Best silicone spray?

[Gravediggaz]

Looking for recommendations on the best silicone spray to get?

Thanks

 

[nadogail]

I buy mine at Home Depot, I am not smart enough to be able to question any difference between the various sprays offered.

 

[mv213]

For generic chemicals like that, I always get the CRC brand. They have a nice line of products available at Amazon and other places.

 

[no704]

In my brief experience with locksmiths (8 years) every one has a can of tri-lube.

 

[Doozer75]

In my brief experience with locksmiths (8 years) every one has a can of tri-lube.

Because Houdini Oil is too expensive.

-Doozer

 

[scooby074]

I like the Ford Motorcraft silicone spray.

 

[jayemm]

This is what I bought last time at Menard's. The 11 oz, can for $5.99.

 

[dchawk81]

This is what I bought last time at Menard's. The 11 oz, can for $5.99.

Heavy duty.

For those things that need to be really slippery.

 

[jayemm]

Heavy duty.

For those things that need to be really slippery.

Hmmm. Think I'll buy another can now that I'm feeling *****.

 

[Beauregard]

What silicone spray tastes the best when frying your spuds on the Blackstone?

 

[Jeepster04]

In my brief experience with locksmiths (8 years) every one has a can of tri-lube.

Got a link? Or is it this stuff? Tri flow?

tri lube - Google Search

 

[no704]

Yes tri flow. Super lube is also, well super!

 

[Pate]

I sell all the major lubes and Tri flow has gotten ridiculously expensive. Houdini is 1/2 the cost now. Superlube has instituted huge minimum orders so 3/4 of their dealers stopped selling it.

 

[NUTTSGT]

Thread cleaned up. Keep it on track guys and girls.

 

[BillK]

One thing to keep in mind is most of the "silicon" sprays also have petroleum products in them. Not a good thing if you are going to use it on any rubber parts. You can find it without petroleum but you have to do some searching.

I found this out when I bought my first RC Helicopter. It recommended using silicon spray for the tail rotor drive belt but had a big note to make sure it did not contain petroleum products.

 

[niget2002]

The current can I'm using is liquid wrench branded silicone spray.

 

[Notgrownup]

I use PB blaster, seems as good as any other I’ve used

 

[losdudes]

AMSOIL has a good silicon spray. I recently cleaned our vinyl window frames as the slider tracks were full of dirt and hard to open and close. After cleaning the tracks and applying the spray, you have to be careful to not close too hard and cracking the glass.

 

[Sumboodie]

I can't think of anything that would need it. I use Fluid Film in most things that need lube or rust proofing.

 

[Stick-man]

I used to use 1stAyd products, and their silicone was fine.

 

[teknikfrog]

I'm partial to this: