PeterT
Well-known member
I'd pull the trigger if they had free shipping.
Drill Dr 750x $70 off
- Thread starter -Brent-
- Start date
alxdgr8
Well-known member
Bought one in Sept. '13, they did a 50% off sale, but it was $180 at that point. I still thought it was a great deal, got the 750X plus two replacement wheels for $125 shipped. Definitely watch the DVD/youtube videos to learn how to use it. Lots of people say it doesn't work well, but I've had nothing but success if I take the time to set it up correctly.
91bronc300
Well-known member
- Joined
- Oct 19, 2009
- Messages
- 2,559
How long does a wheel last?
bikeguy5
Well-known member
Ordered one too. Thanks OP!
alxdgr8
Well-known member
Not sure, haven't had to swap in the replacements yet. I haven't sharpened many, probably 30 so far.
TLCObsession
Well-known member
Thanks! It was on my 'I need one' list since I no longer have access to one - once you use one and see how nice a bit can cut through metal, you never want to be without!
boman
Member
Thanks OP!
mattamd_xp
Well-known member
Ordered one yesterday. Once again saving money by spending money I don't have 
Trey T
Well-known member
Ordered one yesterday. Thanks! Waited on a deal for awhile.
Shrewd1
Well-known member
I'm incredibly tempted, but also wondering if this sale is designed to help clear out some excess inventory to make room for an upcoming 'new' model? Amazon shows the "Date First Available" for the DD 750X as October 2, 2001 so it may be time for a product change.
Thoughts either way?
Thoughts either way?
Honest Bob
Well-known member
Been wanting one of these for a while! Thanks OP!
rancherbill
Well-known member
+1 it's expired
Darex
New member
Hey folks, this is Drill Doctor. We hope you have enjoyed the 50% off coupon code discussions over the last day or two. Those of you who purchased, congratulations, we hope you have a blast using your new Drill Doctor to sharpen all your dull used bits. This coupon code was available in error and it has now expired. If you want to hear about future promotions and new product announcements, you can sign up for our email at DrillDoctor.com. That’s all for now - have a great day and until next time, stay sharp out there!
I had a feeling it might be wrong. If you guys are filling the orders, kudos for standing up!
Darex
New member
The orders will certainly be filled - most are shipping right now. We noticed the coupon error right away but we let it run its course. Congratulations to those of you that acted fast!
Darex
New member
Thanks, Drill Doctor (Darex) for honoring the code. I appreciate it.
Out of curiosity, how many sold?
A little over 100.
Wow, even better.
I can tell you for sure, you will get more of my business in the future and plenty of word of mouth recommendations from me.
Gareth68
Well-known member
Damn, I'm not sure how I missed this one as I check this section regularly.
Ahh well, I'll come upon a nice used one some day.
I simply don't drill enough holes to justify a new one.
But I want....I really want.....
Ahh well, I'll come upon a nice used one some day.
I simply don't drill enough holes to justify a new one.
But I want....I really want.....
BigGMC
Well-known member
LOL at the guy who "can't afford to save anymore money"
I bought one few years ago..... seems like it was about 120 bux at the time.
Anyhow, I really like it. Do pay attention to the instructions so that you can set it up right.
It can sharpen bits to 118deg or 130deg (IIRC).
I ran through some bigger (1/2" plus) old bits that were basically thrashed and chipped to hell and in short order they were good as new.
Go easy with it - dont try to make a sharp bit with one pass - it takes a few (half doz or so) revolutions of the collet/bit for a nice even finish.
I bought one few years ago..... seems like it was about 120 bux at the time.
Anyhow, I really like it. Do pay attention to the instructions so that you can set it up right.
It can sharpen bits to 118deg or 130deg (IIRC).
I ran through some bigger (1/2" plus) old bits that were basically thrashed and chipped to hell and in short order they were good as new.
Go easy with it - dont try to make a sharp bit with one pass - it takes a few (half doz or so) revolutions of the collet/bit for a nice even finish.
ShadowRuleZ
Well-known member
boman
Member
winmck
Active member
Dang it, I need this...
Thanks for honoring the orders. It's hard to find a stand-up company like this any more.
My guess is that your good will gesture will go 10x further than the same amount spent on advertising. You can bet anytime the Drill Doctor name comes up nothing but good things will be said by everyone whose orders were fulfilled.
My guess is that your good will gesture will go 10x further than the same amount spent on advertising. You can bet anytime the Drill Doctor name comes up nothing but good things will be said by everyone whose orders were fulfilled.
rancherbill
Well-known member
I have a Drill Doctor XPC from Canadian Tire and I love it.
I love your products and your response to the situation.
I love your products and your response to the situation.
Adding my thanks to Darex - Drill Doctor for honoring the code. They could just have easily come back and said it was an error and they can't honor the discount. We see statements like that in print sales advertisements all the time.
You guys are now on the 'Good Guys' list here on the Garage Journal. You can be sure if I need a replacement wheel or different grits or any other accessories I will go to there first. We gotta keep these guys in business!
And I got a shipping notice this afternoon
You guys are now on the 'Good Guys' list here on the Garage Journal. You can be sure if I need a replacement wheel or different grits or any other accessories I will go to there first. We gotta keep these guys in business!
And I got a shipping notice this afternoon
Stusmobile
Well-known member
Well played the staff at Drill Doctor.
EarniesGarage
Well-known member
Adding my thanks to Darex - Drill Doctor for honoring the code. They could just have easily come back and said it was an error and they can't honor the discount. We see statements like that in print sales advertisements all the time.
You guys are now on the 'Good Guys' list here on the Garage Journal. You can be sure if I need a replacement wheel or different grits or any other accessories I will go to there first. We gotta keep these guys in business!
And I got a shipping notice this afternoon
Very well said!
And I got a shipping notice yesterday as well.
Thanks DrillDoctor!
MattPSC
Well-known member
Already sent to Darex, but I was on the fence about purchasing one of these. I have quite a few dull bits and was thinking about the Drill Doctor, but due to the size of some of them I was pretty much limited to the 750x. I had the 750x, one of those bench grinder sharpening jigs and some replacement bits in my Amazon cart trying to decide which one to get when I saw this deal. Naturally I jumped on it. If it works as well as the reviews seem to indicate I won't be able to shut up about it and will probably sell a few of them.
ishiboo
Well-known member
This code has been around easily since the 5th of January, we must have really rocked the boat
So I didn't order one of these, simply because I didn't think I'd use it enough. If that ever changes, I'll buy with confidence. So many places these days will just cancel orders and say "we messed up, sorry!" So big kudos to the company for honoring the orders. Consumers are rarely pleasantly surprised these days, so that speaks volumes.
ishiboo
Well-known member
Got mine today... I really like it. The finish on the end of the bit didn't look that great, but they performed really well and held an edge.
Two minor complaints regarding ergonomics. The "depth adjustment" knob is in and very hard to turn. It either needs to be larger or there needs to be better access.
The "cam" action also seems to hang up a bit at one specific point in its rotation (when it is not grinding), if there was a way to get rid of this, it would be great.
Two minor complaints regarding ergonomics. The "depth adjustment" knob is in and very hard to turn. It either needs to be larger or there needs to be better access.
The "cam" action also seems to hang up a bit at one specific point in its rotation (when it is not grinding), if there was a way to get rid of this, it would be great.