Canada Only Deals!

[Relax]

Stubby Metric Hex, Torx, and Triple Square sockets are on sale for $24.99:

Stubby Bit Socket Sets

Stubby Bit Socket Sets by Pro.Point. C$36.99. Shop quality products at Princess Auto.

www.princessauto.com

 

[matthew]

Going to put this here as the defacto Canadian purchasing thread. And because most people here know that a good price on a great product is often a better deal than a great price on a lesser product.

I just bought some new steel toe boots. I always bought quality, but wanted to buy Canadian this time. And rather than laced boots, I decided to go with something I could slip on. I’ve liked my cowboy boots over the years. So I’m excited I found some steel toe cowboy boots that fit me well, made here in western Canada. Brahma, made by Canada West Boots. (Other styles of steel toe and non-steel toe also available)

 

[daithi]

Going to put this here as the defacto Canadian purchasing thread. And because most people here know that a good price on a great product is often a better deal than a great price on a lesser product.

I just bought some new steel toe boots. I always bought quality, but wanted to buy Canadian this time. And rather than laced boots, I decided to go with something I could slip on. I’ve liked my cowboy boots over the years. So I’m excited I found some steel toe cowboy boots that fit me well, made here in western Canada. Brahma, made by Canada West Boots. (Other styles of steel toe and non-steel toe also available)

Would be good to hear what you put them through and how they hold up. The styling isn't really for me but I'd like to find a Canadian option some day.

Been using Keens for years and usually I get a solid 12-18 months before they start to deteriorate, after that another 6 months or so before they're trash. But my coworker's redwings were no better and cost double.

 

[matthew]

Would be good to hear what you put them through and how they hold up. The styling isn't really for me but I'd like to find a Canadian option some day.

Been using Keens for years and usually I get a solid 12-18 months before they start to deteriorate, after that another 6 months or so before they're trash. But my coworker's redwings were no better and cost double.

I’ll try to report back after a little use.

I have worn Justin cowboy boots for years. And my work boots have been Red Wing 3507’s for the last couple of pairs. Really like them. Not cheap, but fit my feet, lasted well. I wear them in a plant environment or occasionally on jobsites. I’m only fractional time in the plant - sometimes I’ll wear them all day every day for a stretch, then for a while I’ll put them on as necessary. Hence wanting to try slip-on, even though I’m generally a laces person (even a lot of my Justin boots have been lace-ups).

My work environment isn’t harsh, but as a wearer I’m fairly hard on boots in general. I’ve worn through a lot of soles. I’ve found work boot soles tend to break down at a certain point - not sure if miles or aging of the rubber. I get more time on them than you given my current mixed use. Are you outdoors a lot?

First impression is that the soles are more flexible than the 3507s. Maybe lighter - need to compare next week.

I’ve seen some more vocational Canada West models. I didn’t want the insulation or the look. I’d have liked to also find an option looking like the 3507.

 

[Miss the Pontiacs]

Going to put this here as the defacto Canadian purchasing thread. And because most people here know that a good price on a great product is often a better deal than a great price on a lesser product.

I just bought some new steel toe boots. I always bought quality, but wanted to buy Canadian this time. And rather than laced boots, I decided to go with something I could slip on. I’ve liked my cowboy boots over the years. So I’m excited I found some steel toe cowboy boots that fit me well, made here in western Canada. Brahma, made by Canada West Boots. (Other styles of steel toe and non-steel toe also available)

Excellent choice in boots. I used to buy the same boot when I worked. In fact I did have an old pair at the lake and pulled them on yesterday

 

[Miss the Pontiacs]

Maybe already mentioned but I only found this out yesterday.
Hawkins Cheezies made in Canada.

Here is more info.

Cheezies - Wikipedia

en.wikipedia.org

 

[jptbay]

Would be good to hear what you put them through and how they hold up. The styling isn't really for me but I'd like to find a Canadian option some day.

Been using Keens for years and usually I get a solid 12-18 months before they start to deteriorate, after that another 6 months or so before they're trash. But my coworker's redwings were no better and cost double.

There is Royer and Tatra. I've tried on some Royer, but my fussy feet didn't care for them. Tatra's are great though.

 

[matthew]

one store I had shopped in carried Royer. They said that at least some models were assembled rather than made in Canada. Some local contend is better than none, but I didn’t find any I liked.

Haven’t seen Tatra. Will have to keep an eye out.

 

[ObnoxiousFumes]

Been using Keens for years and usually I get a solid 12-18 months before they start to deteriorate, after that another 6 months or so before they're trash. But my coworker's redwings were no better and cost double.

I love my redwings, the main thing with them is they’re really comfortable. I know guys who’ve had them last 6 years but some boots need restitching/resoling occasionally. That’s to be expected really, but a Canadian option would be cool as well.

 

[PhantomEB]

I run Helly Hansen Xtralights for my job at a fertilizer plant. Let’s just say 13000-20000 steps a day is not uncommon for me. Soles are worn out but until Safety tells me they not safe I will continue to Rock them.

I should replace the insoles soon as well see If the union has any more save 15% off coupons at this time.

 

[matthew]

Most of the regulars here probably don't need it, but if it is of any use to anyone, I noticed CanTire has the 1/2" deep metric impact set on sale for $45 this week. 10mm-24mm with no skips.

I'm still very very happy with mine. I don't think you could find a better set, at least for DIY or farm use.

General PDP Template

www.canadiantire.ca

 

[matthew]

Also, my dad had bought a set of the Powerfist water pump pliers back when they were on sale last. I handled them a bit. Put a piece of round bar in the vise, and gave to a turn with the pliers. Plenty of gription. I'm impressed. I won't say they're 100% as good as Knipex, but they are extremely good, period. And even more so if bought on sale. Good feel, good grip, good fit and finish, good finishing.

Frankly, I bought a pair of Knipex 300mm Cobras to replace a 12" pump plier that I hated. But if I didn't already own those, I don't think I'd have bought them - I'd have bought the Powerfist, given that most of the time that I use the Cobras I'm using the 250mm. I'll be watching for the next sale.

https://www.princessauto.com/en/product/water-pump-pliers/PA1000002481

 

[ObnoxiousFumes]

Most of the regulars here probably don't need it, but if it is of any use to anyone, I noticed CanTire has the 1/2" deep metric impact set on sale for $45 this week. 10mm-24mm with no skips.

I'm still very very happy with mine. I don't think you could find a better set, at least for DIY or farm use.

General PDP Template

www.canadiantire.ca

Those Maximum sockets look as though their size designations will wear off over time like the Stanley’s do, would you know if they’re properly stamped into the bodies as well as printed/etched?
I know the few chrome Maximums I have are wearing off, not sure if the impact sockets are the same.

 

[matthew]

Those Maximum sockets look as though their size designations will wear off over time like the Stanley’s do, would you know if they’re properly stamped into the bodies as well as printed/etched?
I know the few chrome Maximums I have are wearing off, not sure if the impact sockets are the same.

My set has both the etchings and stamped sizes. If/when the etchings wear off, I’ll probably try to fill the stamped numbers with a little paint for contrast. They’re about typical of the font size on older sockets.

Agreed, I also prefer stamped. I have some dual marked sockets, but I won’t buy etched-only.

 

[daithi]

https://www.amazon.ca/dp/B00A8SHULG?ref=cm_sw_r_cso_cp_apan_dp_FHMJSMFRG5KCZW3R6FY4_2&social_share=cm_sw_r_cso_cp_apan_dp_FHMJSMFRG5KCZW3R6FY4_2&tag=redflagdealsc-20

48% off the 7" Pliers Wrench

 

[twagler]

48% off the 7" Pliers Wrench

Thanks for the tip. I never would have spotted this deal otherwise. Purchased one last night, which was lucky since as of this morning it looks like they have sold out already. I've never owned any Knipex tools previously (too much $$$), but for this great deal I was curious to see if they match up to their reputation.

Thanks, Tom

 

[daithi]

Thanks for the tip. I never would have spotted this deal otherwise. Purchased one last night, which was lucky since as of this morning it looks like they have sold out already. I've never owned any Knipex tools previously (too much $$$), but for this great deal I was curious to see if they match up to their reputation.

Thanks, Tom

I have some other knipex tools mostly snap ring pliers and a twin grips. They are the real deal but the cobras and pliers wrenches always felt too spendy. This was cheap enough to try and see what the fuss was about

 

[jmdirk]

Maybe already mentioned but I only found this out yesterday.
Hawkins Cheezies made in Canada.

Here is more info.

Cheezies - Wikipedia

en.wikipedia.org

My favourite extruded corn based snack

 

[hammlm]

I have some other knipex tools mostly snap ring pliers and a twin grips. They are the real deal but the cobras and pliers wrenches always felt too spendy. This was cheap enough to try and see what the fuss was about

I predict you will not be disappointed. Further, I would wager that this is the just the beginning and soon you will understand the fuss and need to try the ones/sizes you don't have.

 

[matthew]

but the cobras and pliers wrenches always felt too spendy. This was cheap enough to try and see what the fuss was about

FWIW, I’d put Cobras and pliers wrench in different categories. Both are excellent, but don’t judge the Cobras based on the pliers wrench.

In my opinion the pliers wrench is sort of a specialty tool. It can be used in a lot of places. But specialty tool in the sense that it shines for certain tasks but other tools can be used there.

Cobras are (a little) less expensive, are more general purpose pump pliers, and are just standouts for being so good at the basics.


And thanks for that tip - I ordered a pair. A nice present for my brother.

 

[Relax]

Wayfair has a $125 cherry picker with free shipping:

https://www.wayfair.ca/storage-organization/pdp/trent-austin-design-2-tonne-folding-engine-hoist-hydraulic-shop-crane-lift-with-6-casters-telescopic-boom-4400-lb-foldable-mobile-cherry-picker-for-garage-workshop-factory-heavy-duty-c119386685.html?piid=1728236082

Also in blue for a little more:

https://www.wayfair.ca/storage-organization/pdp/trent-austin-design-2-tonne-folding-engine-hoist-hydraulic-shop-crane-lift-with-6-casters-telescopic-boom-4400-lb-foldable-mobile-cherry-picker-for-garage-workshop-factory-heavy-duty-c119386685.html

EDIT: unclear if leveler is included with black, but blue specifically states not included.

 

[Two Speed]

Going to put this here as the defacto Canadian purchasing thread. And because most people here know that a good price on a great product is often a better deal than a great price on a lesser product.

I just bought some new steel toe boots. I always bought quality, but wanted to buy Canadian this time. And rather than laced boots, I decided to go with something I could slip on. I’ve liked my cowboy boots over the years. So I’m excited I found some steel toe cowboy boots that fit me well, made here in western Canada. Brahma, made by Canada West Boots. (Other styles of steel toe and non-steel toe also available)

Nice. And what little pricing I could find, it seems to be on par with Ariats, was expecting to see another hundred bucks more for these. At least theres two local places for them.

 

[Relax]

I've gone through a few 2-tier utility carts and still looking for the perfect one to store commonly used tools or tools and parts I'll need for a job instead of going back and forth to the tool chest or laying them in various places on the lift/windshield cowl/floor/driveway. Also a place to leave everything when I'm done because I'm too tired to clean up right away. I saw this cart with 3 drawers at PA for $180 and decided to pick one up. Not on sale, but "Hot Buy":

https://www.princessauto.com/en/30-in-3-drawer-rolling-tool-cart/product/PA0009234519

Before this, I had been eyeing the one with the sliding top, because I can leave stuff on the top and still slide it open/close. It just hasn't come down on sale to a price I can justify.

Love this cart, and don't regret buying it at $180. Just saw that it will be selling for $160 as of tomorrow.

 

[JradM]

Wayfair has a $125 cherry picker with free shipping:

https://www.wayfair.ca/storage-organization/pdp/trent-austin-design-2-tonne-folding-engine-hoist-hydraulic-shop-crane-lift-with-6-casters-telescopic-boom-4400-lb-foldable-mobile-cherry-picker-for-garage-workshop-factory-heavy-duty-c119386685.html?piid=1728236082

Also in blue for a little more:

https://www.wayfair.ca/storage-organization/pdp/trent-austin-design-2-tonne-folding-engine-hoist-hydraulic-shop-crane-lift-with-6-casters-telescopic-boom-4400-lb-foldable-mobile-cherry-picker-for-garage-workshop-factory-heavy-duty-c119386685.html

EDIT: unclear if leveler is included with black, but blue specifically states not included.

Thanks for the tip! I ordered one. I'm a little curious about what shows up. I've never ordered from Wayfair before and the price seems ridiculously good.

 

[Relax]

Thanks for the tip! I ordered one. I'm a little curious about what shows up. I've never ordered from Wayfair before and the price seems ridiculously good.

I wanted to order one too, but have no more room in my garage. I will need to continue using my 4-post lift and dollies in the meantime. Ironically, I never would have been able to unpack and assemble my 4-post without borrowing a friend's cherry picker.

 

[daithi]

I wanted to order one too, but have no more room in my garage. I will need to continue using my 4-post lift and dollies in the meantime. Ironically, I never would have been able to unpack and assemble my 4-post without borrowing a friend's cherry picker.

Just assembled a 2 ton gantry crane at work and there's no way we could have done it without the 5 ton overhead

 

[Relax]

$5 for either a pair, but still a deal for just one:

https://www.amazon.ca/dp/B003NSBG8G

(posted on RFD, so jump on it if you need it)

Dremel EZ541GR EZ Lock Grinding Wheel - Metal​

 

[coldh2o]

Wayfair has a $125 cherry picker with free shipping:

https://www.wayfair.ca/storage-organization/pdp/trent-austin-design-2-tonne-folding-engine-hoist-hydraulic-shop-crane-lift-with-6-casters-telescopic-boom-4400-lb-foldable-mobile-cherry-picker-for-garage-workshop-factory-heavy-duty-c119386685.html?piid=1728236082

Also in blue for a little more:

https://www.wayfair.ca/storage-organization/pdp/trent-austin-design-2-tonne-folding-engine-hoist-hydraulic-shop-crane-lift-with-6-casters-telescopic-boom-4400-lb-foldable-mobile-cherry-picker-for-garage-workshop-factory-heavy-duty-c119386685.html

EDIT: unclear if leveler is included with black, but blue specifically states not included.

Black is down to $119.99, how could I resist? IF the leveler comes too, big bonus.

 

[alwaysFlOoReD]

Black is down to $119.99, how could I resist? IF the leveler comes too, big bonus.

I also ordered a black one. I noticed the 2 one star reviews said wrong item shipped. I guess we'll see...

 

[matthew]

I consider this a must-have item. Osca 1000g machinist hammer. On clearance for $24.03. I know most people are less fussy about hammers than I am, and that's the challenge in selling better hammers, but I really like this hammer. Get one while you can.

https://www.princessauto.com/en/product/36-oz-machinist-hammer/PA0008613770/8613770

 

[JradM]

Couple new Proto items at Princess Auto:



Both in surplus.

 

[JradM]

I noticed Home Hardware carries a bunch of Wera tools - both online and in-store. I'm not mentioning that because of a can't-miss deal, but their prices aren't terrible.

I found it while price-comparing the Wera 6004 self-setting wrench set. That's kind of a niche tool, so I'm not sure anyone else will care, but the set was $213 on Amazon as a "90-day low price" (and other retailers list it for >$300), but $175 at Home Hardware. Plus Home Hardware has free shipping over $99 and $10 off if you sign up for their newsletter. That was enough for me to pull the trigger.



If you're not familiar, it operates on the same principle as a pliers wrench, but it's spring-loaded instead of squeezing the handle and each wrench only covers a limited size.

I have a couple small ones from when Princess Auto used to carry a white label version (must be a decade ago at this point, so don't bother checking) and I can attest that you don't need them - but occasionally they are the perfect tool.

 

[badmatt]

Going to put this here as the defacto Canadian purchasing thread. And because most people here know that a good price on a great product is often a better deal than a great price on a lesser product.

I just bought some new steel toe boots. I always bought quality, but wanted to buy Canadian this time. And rather than laced boots, I decided to go with something I could slip on. I’ve liked my cowboy boots over the years. So I’m excited I found some steel toe cowboy boots that fit me well, made here in western Canada. Brahma, made by Canada West Boots. (Other styles of steel toe and non-steel toe also available)

Made in Winnipeg.

I’ve had a pair of engineers and put them through absolute hell for about 3 years. Insoles started to get chewed up, that’s about it.

 

[alwaysFlOoReD]

Made in Winnipeg.

I’ve had a pair of engineers and put them through absolute hell for about 3 years. Insoles started to get chewed up, that’s about it.

I'm confused. Are you talking about Canada West Boots? If not, then who? Maybe put in a link...

 

[badmatt]

I'm confused. Are you talking about Canada West Boots? If not, then who? Maybe put in a link...

Yes, Canada West Boots.

Canada West Boots | Proudly Made in Canada | 1250 Fife Street, Winnipeg, MB, Canada

Canada West Boots have been manufacturing top quality footwear in Winnipeg, Manitoba since 1978. Each pair is hand crafted to exacting standards.

www.canadawestboots.com

 

[JradM]

I also ordered a black one. I noticed the 2 one star reviews said wrong item shipped. I guess we'll see...

My order arrived. Regretfully, it is not a shop crane.

I did not even open the box. I could tell right away it was much too small to be correct. It says "Engine Support" on the box.

Wayfair's customer support leaves much to be desired... First I tried logging into my account and choosing "Problem with order". That askes a series of questions, but then dead-ends with a broken link to contact customer support.

Then I tried the live chat option - which obviously isn't "live" at all, it's just a chat bot. I went through all the same steps only to have it tell me I could keep the item and it would give me 20% off. Ah, no thanks. When I asked for a refund it said basically: "sorry, I can't do that".

I explained that purchase agreements don't work that way. A company cannot offer a product for sale, accept my money, deliver something different and then require me to accept it. Also, that sort of activity is defined as a "unfair practice" under Alberta's Consumer Protection Act, exposing the company to legal liability beyond a simple civil action.

That's probably unnecessary, but I was getting annoyed. At that point the bot gave me an option to communicated with Customer Service via text.

The first agent again offered me a 20% discount to keep the item, which I declined.

By then it was bedtime, but when I reprised the conversation in the morning I spoke to a new agent - who was actually surprisingly helpful and agreed to a refund and a FedEx pickup.

Assuming you get the wrong item too, perhaps this tale will help you skip to the part where you get to speak to customer service. I think you could probably just ask the bot for that and skip all the nonsense in-between.

 

[alwaysFlOoReD]

My order arrived. Regretfully, it is not a shop crane.

I did not even open the box. I could tell right away it was much too small to be correct. It says "Engine Support" on the box.

Wayfair's customer support leaves much to be desired... First I tried logging into my account and choosing "Problem with order". That askes a series of questions, but then dead-ends with a broken link to contact customer support.

Then I tried the live chat option - which obviously isn't "live" at all, it's just a chat bot. I went through all the same steps only to have it tell me I could keep the item and it would give me 20% off. Ah, no thanks. When I asked for a refund it said basically: "sorry, I can't do that".

I explained that purchase agreements don't work that way. A company cannot offer a product for sale, accept my money, deliver something different and then require me to accept it. Also, that sort of activity is defined as a "unfair practice" under Alberta's Consumer Protection Act, exposing the company to legal liability beyond a simple civil action.

That's probably unnecessary, but I was getting annoyed. At that point the bot gave me an option to communicated with Customer Service via text.

The first agent again offered me a 20% discount to keep the item, which I declined.

By then it was bedtime, but when I reprised the conversation in the morning I spoke to a new agent - who was actually surprisingly helpful and agreed to a refund and a FedEx pickup.

Assuming you get the wrong item too, perhaps this tale will help you skip to the part where you get to speak to customer service. I think you could probably just ask the bot for that and skip all the nonsense in-between.

Mine was delivered today. Same bait and switch.

 

[Relax]

14 oz. MAPP bottle for $11 at Princess Auto (pickup only):

https://www.princessauto.com/en/product/14-1-oz-mapp-gas-cylinder/PA0008899320/8899320

 

[ObnoxiousFumes]

14 oz. MAPP bottle for $11 at Princess Auto (pickup only):

https://www.princessauto.com/en/product/14-1-oz-mapp-gas-cylinder/PA0008899320/8899320

Not sure how that’s possible because MAPP gas was discontinued in 2008 lol.
In my opinion it’s a bit deceitful that they sell MAP-Pro in yellow bottles so people still think it’s MAPP.

Interestingly the item description says MAPP but the bottle in the picture says “Modern Substitute for MAPP”. Devious buggers.

Edit: Even the SDS still says MAPP, this is odd.

 

[Relax]

Not sure how that’s possible because MAPP gas was discontinued in 2008 lol.

I had no idea MAPP was discontinued. I've never used or needed it, even on my rust belt Subaru ball joints. But I keep hearing people referring to MAPP for high heat, so what are they referring to if it's discontinued and not this?