts off, motor says put. It would be too cumbersome to operate a toggle switch at floor level.

 

[vwpieces]

More oddball SHTuff

• Strapping Tools Sealer Manual Banding Tool for Polyproplyn Polyester StrapStrapping Tools Sealer Manual Banding Tool for Polyproply…
• $11.70$11.70

• PAC Strapping HD34 Heavy Duty Manual Tensioner for Polyester Strapping up to 3/4" WidePAC Strapping HD34 Heavy Duty Manual Tensioner for P…
• $36.81$36.81

• Guardian Pro Top Indoor Anti-Fatique Floor Mat, Rubber, 2'x3', BlackGuardian Pro Top Indoor Anti-Fatique Floor Mat, Rubber, 2'…
• $13.31$13.31

• SUPERIOR TOOL 05212 1/2" Internal Pipe Wrench,BlackSUPERIOR TOOL 05212 1/2" Internal Pipe Wrench,Black
• $3.17$3.17

• Bolle Safety Ultim8 Ultimate Glasses with Clear Lens, Black/Red, Clear, One SizeBolle Safety Ultim8 Ultimate Glasses with Clear Lens, Blac…
• $6.52$6.52

• Hard-to-Find Fastener 014973147457 Galvanized Anchor Bolts, Gray 5/8-11 x 8", Piece-10Hard-to-Find Fastener 014973147457 Galvanized…
• $8.13$8.13

• Rubbermaid Commercial Products FGK32 Compact Food Service Mechanical Portion Control Scale, 32 oz. with 1 pint CupRubbermaid Commercial Products FGK32 Compact Fo…
• $8.70$8.70

• HENCKELS International Forged Accent 4-pc Steak Knife Set - RedHENCKELS International Forged Accent 4-pc Steak Kn…
• $21.57$21.57

• Carlisle 3621913600 Flo-Pac Hardwood Block Garage Brush, Palmyra Bristles, 36" Block Size, 4" Bristle Trim (Case of 6)Carlisle 3621913600 Flo-Pac Hardwood Block Garage Bru…
• $28.88$28.88

• Rubbermaid Commercial Products FGF55900BL00 Premium 8-Ply Cut-End Blend Mop, 32 oz, 5" Blue Headband (Pack of 12)Rubbermaid Commercial Products FGF55900BL00 Pre…
• $26.06$26.06

• Flexzilla Pro Air Hose Reusable Fitting with Ball Swivel, 1/4 in. - RP900250BSFlexzilla Pro Air Hose Reusable Fitting with Ball Swivel, 1/4…
• $3.43$3.43

• Winters PEM220LF PEM-LF Series Pressure Gauge, 4" Dial size, 1/4" NPT, 0/30 vac/kpa, ±3-2-3% accuracyWinters PEM220LF PEM-LF Series Pressure Gauge, 4" Di…
• $7.13$7.13

 

[vwpieces]

• TekMat Gun Cleaning Mat for use with Glock , BlackTekMat Gun Cleaning Mat for use with Glock , Black
• $2.16$2.16

• TekMat Cleaning Mat for use with Sig Sauer P320, BlackTekMat Cleaning Mat for use with Sig Sauer P320, Black
• $2.66$2.66

• CA5902W-XLS Caddis Men's Neoprene Stockingfoot Waders - XL Stout Green, Forest GreenCA5902W-XLS Caddis Men's Neoprene Stockingfoot Wad…
• $14.49$14.49
• Used, Like New
• Only 1 left in stock - order soon.
• Eligible for FREE Shipping & FREE Returns
• Size: X-Large Stout

• HAOMUK Military Army Tactical Backpack Bag, Large 3 Day Assault Pack Army Molle Bag Backpacks RucksackHAOMUK Military Army Tactical Backpack Bag, Large…
• $10.49$10.49

• Fusion Tactical Military Police Patrol Belt Black Large 38-43"/2" Wide/BindingFusion Tactical Military Police Patrol Belt Black Large 38-4…
• $18.65$18.65

• SaphiRose Men's Bootfoot Chest Wader 2-Ply Nylon/PVC Waterproof Fishing & Hunting Waders with Boots Hanger for Men and Women Camouflage Men 11SaphiRose Men's Bootfoot Chest Wader 2-Ply Nylon/PV…
• $16.21$16.21
• Used, Very Good
• Only 1 left in stock - order soon.
• Eligible for FREE Shipping & FREE Returns
• Color: Camouflage
• Size: Men 11

 

[bubinga]

More oddball SHTuff

• Strapping Tools Sealer Manual Banding Tool for Polyproplyn Polyester StrapStrapping Tools Sealer Manual Banding Tool for Polyproply…
• $11.70$11.70

• PAC Strapping HD34 Heavy Duty Manual Tensioner for Polyester Strapping up to 3/4" WidePAC Strapping HD34 Heavy Duty Manual Tensioner for P…
• $36.81$36.81

• Guardian Pro Top Indoor Anti-Fatique Floor Mat, Rubber, 2'x3', BlackGuardian Pro Top Indoor Anti-Fatique Floor Mat, Rubber, 2'…
• $13.31$13.31

• SUPERIOR TOOL 05212 1/2" Internal Pipe Wrench,BlackSUPERIOR TOOL 05212 1/2" Internal Pipe Wrench,Black
• $3.17$3.17

• Bolle Safety Ultim8 Ultimate Glasses with Clear Lens, Black/Red, Clear, One SizeBolle Safety Ultim8 Ultimate Glasses with Clear Lens, Blac…
• $6.52$6.52

• Hard-to-Find Fastener 014973147457 Galvanized Anchor Bolts, Gray 5/8-11 x 8", Piece-10Hard-to-Find Fastener 014973147457 Galvanized…
• $8.13$8.13

• Rubbermaid Commercial Products FGK32 Compact Food Service Mechanical Portion Control Scale, 32 oz. with 1 pint CupRubbermaid Commercial Products FGK32 Compact Fo…
• $8.70$8.70

• HENCKELS International Forged Accent 4-pc Steak Knife Set - RedHENCKELS International Forged Accent 4-pc Steak Kn…
• $21.57$21.57

• Carlisle 3621913600 Flo-Pac Hardwood Block Garage Brush, Palmyra Bristles, 36" Block Size, 4" Bristle Trim (Case of 6)Carlisle 3621913600 Flo-Pac Hardwood Block Garage Bru…
• $28.88$28.88

• Rubbermaid Commercial Products FGF55900BL00 Premium 8-Ply Cut-End Blend Mop, 32 oz, 5" Blue Headband (Pack of 12)Rubbermaid Commercial Products FGF55900BL00 Pre…
• $26.06$26.06

• Flexzilla Pro Air Hose Reusable Fitting with Ball Swivel, 1/4 in. - RP900250BSFlexzilla Pro Air Hose Reusable Fitting with Ball Swivel, 1/4…
• $3.43$3.43

• Winters PEM220LF PEM-LF Series Pressure Gauge, 4" Dial size, 1/4" NPT, 0/30 vac/kpa, ±3-2-3% accuracyWinters PEM220LF PEM-LF Series Pressure Gauge, 4" Di…
• $7.13$7.13

Winters PEM220LF PEM-LF Series Pressure Gauge, 4" Dial size, 1/4" NPT, 0/30 vac/kpa, ±3-2-3% accuracy: Industrial Pressure Gauges: Amazon.com: Industrial & Scientific

Winters PEM220LF PEM-LF Series Pressure Gauge, 4" Dial size, 1/4" NPT, 0/30 vac/kpa, ±3-2-3% accuracy: Industrial Pressure Gauges: Amazon.com: Industrial & Scientific

www.amazon.com

I'm confused
It's says vacuum,but the description says for air compressors.
Is the description just inaccurate?

 

[vwpieces]

• Yost Vises 5" Heavy-Duty Bench Vise, Double Swivel Rotating Vise: Head Rotates 360° Vertically, Body Rotates 360° Horizontally In The Locking Swivel Base, (Model 750-E; 1-Pack)
• $79.92$79.92

• Ingersoll-Rand 117 Standard Duty Air Hammer, 117 - Tool OnlyIngersoll-Rand 117 Standard Duty Air Hammer, 117 - Tool…
• $34.90$34.90

• Chicago Pneumatic CP872 Pneumatic Straight Die Grinder with Pistol Grip and 1/4'' Collet, 27,000 RPMChicago Pneumatic CP872 Pneumatic Straight Die Grin…
• $34.14$34.14

• DeWalt DXCM024-0343 Double Arm Hose Reel with 3/8” x 50’ Premium Rubber HoseDeWalt DXCM024-0343 Double Arm Hose Reel with…
• $81.81$81.81

• Bessey BV-HD60 Heavy Duty Bench Vise, 6 In., Hammer Tone GrayBessey BV-HD60 Heavy Duty Bench Vise, 6 In., Hammer T…
• $40.35$40.35

 

[06 DIESEL]

• Bessey BV-HD60 Heavy Duty Bench Vise, 6 In., Hammer Tone GrayBessey BV-HD60 Heavy Duty Bench Vise, 6 In., Hammer T…
• $40.35$40.35

Grabbed this for a shop/house warming present for my brother. He always said he wanted a good vise, now he has one.

 

[dogdog]

Grabbed this for a shop/house warming present for my brother. He always said he wanted a good vise, now he has one.

that is a pretty decent vise, I have the 5" or 6" ones from them as well... Bessey, the old craftsman one from sears also look the same "Almost the same."

 

[InsanePyro]

Dammit, pretty ticked I missed the vise

 

[vwpieces]

• IRWIN 1913190 Irwin 18" Adj Wrench Steel Handle
• $31.46$31.46

• Shop Fox D2057A Adjustable Mobile Base, Small Charcoal Grey
• $55.25$55.25
• I bought one of these at the $75 50%off price. Heavy Duty.

• 52Pc Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit
• $44.77$44.77

• Lenox Tools 1787562 Bi-Metal Self Feed Bit, 1-3/4-InchLenox Tools 1787562 Bi-Metal Self Feed Bit, 1-3/4-Inch
• $13.20$13.20

• Irwin Industrial Tools 3046011 2-1/8-Inch 3-Cutter Self Feed Drill Bit , BlackIrwin Industrial Tools 3046011 2-1/8-Inch 3-Cutter Self Fee…
• $15.10$15.10

• Crescent Lufkin 1/2" X 91m/300' Hi-Viz® Orange Fiberglass SAE/Metric Dual Sided Tape Measure - FE300NCrescent Lufkin 1/2" X 91m/300' Hi-Viz® Orange Fi…
• $25.20$25.20

• Stalwart 75-PT1009 Non-Contact Digital Laser Infrared Thermometer w/ LCD ScreenStalwart 75-PT1009 Non-Contact Digital Laser Infrare…
• $9.48$9.48

• Arcan Underhoist Support Stand, 3/4 Ton Capacity, 12 Inch Diameter Base, Contoured Saddle, Bearing Mounted Spin Handle, Supports Vehicle Components (ALSS15)
• $55.78$55.78

• Bessey UK16 Clamp Universal 6.3In/3.15In, Black/Red/Silver
• $17.40$17.40

 

[CAMMShaft]

Grabbed the underhoist stand. Thanks VW!

CAMM

 

[60rftc]

You beat me by a second. I hope it works out. I scored the mobile base. Thank you Vdub

 

[vwpieces]

Grabbed the underhoist stand. Thanks VW!

CAMM

Ordered the same one at about same price may 7th. Still hasn't shipped. I have a Sunex already, would be the second or backup.

 

[vwpieces]

• COXREELS P-LP-425-HV Retractable Low Pressure Spring Rewind Hose Reel: 1/2" I.D, 25' Hose Capacity, with high Visibility Safety Hose, 300 PSI, Made in USA
• $179.60$179.60

 

[HotRodHudson]

I was way late on that hoist stand…. Maybe next time!!