Craftsman Professional Wrenches

[lineman88]

Just got the 10 SEA and 10 Metric full polish stubby made USA delivered - sweet price of $69.99

 

[usmc_noma]

Mine will hopefully come in today.

 

[gsea]

Thought the stubby's were back in stock... nope.

 

[usmc_noma]

Finally got the stubbies in and man they're nice and shiny. I did find one issue on one of my metrics. Quality control must have been on break, but this is big in my book. There's a ridge going all the way around the inside of the open end and it seems one side of the claw got pressed before plating. I just hope I can find a replacement for this. In store selection is becoming slim.

 

[EdJack]

Finally got the stubbies in and man they're nice and shiny. I did find one issue on one of my metrics. Quality control must have been on break, but this is big in my book. There's a ridge going all the way around the inside of the open end and it seems one side of the claw got pressed before plating. I just hope I can find a replacement for this. In store selection is becoming slim.

Call the number on the Parts List enclosed.

1-800-832-7494, Monday-Friday, 8:00am to 4:30pm Eastern. They will send you a free replacement for that single item in the mail.

 

[EdJack]

Killer Stubbies!

Mine just arrived. Made in the USA.

 

[usmc_noma]

Call the number on the Parts List enclosed.

1-800-832-7494, Monday-Friday, 8:00am to 4:30pm Eastern. They will send you a free replacement for that single item in the mail.

Thanks! I didn't even think of that.

 

[Shrewd1]

Received my U.S.A set today!

 

[WilltheEngineer]

Can anyone confirm that the Cman Pro sets are China..or USA? A review stated China..little confusing..

http://www.sears.com/craftsman-prof...p-00945964000P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/craftsman-prof...p-00945963000P?prdNo=3&blockNo=3&blockType=G3

 

[cagullett1]

Can anyone confirm that the Cman Pro sets are China..or USA? A review stated China..little confusing..

http://www.sears.com/craftsman-prof...p-00945964000P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/craftsman-prof...p-00945963000P?prdNo=3&blockNo=3&blockType=G3

You would be hard pressed to find these sets in USA. I bought the 9pc sets and then bought all the individuals from the store (individuals are USA). Then returned the Chinese individuals with my "individuals" receipt. Same item number stamped on the wrench. If they sell them for the same price and attempt to tell me they are the same, then I see no problem returning them as the same item. Or you can just buy each of them individually and not deal with the exchanging. 10mm-18mm is about $85 (with $15 off) and 1/4"-3/4" is $60 (with $15 off). I paid $75 total for both 9pc sets on ebay.

 

[EdJack]

Can anyone confirm that the Cman Pro sets are China..or USA? A review stated China..little confusing..

http://www.sears.com/craftsman-prof...p-00945964000P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/craftsman-prof...p-00945963000P?prdNo=3&blockNo=3&blockType=G3

China.

All the new sets for the last couple years are China.

The only way to get USA is new old stock, individual open stock pieces, or Craftsman Industrial.

That's why the USA Stubbies deal in the original link was a killer deal.

 

[cagullett1]

I definitely should not have hesitated on buying the stubby set. I questioned, "when am I ever going to use those?".... Now I wish I would have bought them for the heck of it.... eventually I will find a use

 

[usmc_noma]

Call the number on the Parts List enclosed.

1-800-832-7494, Monday-Friday, 8:00am to 4:30pm Eastern. They will send you a free replacement for that single item in the mail.

Called them up and, with no hesitation, they're going to send a replacement out. It should be here in 7-14 days.

 

[lrhredjb]

No sets, but a lot of individual items at some great prices.
http://www.sears.com/shc/s/tools-awesome-deals/dap-120000000333322

 

[leadfoot415]

I ordered the 20pc stubby set and got it late last week.. nice quality!

 

[kooldude1992]

The 20 piece stubby set is back in stock. I was able to successfully check out and am waiting for a shipping comfirmation. I also threw this in there:

http://www.sears.com/craftsman-22mm...p-00940156000P?prdNo=1&blockNo=1&blockType=G1

 

[crzipilot]

OOS stock already......

 

[EdJack]

The 20 piece stubby set is back in stock. I was able to successfully check out and am waiting for a shipping comfirmation. I also threw this in there:

http://www.sears.com/craftsman-22mm...p-00940156000P?prdNo=1&blockNo=1&blockType=G1

Thanks. I ordered the 22mm stubby to fill out my 20 piece set. I also ordered the open stock 1 inch Industrial for $2.97 when it was on sale last year. That also helps fill out the set. Keep an eye out for the 1 inch, it goes on sale a couple times a year for $2.97.

Here's the link for the 1 inch Industrial Stubby, that comes up for sale a couple times a year: http://www.sears.com/search=Craftsman%20Professional%20Use%20Inch%20Full%20Polish%2012PT%20Stubby%20Combination%20Wrench%20Open%20Stock?catalogId=12605&autoRedirect=false&storeId=10153&yikes_prod=43563446

 

[crzipilot]

Strange, they seem to be back in stock. BUT we will see. I happened to check if they would load into cart and allow checkout on a different computer. It didn't say OOS. So I went down to other computer where my cart was populated, and I got the OOS message again. I cleared the cart out, signed back in and viola.....it allowed me to place the purchase.

So maybe try that for a few of you trying to get these and it showing out of stock.

 

[rice rocket]

Is there a SYWR point promotion? Along w/ the SYWR points coupon, I got $20 worth of points on this item.

Oh yeah, they're back in stock.

 

[cagullett1]

Is there a SYWR point promotion? Along w/ the SYWR points coupon, I got $20 worth of points on this item.

Oh yeah, they're back in stock.

That's weird... because it won't even allow me to use one of the $10 points for $50 purchase for some reason. I have $75 worth of sockets and wrenches in my cart and the only thing I can use is Save15

 

[icecactus]

Is there a SYWR point promotion? Along w/ the SYWR points coupon, I got $20 worth of points on this item.

Oh yeah, they're back in stock.

It was showing OOS for me. SO i logged out and searched for the part number and it came up as in stock.

I also got the $20 of points as well. I had to go into my sywr account and load the coupon then apply it. Thanks for posting it cause I would not have gotten it without your tip!

I ended up getting it for $99 - $15 - $15 coupon - $10 in points from previous deal
= $59 + $20 in sywr points! = $39

 

[cagullett1]

The Professional 25mm is back on the website. I haven't seen it on there in a few months.

http://www.sears.com/shc/s/p_10153_12605_00945959000P

 

[rice rocket]

That's weird... because it won't even allow me to use one of the $10 points for $50 purchase for some reason. I have $75 worth of sockets and wrenches in my cart and the only thing I can use is Save15

There's stipulations on what you can use some coupons on. Like no hot buys, clearance, etc.

 

[cagullett1]

Got it.... that makes since considering my cart was full of Industrial sockets and wrenches.

 

[cagullett1]

Heads up, Sears has some deals online today for single's Craftsman wrenches. I picked up a couple stubby's I was missing, an offset, and a couple combo wrenches I was missing.

 

[Harrison2]

10-23mm metric offsets.

$113, reduced to $76.

discount codes bring it $51.

SYWR points and a giftcard for sears incompetence...

total $22.

 

[EdJack]

Thanks for the heads up on the open stock pieces!

I bought the 10x11 and 21x23 Craftsman Industrial Full Polish Deep Offsets for about $9 for both a few weeks ago when the Industrials first went live.

I liked them so much, I've been looking at the Made in the USA open stock pieces at the local store, but didn't want to spend the money on the full retail store prices, and didn't want China sets.

Just ordered the 12x14, 13x15, 16x18, 17x19, and 20x22 Craftsman Professional Full Polish open stock pieces to complete the set with the two 10x11 and 21x23 Industrials.

Had to throw in a 39 cent Carpenters Pencil to bring the order up over 50 bucks.

$50.12 total. Used a $5 off $50 coupon code. Had $10 surprise points off $50. $2 points from clicking Sears/Kmart ad. Another $1.25 leftover points.

Brought it down to about $36 out the door. Plus, another coupon code for $11 points for future purchase. Effectively bringing it to about 25 bucks!

25 bucks for the Professionals, plus 9 bucks for the Industrials, gives me sizes:

10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 mm.

So, effectively about $36 for a Full Polish Made in the USA Metric Deep Offset Wrench Set!

I'm almost certain these will be Made in the USA singles. If not, no worries, I take them back to Sears and return them.

 

[macgee]

10-23mm metric offsets.

$113, reduced to $76.

discount codes bring it $51.

SYWR points and a giftcard for sears incompetence...

total $22.

Hi Harrison,

I went on sears site tonight and looks like most are no longer available unless I'm looking in the wrong spot. I need larger combo metric's 19mm+

Also, do you know where I can find discount codes?

Thanks

 

[bluesurf]

10-23mm metric offsets.

$113, reduced to $76.

discount codes bring it $51.

SYWR points and a giftcard for sears incompetence...

total $22.

I lol'd at this...do you think he has any metal tools?

 

[cagullett1]

Hi Harrison,

I went on sears site tonight and looks like most are no longer available unless I'm looking in the wrong spot. I need larger combo metric's 19mm+

Also, do you know where I can find discount codes?

Thanks

Search "Craftsman professional metric wrenches"
19mm - $9.49
21mm - $16.99

Code:Save15 will save you $15 on tools (exclusions apply) if you spend $75 or more. Use codes in your SYWR account to get/use points

 

[EdJack]

SEARS5OFF50 - $5 off $50, if you don't want to spend $75 for the SAVE15 - $15 off $75.

In SYWR, I had two additional coupons. One for $10 in instant points for $50 spent (that I used right away on this purchase). A second for $10 bonus points on a future purchase (that's already in my account).

The good thing about these open stock pieces is they are a great discount, plus they aren't branded as a "Hot Buy". Once Sears brands them as a Hot Buy, then most coupons are blocked. These pieces allow for all kinds of coupon stacking opportunities. Just need to be creative and see what coupons are available, and try different stacking combinations.

Also, the 39 cent Craftsman Carpenter Pencil is a great filler item if you need a few cents to get the cart up to the next threshold for coupons, shipping, etc. If it is out of stock online, then just do store pickup on the single pencil, and ship the rest of the order. Then either pick up the pencil, or just call later and cancel the pencil. Also, everyone needs pencils, so it is a filler most people will actual be able to use.

http://www.sears.com/craftsman-best-carpenter-pencil/p-00937591000P?prdNo=1&blockNo=1&blockType=G1

 

[macgee]

Thank You!

 

[EdJack]

My Craftsman Professional Deep Offset Box End wrenches came in.

All the single open stock pieces where - Made in the USA!

The two pieces on the ends with the tags are Craftsman Industrials they had a few weeks ago on the website. The five pieces in the middle are Craftsman Professionals. Everything is Made in the USA. If you buy the sets, they are made in China. But the open stock pieces are still USA.

I've got about $36 bucks into this. Not bad for a full seven piece Made in the USA full polished set. 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23mm.

 

[rice rocket]

Nice score. Now I have to go search for those.

Question is...how many of these are gonna escape out of the box before they get to my door...

 

[EdJack]

Here's all the Deep Offset Box End Wrenches. All on sale, and all Made in the USA.

http://www.sears.com/search=craftsman%20professional%20deep%20offset%20box&Standard_Craftsman%20Professional_0-25?filter=Length_Brand_Price&vDropDown=defaultOpt&autoRedirect=false&levels=Tools_Craftsman+Tools_Craftsman+Tool+Sets+%26+Hand+Tools_Craftsman+Wrenches&sLevel=0&catalogId=12605&previousSort=ORIGINAL_SORT_ORDER&viewItems=50&storeId=10153

The "sets" are China, but the open stock is still USA (at least for now). The seven Metrics come out to $76.71. But then you can use coupon code SAVE15, to bring it down to $61.71. Then you might have $10 in points for $50 in your SYWR, to bring it down to $51.71. Then you might have $10 if future points for $50 in you SYWR, so that effectively makes it like a $41.71 deal. Since these open stock pieces are not tagged as "Hot Buys" on the website, you can get creative stacking coupon codes for the best deal.

The inch sizes are also on sale right now, but I'm passing on them since I rarely use anything but metric.

 

[Car_Guy]

Here's all the Deep Offset Box End Wrenches. All on sale, and all Made in the USA.

http://www.sears.com/search=craftsman%20professional%20deep%20offset%20box&Standard_Craftsman%20Professional_0-25?filter=Length_Brand_Price&vDropDown=defaultOpt&autoRedirect=false&levels=Tools_Craftsman+Tools_Craftsman+Tool+Sets+%26+Hand+Tools_Craftsman+Wrenches&sLevel=0&catalogId=12605&previousSort=ORIGINAL_SORT_ORDER&viewItems=50&storeId=10153

The "sets" are China, but the open stock is still USA (at least for now). The seven Metrics come out to $76.71. But then you can use coupon code SAVE15, to bring it down to $61.71. Then you might have $10 in points for $50 in your SYWR, to bring it down to $51.71. Then you might have $10 if future points for $50 in you SYWR, so that effectively makes it like a $41.71 deal. Since these open stock pieces are not tagged as "Hot Buys" on the website, you can get creative stacking coupon codes for the best deal.

The inch sizes are also on sale right now, but I'm passing on them since I rarely use anything but metric.

OK, you talked me into it, I have been wanting these for awhile, this finally pushed me over the edge.... for some reason I still want the SAE but I think i should be smart like you and pass

 

[rice rocket]

You must've bought the last 16x18, I can't hit $75 for 15 off anymore.

 

[Travisnd]

Nice Ed! My OCD kicked in and I had to have a matching Craftsman Industrial set. These are the same for less $$....nice!!

 

[EdJack]

You must've bought the last 16x18, I can't hit $75 for 15 off anymore.

16x18 is still in-stock online.