To avoid these ads, REGISTER NOW!

Belt or orbital sander

barnettnce

Member
Joined
Sep 21, 2019
Messages
5
Location
Birmingham
While I have a larger job I use my belt sander, maximum of the rest of the time I use my random orbital sander. I very rarely use my quarter-sheet sander, but there are times when it fits better on a job.
 
To avoid these ads, REGISTER NOW!

OccupantRJ

Well-known member
Joined
May 15, 2009
Messages
11,365
Location
Eastern North Carolina
I run most every type of sander normally available, but I am using them on machinery instead of wood. I lost a vibratory finishing sander in a flood 20 years ago, and never bothered to replace it. The handheld belt sander is my next least used sander, as I do not do much woodwork anymore. I could fill up a commercial wheelbarrow with the various sanders and grinders I have in the shop. Each one gets used, and they all have their place in doing so.
 

jonshonda

Well-known member
Joined
Jul 17, 2017
Messages
4,752
Location
Wisconsin
Is this a question, an answer, or just rambling? Bosch 1250DEVS is said to be a great compromise between belt and orbit
 

Downwindtracker 2

Well-known member
Joined
Jun 13, 2019
Messages
1,715
Location
BC
For most my woodworking I use a Makita 3x24 loaded with 120 grit and a DeWalt 1/4 sheet loaded with 220 grit, stearate coated. Finish sanding, between coats of varnish. I have an early Bosch 5" RO . It's too rough running for steady use.
 
To avoid these ads, REGISTER NOW!

Parrothead

Well-known member
Joined
Apr 27, 2014
Messages
5,346
Location
Earth
OR???

Clearly you’re new to Garage Journal. There is no “or” here. You buy both, sometimes in duplicate. You’re welcome.
 
To avoid these ads, REGISTER NOW!
Top Bottom