CM Industrial Large Wrenches are Back!

[victor252]

Here's the link for those 10 large wrenches. Looks like they found another pallet somewhere. Just got a set. Still $60 with PARTS17 discount code.

https://www.searspartsdirect.com/part-number/48989SP/0009/009.html

Happy hunting!

 

[W_E_S]

Already posted in Sears thread.

 

[gungatim]

I just ordered a set but wondering about the SAE sizes, it says large wrench set, the metrics are large, but the SAE--they are 1/4 through 1/2"?? those don't seem very large.

Is the description incorrect on their site?

 

[markhm]

Here is the composition:
23533 1-1/8” FULL POLISH COMBINATION WRENCH INCH
23534 1-1/4” FULL POLISH COMBINATION WRENCH INCH
23535 1-5/16” FULL POLISH COMBINATION WRENCH INCH
23537 1-1/2” FULL POLISH COMBINATION WRENCH INCH
23609 25 MM FULL POLISH COMBINATION WRENCH METRIC
2361 26 MM FULL POLISH COMBINATION WRENCH METRIC
23610 27 MM FULL POLISH COMBINATION WRENCH METRIC
23611 28 MM FULL POLISH COMBINATION WRENCH METRIC
23612 30 MM FULL POLISH COMBINATION WRENCH METRIC
23613 32 MM FULL POLISH COMBINATION WRENCH METRIC

 

[z2w]

They are 1-1/4, 1-5/16, etc.

I ordered a set last night. If you’re ok with getting SYW points instead of a straight discount, code SYW20 brings the price down to $52.

AFAICT there’s no way to avoid the $10 shipping cost. Anyone have a way around that?

 

[bczygan]

Are these USA?

 

[bczygan]

I just ordered a set but wondering about the SAE sizes, it says large wrench set, the metrics are large, but the SAE--they are 1/4 through 1/2"?? those don't seem very large.

Is the description incorrect on their site?

It's incorrect on site. Look at the photo. I let them know.

 

[tjpavlov]

A couple of questions..... Do you have to pay shipping on these? Can you use Shop Your Way Rewards Points? I can't seem to figure that out on their site.

 

[XJPat]

A couple of questions..... Do you have to pay shipping on these? Can you use Shop Your Way Rewards Points? I can't seem to figure that out on their site.

Yes, you have to pay shipping. No, you can not use points.

Sent from my SCH-I545 using Tapatalk

 

[tjpavlov]

Yes, you have to pay shipping. No, you can not use points.

Sent from my SCH-I545 using Tapatalk

Thanks!

 

[Farmall450]

Customer service just told me my original order from last Tuesday is still on backorder and that they're mistakenly on their website. Best of luck.

 

[SuperXero]

I put in a quantity of 99 just to test if it would let me check out with it and it did. So I doubt the sears stock information is correct if they even have any at all.

 

[Scout3918]

Are these USA?

yes they are USA.

 

[Scout3918]

They are 1-1/4, 1-5/16, etc.

I ordered a set last night. If you’re ok with getting SYW points instead of a straight discount, code SYW20 brings the price down to $52.

AFAICT there’s no way to avoid the $10 shipping cost. Anyone have a way around that?

what's SYW points?

 

[Hexen]

what's SYW points?

www.shopyourway.com

Points you can spend at Sears/Kmart.

 

[z2w]

Customer service just told me my original order from last Tuesday is still on backorder and that they're mistakenly on their website. Best of luck.

Superdarn!

 

[bczygan]

Could someone who has these wrenches tell me how long the 1 1/2" one is?

Bill

 

[btoonsis]

Could someone who has these wrenches tell me how long the 1 1/2" one is?

Bill

19"... I'll post a pic of it next to a ruler... if I can figure out how to upload!

 

[lotus_guy01]

My order from a couple of weeks ago still hasn't shipped. Good luck, but I'd question the current stock. Of course as bad as Sears is these days anything is possible.

 

[bczygan]

19"... I'll post a pic of it next to a ruler... if I can figure out how to upload!

Thank You!

 

[bczygan]

Ordered a set to complement my HF ones.

Bill

 

[victor252]

Ordered a set to complement my HF ones.

Bill

I think you mean "replace" the HF ones.

Let's see if they ship. If the website is wrong, then they haven't corrected it as of now.

 

[thesilverone]

ordered...hopefully

 

[olytdi]

Thanks OP -- very good deal. Will complete one of the only glaring holes in my tool set...

 

[Farmall450]

So today the word is they'll ship by 12/20...I won't be holding my breath.

 

[victor252]

So today the word is they'll ship by 12/20...I won't be holding my breath.

Thanks for keeping us updated.

The site still says "In Stock" and doesn't say "Limited Quantities" like the other wrench sets so I'm cautiously optimistic. But like you said, no point in holding my breath. Maybe I'll call in tomorrow.

 

[CJM8515]

not usually a sears and cman guy, but these are the awful raised panel wrenches and I recall these are made by SK? worth it, Ive been eyeing up the singles for sale at home depot and at 10/ea they would cost more than this set

 

[Farmall450]

not usually a sears and cman guy, but these are the awful raised panel wrenches and I recall these are made by SK? worth it, Ive been eyeing up the singles for sale at home depot and at 10/ea they would cost more than this set

No, SK made the older Professionals. These are Armstrong long panel
However, note that most people that ordered haven't gotten any...so don't hold your breath.

 

[CJM8515]

No, SK made the older Professionals. These are Armstrong long panel

However, note that most people that ordered haven't gotten any...so don't hold your breath.

Well. That ***** if I don’t get them. It said delivery by January 3

Good to know they are Armstrong tho

 

[Fedwrench]

I wouldn't say that most that ordered didn't get them. There were some lost shipments, lost half during shipment, but, many who ordered the first go round like me, got them without any issues.
I don't have a clue as to Why These are being sold by Sears Parts Direct instead of normal Sears online sales
They are definitely Armstrong made wrenches. The ones I got were made in October 2014 according to parts list sheet in the box.
Be patient, stay positive, and perhaps a heavy cardboard box with two bags of wrenches inside will show up on your front porch.

 

[Scout3918]

I wouldn't say that most that ordered didn't get them. There were some lost shipments, lost half during shipment, but, many who ordered the first go round like me, got them without any issues.
I don't have a clue as to Why These are being sold by Sears Parts Direct instead of normal Sears online sales
They are definitely Armstrong made wrenches. The ones I got were made in October 2014 according to parts list sheet in the box.
Be patient, stay positive, and perhaps a heavy cardboard box with two bags of wrenches inside will show up on your front porch.

I also got mine with no issues. hopefully others will get theirs soon.

I hope get my metric cross force this week. it shows they shipped last week..

 

[Farmall450]

I wouldn't say that most that ordered didn't get them. There were some lost shipments, lost half during shipment, but, many who ordered the first go round like me, got them without any issues.
I don't have a clue as to Why These are being sold by Sears Parts Direct instead of normal Sears online sales
They are definitely Armstrong made wrenches. The ones I got were made in October 2014 according to parts list sheet in the box.
Be patient, stay positive, and perhaps a heavy cardboard box with two bags of wrenches inside will show up on your front porch.

Ordered both the first round and this round in hopes of getting a set...let's just say I haven't.

I don't think it's accurate to post likeliness off of the first few people - obviously at some point they had some in stock, which those people received.

 

[bluebolt]

I got my set a couple of weeks back! Ordered and got the smaller set too.

 

[markhm]

Ordered a set of the large wrenches on Sunday. Today I found the $20 worth of points posted to my account and it shows "sent to supplier for processing" as a status. Says it will ship in 1-2 day.

These are being sold thru SPD so that they don't have to give us free shipping and so that we cannot pay some or all the price with SYW points and FreeCash.

 

[CJM8515]

I got a confirmation email I placed an order, checked it now and it says processing.

 

[njc41980]

I'm in.

Gave it a try, and I guess if it's not real I'll have my money back. $70 for a quality set of large wrenches that I need is too good to pass up the risk.

 

[doctordirt]

Just ordered another set. Really love the first set. As others have said this forum cost me a lot of money. But, I love it.

 

[njc41980]

Does someone have a link to the smaller ones?

Are they still in play?

 

[Scout3918]

I got a email showing my Craftsman Industrial Cross Force shipped yesterday.

cant wait check them out. I really like the large set SAE and Metric wrenches I got.

 

[lotus_guy01]

Ordered both the first round and this round in hopes of getting a set...let's just say I haven't.

I also ordered two sets, one in each round. Both orders still show sent to manufacturer. I'm not holding out much hope at this point, since my first order is a couple of weeks old now.