To avoid these ads, REGISTER NOW!

BendPak 4 Post / 2 Post Lift Group Buy

6

66dave

Well-known member
Joined
Nov 28, 2010
Messages
197
Location
Boise!
Mystic195 said:
Here is the clarification on the shipping and tax. Shipping is included to a commercial address.

Otherwise these are the 3 options: There is a $40 fee for a residential address.

"Because of the weight of the lifts they would not be able to be lift gated. Customer would have to have a forklift available at the time of offloading. (I have heard of people using an engine hoist as well.)

If they do not have a forklift available we would be able to get it shipped to the closest Con-Way dock. Con-way would then be able to load the lift onto the customers trailer for them.

Our third option would be to get a quote from one of our certified installers in their area to deliver it to the customers home."

There is no tax unless it is shipped to California.
Click to expand...


I paid a flat bed tow truck to pick it from the dock and then tilt the bed to side it into my shop, best $100 I ever spent!!!:beer: the 4 post was very easy to install once it was in the shop, all I needed was a cherry picker.
 
To avoid these ads, REGISTER NOW!
OP
M

Mystic195

Well-known member
Joined
Oct 28, 2009
Messages
265
All PM's returned on price lists. We are standing at 9 lifts out of the 12+ needed.
 
F

Farhan

Active member
Joined
Jan 28, 2014
Messages
36
Location
West Chicagoland
I tried PM'ing but not sure if it went through.

I'd be in for a blue HD-9SXW depending on the groupbuy price. Wouldn't mind seeing a complete price list, either. Very interested, please let me know. Thanks!
 
D

dhoyle

Member
Joined
Apr 30, 2009
Messages
7
Looking for an XPR-10A shipped with the 8.5" anchors for their PL-6000 model.

Can they ship Conway which has a loading dock that my installer can get the lift right off of?
 
T

TheWhiteMamba

Well-known member
Joined
Aug 20, 2013
Messages
121
Location
The Armpit of California
Hey Mystic,

I am interested in a 2-post and the mid-rise price list. I also have a work buddy about to pull the trigger on a 4-poster. Could you send me the price lists on those please? Thanks!
 
OP
M

Mystic195

Well-known member
Joined
Oct 28, 2009
Messages
265
Price lists sent. Still holding at 9 lifts confirmed. If we can't get to 12+ then these prices aren't valid. We would still qualify for the 5+ pricing but it is higher than what was sent out.
 
W

wu88

Member
Joined
Nov 15, 2008
Messages
13
whats the timeframe on meeting the 12 and getting orders placed? Oct 1 was it?
 
To avoid these ads, REGISTER NOW!
OP
M

Mystic195

Well-known member
Joined
Oct 28, 2009
Messages
265
Yep, October 1st will be the end of it. The problem with placing any orders until we have the 12+ is that BendPak will not honor the pricing and it will be sold under the 5+ pricing. They are willing to hold all of the orders until Oct 1st but I was trying to make sure we had the pricing before anyone placed their orders.
 
B

BlackTalon

Well-known member
Joined
Aug 22, 2014
Messages
183
Location
Alexandria, VA
I won't be able to commit until mid-September, so hopefully you can hit 12+ in the next few days and the ones who need one ASAP can place orders.
 
W

wu88

Member
Joined
Nov 15, 2008
Messages
13
Mystic195 said:
Yep, October 1st will be the end of it. The problem with placing any orders until we have the 12+ is that BendPak will not honor the pricing and it will be sold under the 5+ pricing. They are willing to hold all of the orders until Oct 1st but I was trying to make sure we had the pricing before anyone placed their orders.
Click to expand...

ya agree. given its only been a couple days, thinking the 12 will happen
 
T

TurboDriver

New member
Joined
Aug 25, 2014
Messages
3
Mystic-

I am in! HD9XW. Thanks for coordinating. I don't need it until December, but for these savings I am willing to order whenever we get at least 11 more.

I appreciate your efforts here.
 
B

baducduc

Member
Joined
Dec 29, 2013
Messages
23
Forgive my ignorance, but what is a ConWay and would this order be going directly through Bendpak or through a distributor.

C'mon folks let's get to 12 - I'm ready to order now! Thanks
 
M

Mustangous

Member
Joined
Apr 26, 2013
Messages
8
Location
Central NJ
Im interested in a 2 post and 4 post... I pm-ed you but i dont see it in my sent folder.
Thanks for doing all this leg work!
Troy
 
D

dhoyle

Member
Joined
Apr 30, 2009
Messages
7
Mystic195 said:
Yep, October 1st will be the end of it. The problem with placing any orders until we have the 12+ is that BendPak will not honor the pricing and it will be sold under the 5+ pricing. They are willing to hold all of the orders until Oct 1st but I was trying to make sure we had the pricing before anyone placed their orders.
Click to expand...

You can put me down as a definite. What does this bring your total number to?
 
E

ezover

Well-known member
Joined
Jan 15, 2008
Messages
2,412
Location
3rd rock from the sun
mystic, what will be the cut off date 10/1?? i am doing the bendpak / mowhawk debate atm.

having a hard time with the added cost for my very limited useage.

i am sure at the end of the day you can count me in, but but, lol.
 
E

ezover

Well-known member
Joined
Jan 15, 2008
Messages
2,412
Location
3rd rock from the sun
can anyone point out why one would order the xpr 10 a, instead of the xpr 10 a LP ?

i seen no difference except the LP will work on cars with a lower ground clearence.

why would you not order the unit that will give you more lifting options?

none of my cars would every require the LP unit, but i see no reason not to order it.

any input from those in the know would be great, thanks.
 
T

TheBadDog

Well-known member
Joined
Dec 9, 2012
Messages
112
Location
Phoenix
Thank you, but I’m afraid I’m going to bow out of the group buy.

As I mentioned earlier, I was ready to pull the trigger on a deal months ago, but ran into problems with my slab that delayed me. The guy I worked with then gave me what I felt was a smoking deal, he knew the product, and spent a lot of time helping me figure out what I needed (and what I didn’t). Then when I measured my concrete and determined the problem, he not only explained to me what needed to be done, but he also sent me approved design documents detailing how to safely provide the needed improvements.

Anyway, when I got the price I realized that it wasn’t that much less than what I was quoted months ago. I wanted to make an informed decision and thought maybe there had been a price increase, so I called him back. Nope, same price as before, and comparable to this group price, and even then still the same helpful friendly attitude.

In the end, I decided that this guy spent a lot of time paying attention to my needs and helping me all along the way. In my experience, that’s something rare today, and gives me confidence of good support should there be a problem later. The small amount that this group buy would save me doesn’t come close to enough to make me forego what he’s done to earn my business. As they say, price isn’t everything (and it’s basically nothing in this case), so I’m going to keep my order with him.

If this doesn’t work out, you need it quicker, or if you just have questions or need advice I would suggest calling him. He agreed to let me post his name and contact below for anyone interested in contacting him. And to be clear, I have absolutely NO connection or affiliation with this company or the contact person, other than being a very satisfied soon-to-be customer.

Dave Shedlock
877-533-7524 (x101)
WORKSHOP DEPOT
[email protected]
 
D

dschmit

Well-known member
Joined
Sep 6, 2011
Messages
64
Location
Nebraska
Not sure, but the way I see it in the specs, the 10-A uses 3 stage front arms and reach farther than the 2 stage 10 A LP. And 4 inch pa height vs the lp with 3 1/2 inch pad height.
 
T

TheBadDog

Well-known member
Joined
Dec 9, 2012
Messages
112
Location
Phoenix
ezover said:
can anyone point out why one would order the xpr 10 a, instead of the xpr 10 a LP ?
Click to expand...
Oddly enough, that's one of the exact questions I just asked Dave earlier today. Turns out the LP has a slightly less "reach". I described my vehicles, including a Crew Cab 4x4 to a Grand Prix GTP Comp-G (the lowest thing I own). He didn't feel I needed the LP, and that the added reach/range would be more important for me.
 
OP
M

Mystic195

Well-known member
Joined
Oct 28, 2009
Messages
265
I was going to buy a Bendpak and thought I would try and help everybody save a few bucks if we could do a group buy. BendPak has set the pricing and everyone will order thru them directly.
 
Last edited:
E

ezover

Well-known member
Joined
Jan 15, 2008
Messages
2,412
Location
3rd rock from the sun
dschmit said:
Not sure, but the way I see it in the specs, the 10-A uses 3 stage front arms and reach farther than the 2 stage 10 A LP. And 4 inch pa height vs the lp with 3 1/2 inch pad height.
Click to expand...

thank you, i think i will opt for the longer reach, on the very rare occassion i need another 1/2 inch i can place something on the floor.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom