To avoid these ads, REGISTER NOW!

Between 485 & 705 SQ/FT Bob Heine's Auto Emporium

Workspaces between 485 and 705 squarefeet.

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
36,077
Location
Pacific Northwest
Bob: great FAMILY PICTURE!!

also looks like maybe there was an older guy there in the group than you. is he and is he your dad, older brother or maybe an in-law?

another little one to learn the ways of the world from his (or her) Gramps is a lucky. grandson or granddaughter or are they waiting to find out in a few days?

it also looks like all this garage and shed time is keeping you young and happy.

again MERRY CHRISTMAS and here's to another great year next year.
 
To avoid these ads, REGISTER NOW!

don long

Well-known member
Joined
Mar 31, 2012
Messages
8,860
Location
southern california
Bob
I want to jump in here and wish you and you family a Merry Christmas.
It's always fun to gather the family for a group shot and this is the season.

Good job

I'm looking forward to spending more time here following your adventures and projects

Don
 

driftpin

Well-known member
Joined
Dec 22, 2016
Messages
11,326
Location
Miami-Dade/Broward Co. Florida
Merry Christmas to the guy who makes me laugh, writing about his projects and life experiences. Best wishes in the holiday season to your family and to you.

Today is Noche Buena in our household, the Cuban traditional huge feast. We have two pork roasts, lots of side dishes like yuca, tostones, congris (white rice and black beans, mixed) and fried plantains. We're expecting a dozen family and friends.

I spent a bit of time yesterday installing a new 120 volt/20 amp GFCI box in a die-cast box, w/one of those 'in-service' plastic covers that allows you to keep the lid closed, and the extension cord plugged-in, so it stays nice and dry during the FL hurricanes. The purpose in the short-term was to provide a much-shorter drop cord run to the nativity scene we have in the backyard, for its internal illumination. There is also a Santa in his sleigh with reindeer needing a power source, Santa is wired for support into the palm trees next to the pool patio. At night, with the Three Wise Men marching-down one side of the pool towards the manger where Mary, Joseph, the shepherd and a lamb are waiting, the reflections off the pool water in the dark backyard actually look pretty. They're as-old as the kids, the oldest of-whom is approaching age 50.

Plus, for all my work on the side of the house, or for something to do in the backyard, I have another power source. I also have a 30 amp 240 volt access point, outside by the 120 volt GFCI duplex outlet.
 

Attachments

  • Nativity.01.jpeg
    Nativity.01.jpeg
    54.1 KB · Views: 41
Last edited:
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
Bob thank you for sharing your family gathering.:thumbup:

To you and yours have a Merry Christmas and a happy New Year.xmas
Thank you Steve!
Great family photo. Merry Christmas Bob. Now get those people back inside before they catch their death.
John, you can tell by the sweater Liane is wearing that it's below 80.
Excellent pic, and great day it seems.

Omelette is a great option
Rian, thank you and there's no chance of a full English breakfast so I'm very happy with an omelette that I didn't have to cook.
Great family pic Bob.

Merry Christmas!

Bret
Hi Bret, thanks for stopping by!
Merry Christmas and a happy new year to you and your family!

Sent from my LG-H918 using The Garage Journal mobile app
Eugene, thank you and the same back at you.
Great picture! You have a nice looking family, genetics is weird that way some times.

Have a very Merry Christmas my Feeble Brother!:bowdown:
Andy, my children are blessed with a father full of recessive genes. And thank you very feebly back,
Bob: great FAMILY PICTURE!!

also looks like maybe there was an older guy there in the group than you. is he and is he your dad, older brother or maybe an in-law?

another little one to learn the ways of the world from his (or her) Gramps is a lucky. grandson or granddaughter or are they waiting to find out in a few days?

it also looks like all this garage and shed time is keeping you young and happy.

again MERRY CHRISTMAS and here's to another great year next year.
Thank you Drives. The man to the left of Liane is our daughter's father-in-law. He's ten years older (to the day) than Liane.

They had one of those gender reveal parties several months ago (before the baby shower) and it was blue dust everywhere. I'm told that means it's going to be a boy. She is due the first week of January but she's being induced on the 27th. Makes sense financially I guess.
Bob
I want to jump in here and wish you and you family a Merry Christmas.
It's always fun to gather the family for a group shot and this is the season.

Good job

I'm looking forward to spending more time here following your adventures and projects

Don
Don, thanks for taking time to come here and post. Based on all the paint you've been slinging lately it's a really pleasant surprise. Pretty soon I'm going to need access to bleachers to get everyone in the picture.
Bob I envy you as my family is 1000 miles away. Merry Christmas to all of you and a brighter New Year!
Bobby, I know what you mean. Our daughter moved to Ohio for a few years and it was tough getting together.
Merry Christmas Bob! xmas


:beer:
Dan, thank you and if I didn't already, here's wishing you and yours a Merry Christmas and Happy New Year!
Merry Christmas to the guy who makes me laugh, writing about his projects and life experiences. Best wishes in the holiday season to your family and to you.

Today is Noche Buena in our household, the Cuban traditional huge feast. We have two pork roasts, lots of side dishes like yuca, tostones, congris (white rice and black beans, mixed) and fried plantains. We're expecting a dozen family and friends.

I spent a bit of time yesterday installing a new 120 volt/20 amp GFCI box in a die-cast box, w/one of those 'in-service' plastic covers that allows you to keep the lid closed, and the extension cord plugged-in, so it stays nice and dry during the FL hurricanes. The purpose in the short-term was to provide a much-shorter drop cord run to the nativity scene we have in the backyard, for its internal illumination. There is also a Santa in his sleigh with reindeer needing a power source, Santa is wired for support into the palm trees next to the pool patio. At night, with the Three Wise Men marching-down one side of the pool towards the manger where Mary, Joseph, the shepherd and a lamb are waiting, the reflections off the pool water in the dark backyard actually look pretty. They're as-old as the kids, the oldest of-whom is approaching age 50.

Plus, for all my work on the side of the house, or for something to do in the backyard, I have another power source. I also have a 30 amp 240 volt access point, outside by the 120 volt GFCI duplex outlet.
Philip, thank you for the kind words. We had brunch at our son's home Saturday and will have a nice lunch at our dauther's home tomorrow. I'll be warming up a standing rib roast New Year's Eve for the two of us (sorry Ellie, three of us).

We don't have anyone stopping by and all the celebrations happen at either our son's home, his son's home or our caughter's home. For that reason (and I'm getting lazy) we don't put out much in the way of decorations for the Holidays. We didn't even change the wreath on the front door but Liane put out a 6-inch tall tree on the dining room table to remind us of the season.

I've got a lot (too much) stuff that's older than my children. The little guy turned 55 this year.

Great family photo. Nice that everyone can come together to celebrate. Merry Christmas.
Thank you Stewart!
Happy Christmas to you and yours, and yours is a good looking bunch.
Thank you Kirk! I think they get their good looks from Liane. In the right light she even makes me look OK.
 

Duker

Well-known member
Joined
Sep 25, 2010
Messages
10,868
Location
Livingston, TX
Merry Christmas to the guy who makes me laugh, writing about his projects and life experiences. Best wishes in the holiday season to your family and to you.


^^^ This... Can’t day it any better myself! Merry Christmas!



Sent from my iPad using Tapatalk Pro
 

Lyndon

Well-known member
Joined
Aug 11, 2014
Messages
2,535
Location
Sydney, Australia
Bob

I hope you and Liane, and the rest of the Heine clan, have had a tummy filling Christmas day, and are now relaxing into the evening in a comfy big lounge chair!

Enjoy it all, and here's to 2019 being a resounding success for all.

Lyndon
Recovering from a big day yesterday.
 
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
Merry Christmas Bob, and a happy new year mate
Thank you Mat!
^^^ This... Can’t day it any better myself! Merry Christmas!



Sent from my iPad using Tapatalk Pro
Thank you Duker, you are very kind.
Bob

I hope you and Liane, and the rest of the Heine clan, have had a tummy filling Christmas day, and are now relaxing into the evening in a comfy big lounge chair!

Enjoy it all, and here's to 2019 being a resounding success for all.

Lyndon
Recovering from a big day yesterday.
Lyndon, we had lunch with our daughter and her family yesterday and did our best not to over-eat. I felt pretty good only going back for seconds. I'm relaxing now that it's boxing day (not celebrated much in the US) and tackled a little project in the garage.
 
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
Twas the night before Christmas and all through the house not a creature was stirring except for Bob.

Liane doesn't like a quiet house so there is always a TV on somewhere. As soon as the TV goes off (around 9:00 PM) an audio book gets turned on. The intercom system carries the sound to the master bedroom and there was no sound coming out Christmas Eve. I pushed buttons and twisted dials until I discovered I could get the sound back by holding down the END CALL button. Not wanting to take anything apart, I wedged a screw between the speaker housing and the END CALL button.

Now I have a problem. If I remove the master station to repair it, someone won't be lulled to sleep (and I may be put down). I'm hoping the wedged button works for a little while so I can make a more permanent fix. I can run some speaker wire from the audio system in the garage into the attic and down into the master bedroom, where I can hook up a pair of speakers.

This is a perfect opportunity to put a couple of Mini Advent bookshelf speakers to work. I don't remember where I got them but I didn't spend $10 on the pair. They've been in the garage for at least the past 22 years so I thought I'd inspect them while waiting for some speaker wire and a cheap multi-speaker amplifier. Not surprisingly, once I had the grilles off, the speakers needed a little repair.
attachment.php


The 5-1/4 inch speakers need new foam rings so I ordered a pair. The foam no longer has any life left and are not even attached to the speaker cone.
attachment.php


According to YouTube I need to clean all the glue and foam residue and suggested a box cutter to scrape it off the metal frame. I had a better idea, remembering the cheap set of wood carving chisels I bought from Harbor Freight. It worked perfectly.
attachment.php


Now I just have to wait for stuff to be delivered....
 

Attachments

  • Advent Speakers 1.jpg
    Advent Speakers 1.jpg
    127.3 KB · Views: 336
  • Advent Speakers 2.jpg
    Advent Speakers 2.jpg
    89.1 KB · Views: 333
  • Advent Speakers 3.jpg
    Advent Speakers 3.jpg
    86.6 KB · Views: 332

jbmatth

Well-known member
Joined
Jun 3, 2013
Messages
5,692
Location
Northern Ok.
Bob, I've never heard of replacing the foam in a speaker before, is that very common? Did you verify the speaker still worked before ordering the foam? :lol_hitti

JB
 

Duker

Well-known member
Joined
Sep 25, 2010
Messages
10,868
Location
Livingston, TX
Twas the night before Christmas and all through the house not a creature was stirring except for Bob.

Liane doesn't like a quiet house so there is always a TV on somewhere. As soon as the TV goes off (around 9:00 PM) an audio book gets turned on. The intercom system carries the sound to the master bedroom and there was no sound coming out Christmas Eve. I pushed buttons and twisted dials until I discovered I could get the sound back by holding down the END CALL button. Not wanting to take anything apart, I wedged a screw between the speaker housing and the END CALL button.

Now I have a problem. If I remove the master station to repair it, someone won't be lulled to sleep (and I may be put down). I'm hoping the wedged button works for a little while so I can make a more permanent fix. I can run some speaker wire from the audio system in the garage into the attic and down into the master bedroom, where I can hook up a pair of speakers.

This is a perfect opportunity to put a couple of Mini Advent bookshelf speakers to work. I don't remember where I got them but I didn't spend $10 on the pair. They've been in the garage for at least the past 22 years so I thought I'd inspect them while waiting for some speaker wire and a cheap multi-speaker amplifier. Not surprisingly, once I had the grilles off, the speakers needed a little repair.
attachment.php


The 5-1/4 inch speakers need new foam rings so I ordered a pair. The foam no longer has any life left and are not even attached to the speaker cone.
attachment.php


According to YouTube I need to clean all the glue and foam residue and suggested a box cutter to scrape it off the metal frame. I had a better idea, remembering the cheap set of wood carving chisels I bought from Harbor Freight. It worked perfectly.
attachment.php


Now I just have to wait for stuff to be delivered....



Ah.... there is a past time I do not miss... replacing speaker surrounds.... I used to make sub-woofers in college for beer money using EV speakers or old Klipsch I would find then later for designers whose Client’s husbands wanted surround sound but the wife didn’t want anything that looked like a speaker so I would build them into coffee tables, art stands etc.


Sent from my iPad using Tapatalk Pro
 

dchance

Well-known member
Joined
Oct 3, 2016
Messages
614
Location
OKC
Have great New Year. It is good to see the family together.

Interesting to see the speaker repair. Waiting on the next installment. I have the first set i bought that I need to do that to.

Dwight
 
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
Bob, I've never heard of replacing the foam in a speaker before, is that very common? Did you verify the speaker still worked before ordering the foam? :lol_hitti

JB
JB, I had only seen this done recently. In the past I just bought new speakers when they came apart. So you're saying I might be wasting my time and money because I have no idea if these speakers even work? It didn't occur to me they came my way because they didn't work.

OK, I went to the garage and used my sophisticated speaker test setup and it turns out they work!
attachment.php


In the above photo, the black blob above the iPod is the screw holding the END CALL button depressed.

The replacement foam kit arrived this afternoon so maybe I can get that job done tomorrow.
Ah.... there is a past time I do not miss... replacing speaker surrounds.... I used to make sub-woofers in college for beer money using EV speakers or old Klipsch I would find then later for designers whose Client’s husbands wanted surround sound but the wife didn’t want anything that looked like a speaker so I would build them into coffee tables, art stands etc.


Sent from my iPad using Tapatalk Pro
Duker, I am always fascinated by the money-making work that college students find. I attended college at night and my full-time job provided milk money for my kids. On the plus side, night school attendees were older and Marist College had a Student/Faculty mixer every semester. The mixer was over when the last bottle of liquor was empty. That was back when drunk driving was a sport.
Have great New Year. It is good to see the family together.

Interesting to see the speaker repair. Waiting on the next installment. I have the first set i bought that I need to do that to.

Dwight
Hi Dwight, thanks for stopping by and I hope you and yours have a great new year as well.

From the instructions I just read, this looks like a pretty easy project.
 

Attachments

  • Advent Speakers 4.jpg
    Advent Speakers 4.jpg
    86.7 KB · Views: 224
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
I had very little to do with this next project. My oldest grandson's wife did all the labor and my grandson did his tiny but important part. She had hoped to deliver naturally but things took a turn and she had to have an emergency C-Section. Mother and child are doing fine. My second great grandson joined the family too late for the picture but in time to become a dependent (tax deduction). I'm too old for this -- he already knows more about smart phones than me.
attachment.php
 

Attachments

  • 2018-12-27 Spencer Collin Heine.jpg
    2018-12-27 Spencer Collin Heine.jpg
    112.5 KB · Views: 228
To avoid these ads, REGISTER NOW!

dchance

Well-known member
Joined
Oct 3, 2016
Messages
614
Location
OKC
I think your part starts now. You are supposed to spoil them and then send them home.

Dwight
 

Toolfool

Well-known member
Joined
Aug 22, 2011
Messages
4,985
Location
Tallahassee, FL
Congratulations Bob. The Heine tree keeps growing.
My Mom got to meet her first great-grandson before she passed earlier this year.
 

JCQuick

Well-known member
Joined
Nov 29, 2008
Messages
4,933
Location
Apopka Fla.
Bob Congrats on the new great grand child :bowdown: I was down your way a few weeks ago for my 5th grand child's Christening Coral springs and my sons FIL is also a former IBM guy
 

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
36,077
Location
Pacific Northwest
Bob: congrats on the new great grandson!!! sorry to hear your grandson's wife had some issues with delivery, but sounds like she's doing ok now.

I'm surprised you are trying to repair those little speakers cause I would have tossed them and i barely throw anything away. i'm always learning something when I click on your thread and this is just another thing added to the list.

hope you 2019 is even better than 2018 was.

cheers
 

oldironfarmer

Well-known member
Joined
Jun 25, 2016
Messages
6,664
Location
Terlton, Oklahoma
Drums and horns. Drums are great for developing coordination, and horns and whistles are great for developing lungs.

Drives:

If you throw out an old speaker at least keep the magnet.:bounce:
 

cbacres

Well-known member
Joined
May 28, 2010
Messages
5,998
Location
SW Florida
Bob, congrats on the great grand child. Hopefully his generation will find this forum and see what a legend his great grandpa is.

Hope you had a Merry Christmas and have a happy new year.
 
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
Congratulations Bob:thumbup::thumbup:
Thank you Steve!
So is that Great Grandad Bob now? Congratulations.
Thank you Simon! I doubt my name will change from Grandpa Bob. My mother was always Grandma Alice to her great grandchildren. Kinda like calling a second cousin twice removed "Cousin Mary" rather than ????
I think your part starts now. You are supposed to spoil them and then send them home.

Dwight
Dwight, I haven't had a chance to interact with my great grandsons yet but I do have plans. Drums and horns are on the list....
Congratulations Bob. The Heine tree keeps growing.
My Mom got to meet her first great-grandson before she passed earlier this year.
Thank you John! My paternal grandmother Mabel passed away when I was 3 but her mother Estelle lived another 6 years so I remember her well. Our birthdays were close -- hers was celebrated the day after mine. Estelle was born during the Civil War and I was born during the Second World War so we were kindred spirits. She also had a great sense of humor. She died on the fourth of July at age 88. I always thought of her as ancient but now that I'm 74 it feel like she was in her prime when she died. :confused:

In a world of weird coincidences, Liane's was celebrating her 4th birthday on the day grandma Mabel died.
Congratulations Bob!
Thank you Mick!
Bret
Thank you Bret!
He's an adorable tiny Heine.
Mick, you're right! In a few years he'll grow into one of the family nicknames my father came up with. My brother was Big B. Heine and I was Kissme B. Heine.
Bob Congrats on the new great grand child :bowdown: I was down your way a few weeks ago for my 5th grand child's Christening Coral springs and my sons FIL is also a former IBM guy
Thank you JC. In today's world five grandchildren is a big deal. Your IBM relative probably remembers the "Good Old Days" at IBM. It's a different but still great company.
Thank you Andy!
Bob: congrats on the new great grandson!!! sorry to hear your grandson's wife had some issues with delivery, but sounds like she's doing ok now.

I'm surprised you are trying to repair those little speakers cause I would have tossed them and i barely throw anything away. i'm always learning something when I click on your thread and this is just another thing added to the list.

hope you 2019 is even better than 2018 was.

cheers
Thank you Drives! Our grand-daughter-in-law had a temperature spike and labor slow down so the doctors recommended a C-Section. Little Spencer came out with his umbilical cord wrapped twice around his neck so it was a good decision. He's keeping up a family tradition -- I was born with the cord around my neck shortly before Dr. Quick (yeah, it was ironic) arrived at the hospital. The nurse knew what to do so here I am.

I too would have thrown out those speakers a few years ago but two things changed my mind. Our Saver, Vieux, and my brother Andy. The kit to fix the speakers was about $27 and I doubt I could find a comparable set for that price. Like you, I'm trying to organize my stuff and moving those two speakers from the top of a garage cabinet to the master bedroom frees up another cubic foot of space -- every little bit counts.

Because there were no family funerals, dismemberments or convictons in 2018, I can't imagine 2019 being better (my bar is pretty low).
Congratulations Bob, I bet you'll be a really great great-grandfather. [emoji4]

Sent from my SM-G950F using The Garage Journal mobile app
Thank you Mark! My first great-grandson was born to a doomed relationship and lives in a 50-50 custody world. His father and grandfather will see him a lot more than me and I'm fine with that. The other issue is trust in me. I was quite capable of changing diapers one-handed but only Liane witnessed it. I'll get my hook into them when they're a bit older.
Tiny Heine, that’s a great nick name, health and happiness to Spencer and his family
Bob, I think he needs a big drum kit, he’ll love it.

Steve :beer:
Thank you Steve! Great minds think alike -- I'm sending Liane out to the thrift stores to find obnoxious noise makers as soon as the holiday frenzy subsides.
Drums and horns. Drums are great for developing coordination, and horns and whistles are great for developing lungs.

Drives:

If you throw out an old speaker at least keep the magnet.:bounce:
Andy, you are absolutely right. It's all about helping them grow up (and torturing their parents).

Vieux is too much of a gentleman to scold us but I couldn't toss a repairable item in his presence.
Bob, congrats on the great grand child. Hopefully his generation will find this forum and see what a legend his great grandpa is.

Hope you had a Merry Christmas and have a happy new year.
Thank you Craig! I'd be happy if his generation looked up from the phone.
Congratulations Bob. Though I think the real Congratulations go to the parents.

Sent from my SM-G930T using Tapatalk
Thank you Andrew! You are so right. Knowing how they did it doesn't bother me at all but I know the feeling isn't mutual. Imagining their grandparents doing it is a tiny bit disturbing to them.
Congrats Bob. A true blessing to you and yours.
Thank you Kirk! The TV reminds us daily how lucky we are to have a healthy baby and mother at the end of the day.
 
Last edited:
OP
B

Bob Heine

ALLIANCE MEMBER
Joined
Oct 24, 2009
Messages
10,709
Location
Boca Raton, Florida
I've never seen a surround replaced. Looking forward to the follow along.
Kirk, I've only seen others do it on Youtube and read some instructions. It involved cleaning, cutting and gluing so I decided to give it a try. As usual, failure is an option but I'm hoping for success.
 
To avoid these ads, REGISTER NOW!
Top Bottom