Bosch switch reassembly

[seagull369]

Trying to re-assemble this switch, which came out of a Bosch R/O sander, and can't figure out where the clip circled in white goes. Any guesses?

 

[KnurledNut]

See if it fits in the farthest bottom/right rectangular hole.
There are two other similar tabs in the holes beside it.

 

[whateg01]

There's nothing in the mating part for it to match up to in that joke so I doubt it. I take pictures as I'm disassembling things with parts. Still miss the item I need to locate though. the other rectangular holes have contacts in them for the wire to push lock into. That extra part is clearly not shaped the same.

 

[seagull369]

There are two other similar tabs in the holes beside it

Like "whateg" mentioned, the ones that look similar are actually different and are the stab-in connections for the wires.

I take pictures as I'm disassembling things with parts.

I usually do that, but the pieces inside all Jack-in-the-boxed out on me as I pried the switch open.

 

[whateg01]

Can't tell, but it almost looks like something used to live at the end of the spring. Maybe inside the spring to keep it from collapsing and maybe act as a stop.

 

[seagull369]

KnurledNut had it right. It goes where I added the yellow box in the pic- jaws facing out. It keeps the two halves of the housing locked together on that corner.

Thanks for all the help!