Craftsman Hydraulic Stool

[cagullett1]

These stools go on sale every once in a while for $49.99. I haven't seen them this price for a few months so I figured I would let people know if they are needing another stool.

http://www.sears.com/shc/s/p_10153_12605_00961828000P

Can't use points or coupon codes because it is a hot deal, but you won't get them any cheaper.

 

[stage20]

Saw a thread tsc has a very similar stool for 29 under the traveler brand

 

[NUTTSGT]

Saw a thread tsc has a very similar stool for 29 under the traveler brand

Yeah, it figures after I buy two TSC stools, put them together and start a thread about them, that Sears would put their stools on sale.

 

[Hafen_Kafer]

I picked one up. Thanks op

 

[softailgarage]

Got my **** parked in one right now, could use a second, thanks.

 

[Ahicksv]

These stools go on sale every once in a while for $49.99. I haven't seen them this price for a few months so I figured I would let people know if they are needing another stool.

http://www.sears.com/shc/s/p_10153_12605_00961828000P

Can't use points or coupon codes because it is a hot deal, but you won't get them any cheaper.

Link shows 49.99. Was it cheaper earlier?

 

[cagullett1]

Link shows 49.99. Was it cheaper earlier?

No, $49.99 is the lowest price. You can get the TSC stool pretty cheap, but I haven't heard how well they last. This Craftsman stool overall has pretty good reviews on their website and GJ. I haven't found many stools with a back for less than $50 at any competitors, even on black friday.

 

[Ch3apsk8]

Link shows 49.99. Was it cheaper earlier?

There was a two for $70 deal earlier this year, but that was for every color except this black one.

 

[Ign]

Yeah, it figures after I buy two TSC stools, put them together and start a thread about them, that Sears would put their stools on sale.

Yeah but Sears *****. I think I read something about that somewhere here....

 

[NUTTSGT]

No, $49.99 is the lowest price. You can get the TSC stool pretty cheap, but I haven't heard how well they last. This Craftsman stool overall has pretty good reviews on their website and GJ. I haven't found many stools with a back for less than $50 at any competitors, even on black friday.

Comparing the two, Cman and TSC (Traveller), side by side, I believe they are made in the same factory. Just a few minor details separate them. I honestly believe, since I have both now, they will just as long as the other.

 

[Hafen_Kafer]

 

[cagullett1]

I have to overlook the stool and admire your Kennedy boxes. My dad is a retired machinist and has a handful of old brown Kennedy tool boxes. They are so nice!

 

[rice rocket]

I was looking at the giant CNC machine myself.

 

[Hafen_Kafer]

I have to overlook the stool and admire your Kennedy boxes. My dad is a retired machinist and has a handful of old brown Kennedy tool boxes. They are so nice!

I was looking at the giant CNC machine myself.

Thanks, my Kennedy is my pride and joy at work. Here are more pics of the box, the machine, and some of the impellers we cut.
It's the newest toy at work. DMG/Mori Seiki 5 Axis CNC

http://distilleryimage7.s3.amazonaws.com/9394291c8ec411e3906b126db9546433_8.jpg

http://dhkvw.smugmug.com/Other/TK-Phone-Pics/i-kGnN5CX/0/X2/CAM00270_1-X2.jpg

http://dhkvw.smugmug.com/Other/TK-Phone-Pics/i-H8PDpbq/0/X2/DSC00359_1-X2.jpg

http://dhkvw.smugmug.com/Other/TK-Phone-Pics/i-BrW7jZz/0/X2/20140410_135014-X2.jpg

 

[mustangsean]

Thanks for this! Cant beat it with $10 in surprise points and free pickup in stock

 

[DSM21]

If I had a workbench (Which I don't) I would be all over this, but I did pick up the black Craftsman mechanic seat tonight

 

[cagullett1]

If I had a workbench (Which I don't) I would be all over this, but I did pick up the black Craftsman mechanic seat tonight

Was it on sale?

 

[pipsters]

These aren't that great. I had one. Bought it on Black Friday 2013 for $39.99. Got it home and assembled it after Xmas, and sold it on Craigslist for $40. I wouldn't get one IMO, not worth it. Cheaply made. Looks nice but that is about it. I've average, 5'9", 180#.

 

[cagullett1]

These aren't that great. I had one. Bought it on Black Friday 2013 for $39.99. Got it home and assembled it after Xmas, and sold it on Craigslist for $40. I wouldn't get one IMO, not worth it. Cheaply made. Looks nice but that is about it. I've average, 5'9", 180#.

Do you have another stool suggestion?

 

[DSM21]

Was it on sale?

it was about $8, but I snagged it because I had to return a previous order which added up to about $50 and then had $20 in surprise points that were about to expire. Not really a deal, but I had to use some surprise points, so I opted for this. So I had to grab it. :thumb up:

I am going to assemble it later tonight.

 

[pipsters]

Do you have another stool suggestion?

I wish I did. I have been unable to find what I'm looking for in decent quality. Most are mail order only unfortunately.

The Craftsman stool was close but missed the mark, the seat was too small, the back was too short, the foot rest was not positioned well, etc. It might work for others but I am willing to spend more to find a comfortable stool.

 

[Papas63]

Had to go pick up a few last night after looking at Hafen Kafer's picture. I had $50 gift card and credit on another. Pretty much got both for less than the sale price. Hard to beat that deal.

 

[nickjj]

$49.99, $89 shipping and $40 tax...

Look good by the bench though

 

[Mach5]

Says $99.99 when I click on the link. Does that mean the sale price is over?

 

[nickjj]

Says $99.99 when I click on the link. Does that mean the sale price is over?

I would say so.

Seems to be $99 pretend real price, $71 everyday price, $49 sale price, $39 really good sale price.

 

[Dustimizer]

I have had this stool for a few years. I have had to repair it a couple times. So today I decided to play around with an old desk chair and it worked out very well. The shafts were the same diameter so this was a 5 minute swap.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[stage20]

looks extremely top heavy. i like the idea!

 

[stage20]

40 bucks off retail!
i should bite? LOL.
http://pensacola.craigslist.org/tls/4446130034.html

 

[rice rocket]

You should show up, and say "this is used, I see **** marks", call him a liar, and then lowball him.

 

[stage20]

You should show up, and say "this is used, I see **** marks", call him a liar, and then lowball him.

ill just wait till it goes on sale for 49 again and then try and deal.

 

[upgrading]

The black one is back on sale at $44.99 for Craftsman Club members.
http://www.craftsman.com/craftsman-...p-00961828000P?prdNo=1&blockNo=1&blockType=G1

 

[Requin6]

Got this as a Christmas present a few years back. In my opinion its well made and sturdy. Nice deal!

 

[bigboost]

Coupon friendly too, added an extension to get it up to $50 , $10 off $50 coupon works.

Plus when I complained about my Tool of the month points they sent me $10, got the Oops email with $10 more dollars.

$20 for this stool? I'm pretty happy.

 

[loranger]

Thanks! Just got another for my reloading bench for $23 after coupons/points!

 

[ybnormal70]

I wonder if you could convert the seat/back onto a rolling stool? Looks like the cylinder and seat are the same.....makes me wonder.....

Kevin

 

[catsass]

62.99, Concord, NC

Sent from my GT-P5113 using Tapatalk

 

[GCncsuHD]

62.99, Concord, NC

Sent from my GT-P5113 using Tapatalk

$62.99 is the regular price, if you are a Craftsman Club member the price is $44.99, also looking at the Concord, NC store.

 

[graffix000]

It is showing up at 69.96 through craftsmans club for me.
Anyone else see the deal or am I too late again. I am logged in, but not seeing the extra discount.

 

[GCncsuHD]

It is showing up at 69.96 through craftsmans club for me.
Anyone else see the deal or am I too late again. I am logged in, but not seeing the extra discount.

Deal is gone.

 

[upgrading]

Deal is gone.

Deal is back !

The black one is back on sale at $44.99 for Craftsman Club members.
http://www.craftsman.com/craftsman-...p-00961828000P?prdNo=1&blockNo=1&blockType=G1