craftsman modules on sale again

[idculbertson]

for those who missed it last time 1/2 3/8 and 1/4 modules 1/2 off

http://www.sears.com/search=module?...t=true&viewItems=25&redirectType=CAT_REC_PRED

 

[les_garten]

for those who missed it last time 1/2 3/8 and 1/4 modules 1/2 off

http://www.sears.com/search=module?...t=true&viewItems=25&redirectType=CAT_REC_PRED

What's a module?

And your link is a non-starter...

 

[03protege]

What's a module?

And your link is a non-starter...

What is a non-starter?

If you want to know what a module is click the link, the 1/4" 3/8" and 1/2" are all priced at 50% off.

 

[les_garten]

What is a non-starter?

If you want to know what a module is click the link, the 1/4" 3/8" and 1/2" are all priced at 50% off.

Typical Sears, link didn't work first few times I clicked on it.

 

[pendragon1998]

Are the ratchets made in Taiwan and the sockets/extensions made in usa?

 

[aarkie]

Ordered 1/4", 3/8" and 1/2" last time around and all pieces are USA even the thin profile ratchets. Very nice quality on the plating too in comparison to the all-in-one sets they run on sale all the time plus no hex key fillers.

 

[CustomCareDetailing]

Any coupon codes stack with this?

 

[idculbertson]

coupon code VALPAK5 works, 5 off $50. If ordering more than one make seperate orders to maximize on savings

 

[idculbertson]

Wish the impacts would go 1/2

 

[lithdoc]

Wish the impacts would go 1/2

Yep... Still drooling over the missed professional use set.

 

[Fastbird]

When I bought these in December EVERYTHING was USA made to include the ratchets.

 

[RCL]

Purchased the 1/4" and 3/8" sets when they were on sale late last year and everything was USA made.
Nice sets for the money.

 

[Subyroo651]

Pretty sure that Sears said that box sets or at least these module sets are going to remain entirely USA for awhile.

 

[Super Sport]

Back a few months when these went on sale cheaper I did run across an imported impact set. All of the others I saw were 100% USA.

 

[Ah4449]

I may have to jump on the 1/4"... I wish the 1/2" were 6 pt. sockets though. Thanks OP!!

 

[03protege]

Are the ratchets made in Taiwan and the sockets/extensions made in usa?

When I bought mine last month ago it had a USA ratchet, I believe the sets are continuing to use the USA ratchets.

 

[idculbertson]

Yep... Still drooling over the missed professional use set.

I keep checking the moduals everyday hoping....

 

[Requin6]

I too ordered the 1/4, 3/8 and 1/2 drive modules last year at the same price. Can't really beat $200 for a nearly full set of USA made deep and standard sockets with ratchets and extensions included. Great deal in my book.

Just wishing the impact module would be as deeply discounted as well. I seem to be checking on them everyday!

 

[MPOWERD]

Do these have the new 1 year only warranty on replacement or the full replacement lifetime warranty?

 

[Chris_PT]

Has anyone bought the bit socket module? All made in USA?

I need something like that, but I also have my eye on the SK sets that are BOGO, but they are definitely more expensive.

 

[Brownsfan]

All bit socket sets at my local sears were USA. Who knows what you will get sent if you order it online

 

[rycam]

Back on sale again. Valpak5 worked on separate orders for each set form me.

 

[idculbertson]

For those wondering I just bought a set last sale (2 weeks ago) and the ratchets were the USA ones.

 

[bisley45]

Yep I just bought the 309 PC mechanic set and all was marked USA but the wrenches were not. They were the ratchet wrenches. On sale for 199

Sent from my DROIDX using Tapatalk 2

 

[Texican]

These are nice sets for the money. Too bad the 1/4" set I ordered came with a broken ratchet that looked like it had been dragged behind the UPS truck plus the 3/8" module took over two months to ship.

 

[5.0vert]

try this code SEARSTOOLS it has been taking off

$100 and over = $15
$200 and over = $35
$300 and over = $60

It is hit or miss as usual with SEARS! Not good for storage purchases.

 

[CustomCareDetailing]

all three together come up to 199.97. Anyone know of anything super cheap or any other good small deals to add in to get it over $200. The searstools promo code works for me and would be better than three different orders using valpak5

 

[tube_guy]

Sometimes I use these utility knife blades as a filler item. They're a pretty decent deal.

http://www.sears.com/allway-3-notch...p-00994860000P?prdNo=1&blockNo=1&blockType=G1

 

[FXDawg]

I just got in on all 3 with tax 181.05 with those utility blades, thanks Tube_guy. Plus, I went in through shopDiscover and got anther 5% cash back! That should give me another $9.00 back!

Thanks OP...thanks a lot! I SO didn't "need" these! LMAO

OH...and they're ready for pickup already!

 

[pendragon1998]

I didn't have a sears near me that had these available for pickup, but Kmart.com has the same price on the modules and you can get them shipped from kmart.

I also got $10 in points for spending $50. I had to go into the SYWR site, log in, and add the coupon to my account (before going to kmart.com and adding the item to my cart), then it automatically came up in my shopping cart. YMMV.

KMART.COM LINKS

1/2" Module

3/8" Module

1/4" Module <-- Showing 'temporarily unavailable' now

 

[MN4x4]

All three of my modules (one of each) finally were ready for pickup so I dropped by today after work.

1/4" Module - Made in USA!!!!

3/8" Module - Made in USA!!!!

1/2" Module - NOT Made in USA :-(

Guess I'll call around tomorrow and see if any other stores have the 1/2" Module Made in USA and in stock so I can exchange these...

 

[pendragon1998]

What parts of the 1/2" module are not made in USA?

 

[FXDawg]

I didn't have a sears near me that had these available for pickup, but Kmart.com has the same price on the modules and you can get them shipped from kmart.

I also got $10 in points for spending $50. I had to go into the SYWR site, log in, and add the coupon to my account (before going to kmart.com and adding the item to my cart), then it automatically came up in my shopping cart. YMMV.

KMART.COM LINKS

1/2" Module

3/8" Module

1/4" Module <-- Showing 'temporarily unavailable' now

I got that too but then added to cart again and it went. Actually I was screwing around and I ended up adding it like 4 times because, at first it said "temporarily out of stock" then, I hit again and it went....then, I remembered the the whole discover 5% thing and went in that way and did it again and it said "out of stock" again so, I added to cart again and it went. Must be some strange thing with that SKU... try it again

 

[BTC]

Is there any difference between these socket sets and what you would get in one of their 154, 200 or 300 piece combination sets? Know what I'm talking about?

This forum is a great way to find deals on stuff you probably don't need.

 

[Car_Guy]

This forum is a great way to find deals on stuff you probably didn't know you needed.

I fixed the quote for you.

 

[Chadwilliam1]

do these come with 6 or 12 point sockets?

 

[FXDawg]

it seems the 1/2" are 12 pt and the 3/8" & 1/4" are 6 pt

 

[BTC]

I fixed the quote for you.

True. In addition to finding deals on stuff I didn't know I needed, I'm finding that I can hardly afford all of these deals, and I haven't even pulled the trigger on this one.

 

[BTC]

Will 12 points work on a six point bolt? Six points will not work on 12 points, correct?

 

[FXDawg]

12 pt sockets will, indeed, work on 6 pt bolt heads. Not sure I've ever seen a 12 pt bolt head though.