Clearance hammers at Lowes YMMV

[filtered]

As always with Lowe's YMMV. I just picked up 2 hammers at Lowes on clearance.

Stanley 16 oz Smooth Angle Handle Hammer (ball-pein) for $7.49 was $29.98
http://www.lowes.com/pd_91473-355-54-716_0__?productId=1201889&Ntt=91473&pl=1

and

Bostitch 22 oz Milled Straight Handle Hammer (checkered face framer) for $6.24 was $24.98
http://www.lowes.com/pd_327010-355-51-860_0__?Ntt=327010&productId=3199905&rpp=32

$55 bucks worth of hammers for less than $14

They also had some good deals on roofing hatchets, not that I have a use for one.

 

[Ketis]

I bought that ball-pein hammer last night!

Really nice piece, especially for 7.49!

 

[pacsguy]

They had a Vaughn hammer on clearance for 6.24 as well.

 

[signcrafter]

I just came here to post these! Bought a couple vaughns tonight. 25 dollar hammers for 6 bucks! Can't beat a good US made hammer for 6 bucks. They also had stanleys and some kobalt on clearance for 6 bucks. And the roofing hatchet like mentioned.

I also picked up a handful of Nicholson files that were on clearance for about a buck a piece. Most were made in US.

Noticed all the channel locks and knipex pliers were on clearance in the electrical section.

Almost seems like the getting rid of all the good or American made tools.

 

[ATC]

I grabbed a 4lb mini-sledge for $8. There was a 22oz Kobalt framing hammer with the magnetic nail-holder for $8 that I was eyeing. But I try to stay away from woodworking, so I don't have much need for one. I have a Eastwing 24oz if I need it.

There were several more Bosch and Vaughn's on clearance as well.

I also picked up a 36" crowbar for $8...

 

[4v shane]

Can never have enough things that go boom and smash!

 

[In The Doghouse]

I picked up this 20 oz Kobalt framing hammer for $4.74. http://m.lowes.com/pd_145193-16878-60125_0__?productId=1017633 The ball peen and hatchet mentioned in another thread were about $15.00. Not enough discount to make me buy them.

 

[amaes]

Picked up a Vaughn 24 OZ Rubber Mallet for $4.50 today. Such a steal

 

[Bodyshop]

Picked up the 4lb sledge today for $3.99 at my local Lowes. Price was marked at $7 and change. Took it up to CS to check the price and came up $3.99!
Even the lady working customer service was surprised.

 

[turbowoodworker]

I got that same deal on the sledge. I couldn't believe 3+ bucks for the wieght of that thing.

 

[shybuck34]

20 oz. flat angle for 2.49

http://www.lowes.com/ProductDisplay...gId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

 

[csmitty]

Same $4 here. Can't pass that up even it is China.

 

[Ahicksv]

Same $4 here. Can't pass that up even it is China.

What store in atlanta did you buy from?

Thanks

 

[4v shane]

My local store in woodhaven MI was out of all of these hammers. I did pick up two Stanley wrecking bars on clearance. I wish there was a way to find stores online local to me that had these items in stock for the clearance price. To my knowledge certain Lowes stores only will honor the clearance price.


Has anyone else had this issue with trying to score these deals? Did you just show them the online price to get the deal?

 

[csmitty]

What store in atlanta did you buy from?

Thanks

Was Sandy Springs on Roswell Rd. Was the last 4lb'r though.

 

[ATC]

I got screwed on the 4lb. It was $8 and some change at the Lowes I went to. I went to a different one today and it was marked at $3.99 (but an empty shelf). I'm gonna take the receipt back and see if they will price match it...

 

[jeffws]

Picked up the Stanley 16 oz Smooth Angle Handle Hammer for $7.49

Thanks for the heads up

 

[RedFordTruck]

Nabbed a Stanley Fatmax 23 oz framing hammer for $7.99 was $31.98

Made in Taiwan. Very Nice Hammer though.

 

[kf4zht]

Went to the canton ga store today. No mini sledges marked down, but a bunch of other hammers. Also grabbed some of the cheap files. Most are us made, a few sizes that I needed anyway in Brazil. Tempted by the knipex stuff, but the 30 for the mini bolt cutters was too much, even on clearance. Everything rang up to right at 100.

Sent from my SCH-I535 using Tapatalk 2

 

[3oheight]

Got the Stanley ball pein today for 7.49.

 

[ATC]

Went to the canton ga store today. No mini sledges marked down, but a bunch of other hammers. Also grabbed some of the cheap files. Most are us made, a few sizes that I needed anyway in Brazil. Tempted by the knipex stuff, but the 30 for the mini bolt cutters was too much, even on clearance. Everything rang up to right at 100.
http://img.tapatalk.com/d/13/07/07/u8esejyz.jpg

Sent from my SCH-I535 using Tapatalk 2

I hope you didn't pay the $14 for that hatchet. They are on clearance just about everywhere else for $4.74

 

[Muffduster]

There is ONE hammer on clearance at my local Lowes (Rogers, AR). It's a 20oz Bostitch framing hammer marked down from $19.98 to $16.98.

The 1 1/4 pound Kobalt hatchet is $18.98.

 

[irisservice]

My brother picked up 2 of each for me..

 

[ATC]

I randomly stopped by Lowes today and there was another 4lb sledge on the shelf (there wasn't any a few days ago). I snatched it up.

There's a Kobalt framing hammer for $9 and some change...50% off...but still a little high for me to bite. Maybe when it comes down to $3.99...

 

[fred d]

Did a little spending

My cost after discounts
4lb sledge 2@ $3.42 each
3lb drilling hammer $4.17
Propane torch $7.12
Stanley 16oz Ball peen $10.58

 

[fred d]

The screwdrivers

Greenlee 4" #2 Phillips 2@$2.95 each
Greenlee 6" #2 Phillips $2.73
Greenlee 3" #1 Phillips $1.97

 

[RedFordTruck]

After the dust settled I was able to get 3 of these bad boys for $5.62 each plus tax! Clearance price was not marked in store which is why I guess they were still around!

One for me and two for other people.

http://www.lowes.com/pd_327012-355-...l=1&currentURL=?Ntt=bostitch+22+oz&facetInfo=

Made in Taiwan.

 

[fred d]

Will be watching, I got a couple of the estwing hammers when they discontinued them

 

[1973]

Thanks for the heads up picked up the roofing hatchet for 7.49