wagner lockheed fe-20936 Could use help finding brake rebuild part listed, the master is in a 58 plymouth savoy, i was about to find rebuilds kits for it but the kit bore is larger than the master ive got, a google search showed an old ebay auction said ford master. I also need the boot that bolts to back side to help hold the cyclinder in, any help would be great thks.
Could use help finding brake rebuild part
- Thread starter mad57
- Start date
If you need the master cylinder rebuilt or sleeved check out White Post Restorations.
http://www.whitepost.com
I am getting a weird error on the web site. Its been 22+ years since I had a master done here but I think they are still around.
Kevin
http://www.whitepost.com
I am getting a weird error on the web site. Its been 22+ years since I had a master done here but I think they are still around.
Kevin
Looked on line and found this master base plate looks the same as well as retainer behind master, but when i run if it will work on my 58 plymouth savoy it says no!
http://www.ebay.com/itm/WAGNER-MC36...Parts_Accessories&vxp=mtr&hash=item27bf268f42
http://www.ebay.com/itm/WAGNER-MC36...Parts_Accessories&vxp=mtr&hash=item27bf268f42
wowLooks like Antique Auto Supply now has a website and is on ebay.
Great video by the way
http://www.antiqueautosupply.com/
ebay user: antiqueautosupply
Great video by the way
http://www.antiqueautosupply.com/
ebay user: antiqueautosupply
airsanford
Well-known member
There are some old MoPaR specialists out there, I've been seeing these guys ads since the '80s so they must be doing something right...
http://www.oldmoparts.com/Default.htm
http://www.robertsmotorparts.com/index.html
http://www.oldmoparts.com/Default.htm
http://www.robertsmotorparts.com/index.html
Maybe try http://www.rareparts.com/ we used to get a lot of tough to find ford stuff from them.
An older thread this guy is talking about them.
http://forums.aaca.org/f119/wagner-lockheed-brake-parts-chrysler-259904.html
http://forums.aaca.org/f119/wagner-lockheed-brake-parts-chrysler-259904.html
chris142
Well-known member
Problem seems to be that the master i have is not original to the car, i have bought rebuilds and when i got them realized that they were not matching my master, so i gathered that 2 diffrent companys didnt mess up, for close to 100 bucks i can buy an original one used off egay, but really thought that given this one i have has a part # i would be able to rebuild it. I will try calling the places mentioned above again thks.mad57.
That casting number crosses to 5 master cylinders from mid 60's Chryslers. I'm assuming its a manual cylinder. A Wagner # for the kit is F106472. 1" bore.
CARQUEST # is m1246
NAPA # is 256
Raybestos is mk256
I show the boot in my kit (CARQUEST) but not the plate that bolts to the back of the cylinder.
Hope this helps.
CARQUEST # is m1246
NAPA # is 256
Raybestos is mk256
I show the boot in my kit (CARQUEST) but not the plate that bolts to the back of the cylinder.
Hope this helps.
Thanks ill start with those too, thanks again.