ct71rr
Well-known member
Hello all, does anyone know if there will be another group buy on the MaxJax lift? I read in another post that there might be sometime in July (2010). I would be interested in purchasing one if there is. Any others??
Another group buy on MaxJax??
- Thread starter ct71rr
- Start date
sammm
Well-known member
Subscribed!
RAYJAY
Well-known member
X2 me also
Teken
Well-known member
X3 me too . . .
Teken
Well-known member
Can you remind us all or link us to the thread as to how it all went down and what the final out the door cost was.
sammm
Well-known member
I found this thread....didn't read thru it all yet.
http://www.garagejournal.com/forum/showthread.php?t=28374&highlight=maxjax
Teken
Well-known member
Many thanks there Sir!
Wow, I just read the entire 15 pages, what a cluster **** that was . . .
Wow, I just read the entire 15 pages, what a cluster **** that was . . .
Last edited:
M-technik-3
Well-known member
Debating getting one of these. The story is which way on the GB?
jkeyser14
Well-known member
I tried to get in on the original group buy but since the website had problems and was down for a while I missed it.
FlameOut
Well-known member
I was in on the original group buy. I didn't even have my garage built at the time, but had my MaxJax ready to go when I did finally build it
I just got an email back from Rudy Muro at Dannmar and they are will do another group buy for $1900 including shipping. I actually just ordered one! He also has the motorcycle adapter for $42 and a rolling work seat for $29 available.
See his note below:
Cheers, Eric T.
Please get the word out. I can offer special price of 1900.00 thru June 30th. Please allow for 2-3 week delivery. Customer is responsible for off loading. Must contact Rudy Muro at Dannmar Equipment and mention Garage Journal group buy to get special price.
Rudy Muro
Sales Manager
[email protected]
1-877-432-6627
1-805-207-3237 Cell
646 Flinn Avenue Suite A
Moorpark, CA 93021
Telephone: 877-432-6627 Fax: 805-530-1909
www.dannmar.com
http://www.hubgarage.com/mygarage/Dannmar
See his note below:
Cheers, Eric T.
Please get the word out. I can offer special price of 1900.00 thru June 30th. Please allow for 2-3 week delivery. Customer is responsible for off loading. Must contact Rudy Muro at Dannmar Equipment and mention Garage Journal group buy to get special price.
Rudy Muro
Sales Manager
[email protected]
1-877-432-6627
1-805-207-3237 Cell
646 Flinn Avenue Suite A
Moorpark, CA 93021
Telephone: 877-432-6627 Fax: 805-530-1909
www.dannmar.com
Ender-DI
Active member
Whoa, way cool!
sammm
Well-known member
Marauder470
Well-known member
- Joined
- Jun 4, 2010
- Messages
- 166
Where are these lifts made? USA?
I think it's in China. If it really bothers you, you'll have limited choice in lift. Mohawk is the only one I know it's fully made in USA.
Marauder470
Well-known member
- Joined
- Jun 4, 2010
- Messages
- 166
Thanks for the information. I'm not interested in a lift made in China.
Hey All, I'm a new poster but have been lurking for a long time.
Thanks for the head's up! I just placed my order with Rudy. He was very nice and got back to me superfast and answered all of my questions. I paid a little extra for lift gate service but seeing as I don't have anything to get it off the truck, I think it was money well spent. I'm still saving close to $250 off of Northern Tool's price.
Now I will need to start a post about my garage floor to get the lift installed...
Thanks Rudy!
Thanks for the head's up! I just placed my order with Rudy. He was very nice and got back to me superfast and answered all of my questions. I paid a little extra for lift gate service but seeing as I don't have anything to get it off the truck, I think it was money well spent. I'm still saving close to $250 off of Northern Tool's price.
Now I will need to start a post about my garage floor to get the lift installed...
Thanks Rudy!
Seanbev24
Well-known member
How much extra did the lift gate service cost?
I'm signing the closing papers on the new house in the next couple days. I know what I'm buying for the new garage
I'm signing the closing papers on the new house in the next couple days. I know what I'm buying for the new garage
Teken
Well-known member
How much extra did the lift gate service cost?
I'm signing the closing papers on the new house in the next couple days. I know what I'm buying for the new garage
+1, would like to know what they ask for the lift gate service. Which BTW is total bull **** . . .
UPSHIFT
Well-known member
How much extra did the lift gate service cost?
I'm signing the closing papers on the new house in the next couple days. I know what I'm buying for the new garage
Gents,
The liftgate fee is $100.00, or you can pick it up at a local freight terminal for freeeee..
Thanks,
Teken
Well-known member
Gents,
The liftgate fee is $100.00, or you can pick it up at a local freight terminal for freeeee..
Thanks,
Thanks for the clarification . . . This will sound retarded but I am going to ask anyways.
If I don't pay for lift gate service, its not like I can't take each piece off the truck one at a time just to get the mother off right?
Ender-DI
Active member
Damn, I'm not going to be able to buy until end of July. What's the regular pricing on these?
sammm
Well-known member
After eyeing this lift for 3 yrs I finally have the financial resources to buy one and I'll be calling in my order on Monday! It ***** that the price for this lift seems to keep increasing every couple of months but oh well I guess it keeps its resell value I guess... Not that I'll ever sell it. I hope there is a good stock of these because I've notice they keep going on back order at northern tools. I can't wait to get this in.
Hi All,
I went by Danmar and met with Rudy ts afternoon. He was nice enough to take me back and let me see one of the lifts assembled and bolted down to the floor before placing my order. It looks like it'll be a great tool for working on my cars. Thanks for the group buy being put together and I look forward to installing this lift in my garage.
Thanks,
Joel
I went by Danmar and met with Rudy ts afternoon. He was nice enough to take me back and let me see one of the lifts assembled and bolted down to the floor before placing my order. It looks like it'll be a great tool for working on my cars. Thanks for the group buy being put together and I look forward to installing this lift in my garage.
Thanks,
Joel
Just got a call from Rudy saying that the Group Buy price was reduced to $1,800, so he adjusted my price proactively.
Even better, he said that the lift will ship today, instead of 3 months out. Awesome!
How's that for customer service? Now I need to get crackin' on my garage floor...
Even better, he said that the lift will ship today, instead of 3 months out. Awesome!
How's that for customer service? Now I need to get crackin' on my garage floor...
Interex
Well-known member
Holy ****! I was going to hold off a little longer to get this but at $1800 shipped, I don't think I can come up with enough reasons not to!
Seanbev24
Well-known member
I ordered mine on the 30th for $2000 shipped (got liftgate service). I woke up this morning with a message from Rudy, saying my order has been reduced $100 because of the new group buy price. If the lift is near as good as the customer service, I'll be a happy guy.
tatra
Well-known member
picked mine up in a standard 8 foot pickup box...........unloaded pece by piece off the truck at home..........ad a buddy help me but wasn't absolutly necessary..........teken, pick up in the peg is reimers on inkster..........first you have to clear customs by the airport............due to nafta , don't volounteer that parts are made in china.........