Compressor motor wiring help

[Bellaireroad]

Is it correct that the two hots are L1 and L2, and the ground is going to be the "join" thanks

 

[Bellaireroad]

ttt for help

 

[warren57]

First what voltage is the motor? For 220 or higher, L1 and L2 are power leads.
For 120v, L1 is power, L2 is neutral.
With either, ground is the green screw on the housing.
The "join" leads are part of the motor direction set up. You wire nut them together, but DON'T ground them!!!!



Sent from my iPhone using Tapatalk

 

[Bellaireroad]

First what voltage is the motor? For 220 or higher, L1 and L2 are power leads.
For 120v, L1 is power, L2 is neutral.
With either, ground is the green screw on the housing.
The "join" leads are part of the motor direction set up. You wire nut them together, but DON'T ground them!!!!



Sent from my iPhone using Tapatalk

Warren , thanks for that