To avoid these ads, REGISTER NOW!

Ebay or Auction Deals Permathread!

F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,740
Location
Tacoma, Washington
.... maybe those are his own listings... who knows?

certainly not "deals" by any means...

sorry for the absence.... busy with some other irons in the fire right now and the few times I've looked at Ebay since Friday I haven't seen much that was setting my hair on fire..... although I AM seeing a hell of a lot of ridiculously over-priced Craftsman wrench sets..... what's up with that?
all of a sudden the " VΛ " stuff is somehow "collectible" or "rare" or "vintage" ?!?!?!?! :wtf:
 
To avoid these ads, REGISTER NOW!
F

Famous Tool Guy

Member
Joined
Jan 16, 2014
Messages
19
Location
MN
No not mine at all. They are a buddy of mine who is a tool dealer. If they were mine why would I not say "hey guys...here are some tools im selling!" Lol

And actually his prices are lower than Amazon, Tool Topia, etc. I was just sharing because they are USA made. I know your looking for deals but if your looking for price why don't you buy from Harbor Freight or Lowes?
 
Last edited:
P

PureLeaf

Well-known member
Joined
Jul 25, 2014
Messages
1,417
Famous Tool Guy said:
No not mine at all. They are a buddy of mine who is a tool dealer. If they were mine why would I not say "hey guys...here are some tools im selling!" Lol

And actually his prices are lower than Amazon, Tool Topia, etc. I was just sharing because they are USA made. I know your looking for deals but if your looking for price why don't you buy from Harbor Freight or Lowes?
Click to expand...

Because you can find high quality Wright, SK, Proto, Snap on Etc at good deals on Ebay. Hence the purpose of the thread :beer:
 
OP
P

pauls_workshop

Well-known member
Joined
Mar 7, 2013
Messages
2,788
Location
Indiana, USA - Underappreciated Place to Live!
MW. said:
http://www.ebay.com/itm/23185401999...49&var=531097577009&ssPageName=STRK:MEBIDX:IT

SK Tools 1/4" Dr Fine Tooth Palm Ratchet 3866 OR 3867-Low Profile NEW (Shelf A)
“Ratchet is NEW and UNUSED but has no packaging and may show minor cosmetic signs of wear such as scuffs or scratches.”
Was:US $23.95
You save:US $9.58 (40% off)
Price: US $14.37 + shipping ($3.85 for me)

Out of the low profile ones but these are great little ratchets.
Click to expand...

Wow, those are great little rachets for this price. Very fine action, Sk tough. Head does seem big though in the non low profile size. I have one of these but in the low profile. - Paul
 
M

MW.

Well-known member
Joined
Apr 5, 2015
Messages
113
pauls_workshop said:
Wow, those are great little rachets for this price. Very fine action, Sk tough. Head does seem big though in the non low profile size. I have one of these but in the low profile. - Paul
Click to expand...

Yea, I really wish they were the low profile ones but for the price I couldn't pass it up. A guy at work has a set in 1/4-1/2.. Great ratchets. I'm waiting for a good discount at zoro and I'll pick up a couple of the Proto ones like these.
 
OP
P

pauls_workshop

Well-known member
Joined
Mar 7, 2013
Messages
2,788
Location
Indiana, USA - Underappreciated Place to Live!
Yes MW, the Proto ones made by Facom in Italy are very nice. I just ended up getting a 3/8" and 1/2" Proto in a tool swap trade a couple weeks back. Very much like the Facom SK ones here. I wasn't planning on getting the Protos, but ended up doing it in the trade to make the trade work out. They are real nice rachets, certainly among the very top eschelon of rachets today, including Snap-On, Armstrong, or SK brands or any others. Especially for the price on those Protos. Recommended with the 30% off Zoro discount when they have those next time, probably on Cyber Monday as a few hour flash sale. - Paul
 
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
Rick M said:
Which one is your favorite?
Click to expand...

I really like the SK ratchets, although I'm not a big fan of using knurled handles for extended periods of time (blisters).

The Craftsman tri-wing (Taiwan) I've been using for years and has taken a lot of abuse still works like new.

The Wrights operate very smoothly. All of the Wilde are kind of stiff even after oiling them.

My least favorite are the 2 Fleets. They both feel like the internals are delicate. They also both have a bit of movement in them.
 
F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,740
Location
Tacoma, Washington
you're getting to have a pretty nice collection there, Spn1025 :thumbup:

I notice you got a 3275 Indestro in there.

might want to consider one of the older open-gear model 77 Thorsen 1/2" drive models - I have one or two of the 1/2" drive, two of the 3/8" drive, and two or three (?) of the 1/4" drive models. the 1/2" drive is actually surprisingly smooth in spite of its coarse-gear design.
Indestro also made a similar model - 6070 (1/4") 6270 (3/8") and 6470 (1/2") but the Thorsen actually has a nicer action in my humble opinion. I believe Ganymede did a size comparison on them side-by-side here somewhere.

if you are considering any Stevens-Walden models (their later pear-head design, like the 3150 1/4" drive) avoid anything that's been altered or is missing either of the screws holding it together - they're some screwball sized thread for which no match can be found.

the Fleet you mentioned - is the the old pear-head design, or the later RHFT type?
I have a 1661 Penens (1/2" drive pear-head) - an oldie - and considering the low tooth count I found it amazingly smooth.

in that first photo (the 1/4" drive models) is that an Easco seventh down from the top?
 
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
four.cycle said:
you're getting to have a pretty nice collection there, Spn1025 :thumbup:

I notice you got a 3275 Indestro in there.

might want to consider one of the older open-gear model 77 Thorsen 1/2" drive models - I have one or two of the 1/2" drive, two of the 3/8" drive, and two or three (?) of the 1/4" drive models. the 1/2" drive is actually surprisingly smooth in spite of its coarse-gear design.
Indestro also made a similar model - 6070 (1/4") 6270 (3/8") and 6470 (1/2") but the Thorsen actually has a nicer action in my humble opinion. I believe Ganymede did a size comparison on them side-by-side here somewhere.

if you are considering any Stevens-Walden models (their later pear-head design, like the 3150 1/4" drive) avoid anything that's been altered or is missing either of the screws holding it together - they're some screwball sized thread for which no match can be found.

the Fleet you mentioned - is the the old pear-head design, or the later RHFT type?
I have a 1661 Penens (1/2" drive pear-head) - an oldie - and considering the low tooth count I found it amazingly smooth.

in that first photo (the 1/4" drive models) is that an Easco seventh down from the top?
Click to expand...

yea that 1/4" is an Easco 71 1105, just came in a few days ago.

The Fleet's I have are both pear heads. 3/8" 1261 and 1/2" 1661. They do feel very smooth to use, but just something about them makes them feel delicate/fragile. The both have a bit of movement/wobble in the head.
 
O

OSULemon

Well-known member
Joined
Apr 12, 2013
Messages
237
I looked up the bottom one and it might be collectible? Ebay sales are all over the place.

1p8Cx0J.png


http://tulsa.craigslist.org/tls/5586887957.html
 
Last edited:
To avoid these ads, REGISTER NOW!
W

winlinmac

Well-known member
Joined
Aug 17, 2015
Messages
3,742
Location
USA
According to Knipex,
If you're not the original purchaser of that particular tool, there is no warranty expressed / implied.
http://knipex-tools.com/us/disclaimer/lifetime-limited-warranty/

Rather interesting statement by Knipex,
"This warranty applies only to the original end-user that purchased the tool, and does not apply in any way to failures caused by misuse, abuse, alteration, accident, or tools worn out by use."

Spn1025 said:
Both of them have a broken tip don't they? Unless u want to warranty them lol
Click to expand...
 
F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,740
Location
Tacoma, Washington
^ what's so unusual about that warranty? it sounds perfectly reasonable to me. what sort of warranty is expected out of a set of snap-ring plier tips? or a drill bit? or an E-Z out? or a tap or die?


not necessarily "hot deal" but perhaps of interest to Spn1025 if he hasn't yet seen it. needs a bit of cleaning up:

* shipping costs may vary depending upon your geographic location *

Thorsen 89J 3/8" drive RHFT quick-release ratchet w/thumbwheel
(an odd duck - this is the one where two pins push the socket off the ratchet.)
used
$9.99 + $11.42 shipping now. 0 bids now. ends Fri. 06/17
OR $12.99 + $11.42 shipping "buy now"
http://www.ebay.com/itm/VINTAGE-THO...617554?hash=item2a69f9fdd2:g:NqcAAOSwQupXW1gz
 
Last edited:
F

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,740
Location
Tacoma, Washington
Spn1025 said:
yea that 1/4" is an Easco 71 1105, just came in a few days ago.
Click to expand...

I thought it looked familiar. I have a 71-1106 sitting here next to the keyboard, which looks the same from the top, but has a thumbwheel on the drive side.
Would I be correct in assuming the 71-1105 does not have the thumbwheel?
Got this one with a set of 1/4" drive Thorsen sockets and a mix of KAL and Thorsen extensions.
It's missing the detent ball, so it won't hold a socket. Wonder if a guy could find a kit for it of it it's just not worth messing around with?
Probably just be simpler to find another 77MC Thorsen and complete the set!
 
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
four.cycle said:
I thought it looked familiar. I have a 71-1106 sitting here next to the keyboard, which looks the same from the top, but has a thumbwheel on the drive side.
Would I be correct in assuming the 71-1105 does not have the thumbwheel?
Got this one with a set of 1/4" drive Thorsen sockets and a mix of KAL and Thorsen extensions.
It's missing the detent ball, so it won't hold a socket. Wonder if a guy could find a kit for it of it it's just not worth messing around with?
Probably just be simpler to find another 77MC Thorsen and complete the set!
Click to expand...

Thumb wheel on the bottom (which I'm not too crazy about). Here's the listing:
http://www.ebay.com/itm/Vintage-Eas...fQssxyZ6TRyKOD0j%2FaM%3D&orig_cvip=true&rt=nc
 
M

MW.

Well-known member
Joined
Apr 5, 2015
Messages
113
Spn1025 said:
^ got one. No more low profile ones :(
Click to expand...

Got mine today. Be ready to clean out the old dried up grease out of the ratchet before it will work right. Looked more like wax than grease. Works great now.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom