Ebay or Auction Deals Permathread!

[Crabman]

Received the metric wrenches. They are really nice. Bruce

 

[brokeboater]

Small potatoes but if you need a 1/2" counter sink it's a good buy.

Vermont American 16634 1/2" High Speed Steel Countersink, $3 + $3 shipping.

https://www.ebay.com/itm/Vermont-Am...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

In spite of the name it is Chinese.

 

[Crabman]

I had a PM about the metric wrenches. They are a bit smaller than "standard" (a subjective question) I would say. The 13mm is about 6 1/2" and the 10mm a bit under 5 1/2 if that helps anyone. Bruce

 

[LNKMK8]

New Proto 18" Adjustable Wrench 718 Satin Finish (not Clik-stop) $30 Shipped:

https://www.ebay.com/itm/New-18-Sta...m-Adjustable-Crescent-Wrench-USA/372618179646

8 Available... (seller also has some other sizes at decent prices)

 

[Mbsk01]

New Proto 18" Adjustable Wrench 718 Satin Finish (not Clik-stop) $30 Shipped:

https://www.ebay.com/itm/New-18-Sta...m-Adjustable-Crescent-Wrench-USA/372618179646

8 Available... (seller also has some other sizes at decent prices)

Thank you Sir.

 

[mrspeed]

New Proto 18" Adjustable Wrench 718 Satin Finish (not Clik-stop) $30 Shipped:

https://www.ebay.com/itm/New-18-Sta...m-Adjustable-Crescent-Wrench-USA/372618179646

8 Available... (seller also has some other sizes at decent prices)

That was tempting, but I got the Proto 8" adjustable wrench that was posted here previously, and while nicely finished, the jaw has much more play than the same sized Irega.

Sent from my Pixel 2 using Tapatalk

 

[Crabman]

New Proto 18" Adjustable Wrench 718 Satin Finish (not Clik-stop) $30 Shipped:

https://www.ebay.com/itm/New-18-Stan...A/372618179646

Also thank you sir. I got the last one. Really nice item. Bruce

 

[LNKMK8]

They listed 5 more (4 available) of the 18" Proto, but the price is now $30 + $8 shipping. Still a decent buy: https://www.ebay.com/itm/New-18-Sta...m-Adjustable-Crescent-Wrench-USA/372618789762

 

[a52-830]

They listed 5 more (4 available) of the 18" Proto, but the price is now $30 + $8 shipping. Still a decent buy: https://www.ebay.com/itm/New-18-Sta...m-Adjustable-Crescent-Wrench-USA/372618789762

likely wondering what happened when it was listed for a few days and then *BAM* a bunch sell all at once. makes you think you left money on the table . . . .

 

[leftyz]

Just dropped it 4 bucks, hmm.. 34 bucks but do i need it? Ah what the hell

Sent from my ONEPLUS A5000 using Tapatalk

 

[netbrad]

These looked like a good set of spares but shipping is $18.00. You might get better shipping if you live closer.

https://www.ebay.com/itm/TrueCraft-10-Pc-Combination-Metric-Wrench-Set-8645-Lifetime-Warranty/282445960651

 

[gtodoc]

Just dropped it 4 bucks, hmm.. 34 bucks but do i need it? Ah what the hell

Sent from my ONEPLUS A5000 using Tapatalk

I had the same decision....thanks to the OP for finding and posting this.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[a52-830]

6 piece Set Powerbuilt 3/4-inch Drive SAE 12 point Chrome Sockets Priced Low

 

[Bedwell]

The 18" Proto adjustable is back in stock

 

[buddylee1998]

The 18" Proto adjustable is back in stock [emoji481]

Already gone again

Sent from my SM-G930V using Tapatalk

 

[JMToolCo]

my 18" proto came in an empty box, seller pretty much told me it was my problem. claim opened with ebay

 

[bubinga]

my 18" proto came in an empty box, seller pretty much told me it was my problem. claim opened with ebay

What A Jag-Off.
Was there A big hole in the Box, or was it sealed up?

 

[a52-830]

my 18" proto came in an empty box, seller pretty much told me it was my problem. claim opened with ebay

check the shipping weight, either on the tracking, or on the shipping label.

that should help.

 

[JMToolCo]

i think im finally getting my money back on the proto deal, everyone else happy with the wrench they got?

 

[JimH74]

I'm pleased with my 18" Proto adjustable. I'm thinking about ordering the 4". Don't need it, but that's not important! This is GJ!

 

[Crabman]

Mine was very nice and new.

Bruce

 

[LNKMK8]

Mine was fine, but was not securely packaged in the box. I could see how one could escape along the way.

 

[RKA]

Sunday is the last day of the quarter. I’m gambling (hoping) there will be one more good coupon between now and Sunday. Got my cart loaded up!

 

[jshillin]

Sunday is the last day of the quarter. I’m gambling (hoping) there will be one more good coupon between now and Sunday. Got my cart loaded up!

I sure hope so.... Want to buy a mulching kit for my new mower!

 

[TTMotorsports]

https://www.ebay.com/itm/X-4-Torque...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

Bought one of these as have quite a few other guys i know. Great for breaking nuts loose on half shafts and other big nuts

 

[BajaScout]

https://www.ebay.com/itm/X-4-Torque...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

Bought one of these as have quite a few other guys i know. Great for breaking nuts loose on half shafts and other big nuts

Got me one.

Looks pretty handy to have.

 

[nmantas]

https://www.ebay.com/itm/X-4-Torque...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

Bought one of these as have quite a few other guys i know. Great for breaking nuts loose on half shafts and other big nuts

I have one from him too. Came out like new with disassembly, ultrasonic cleaner, and regrease (I used CV joint crease). The gears had zero evidence of wear but seemed to be filled with old white lithium grease that was turning gummy.

 

[TTMotorsports]

I have one from him too. Came out like new with disassembly, ultrasonic cleaner, and regrease (I used CV joint crease). The gears had zero evidence of wear but seemed to be filled with old white lithium grease that was turning gummy.

That's my plan as well to tear apart and ultrasonic clean with simple green.

 

[chipdog4]

Looks like a decent deal on Chicago Latrobe Fine thread Drill and Tap Index. From 6-40 to 1/2-20
About half the price compared to Zoro.
Make an offer, too!

https://www.ebay.com/itm/18-Piece-Tap-Drill-Set-Chicago-Latrobe-Huot-Drill-Index-St-Paul-52580-HT-18/163608831092?epid=5024234914&hash=item2617d8a474:g:6KUAAOSw5wJcPMT6

https://www.zoro.com/chicago-latrobe-set-drill-and-tap-18pc-52580/i/G3227165/

 

[bubinga]

Looks like a decent deal on Chicago Latrobe Fine thread Drill and Tap Index. From 6-40 to 1/2-20
About half the price compared to Zoro.
Make an offer, too!

https://www.ebay.com/itm/18-Piece-T...234914&hash=item2617d8a474:g:6KUAAOSw5wJcPMT6

https://www.zoro.com/chicago-latrobe-set-drill-and-tap-18pc-52580/i/G3227165/

Yes it Is a good deal. I'm half tempted, but have to watch my money right now.

 

[Farmall450]

Looks like a decent deal on Chicago Latrobe Fine thread Drill and Tap Index. From 6-40 to 1/2-20
About half the price compared to Zoro.
Make an offer, too!

https://www.ebay.com/itm/18-Piece-Tap-Drill-Set-Chicago-Latrobe-Huot-Drill-Index-St-Paul-52580-HT-18/163608831092?epid=5024234914&hash=item2617d8a474:g:6KUAAOSw5wJcPMT6

https://www.zoro.com/chicago-latrobe-set-drill-and-tap-18pc-52580/i/G3227165/

Some nice American Iron right there.

 

[mrspeed]

Great deal on the Klein 8-in needle nose pliers. 2 left:

D203-8 - $14.56 + free shipping: https://www.ebay.com/itm/283479200845?ul_noapp=true

 

[protegeV]

Great deal on the Klein 8-in needle nose pliers. 2 left:

D203-8 - $14.56 + free shipping: https://www.ebay.com/itm/283479200845?ul_noapp=true

got one, thanks!!

 

[Pontiac787]

15% off $25+ 20% off $150+

https://www.ebay.com/rpp/75956?_trkparms=%26clkid%3D3343213786001545148

It's for targeted sellers but I just scored a Milwaukee Mid-Torque Impact for $144.

 

[MJK]

^^^ Thanks. Got a Hoover UH70210 vacuum for $68 shipped thanks to the PRESUMMER coupon. Not bad considering the previous one (same model) did pretty well for 7 years and runs $120 on Amazon.

 

[bubinga]

^^^ Thanks. Got a Hoover UH70210 vacuum for $68 shipped thanks to the PRESUMMER coupon. Not bad considering the previous one (same model) did pretty well for 7 years and runs $120 on Amazon.

With Tax, It was In my cart for $80.00 Said offer was applied.
Naw, $69.18 guess it wasn't applied.
I don't know weather to get it or not.
Does that have a Bag you have to change, or just a canister that you empty?
The code is good all day tomorrow Right?

 

[gamp945]

With Tax, It was In my cart for $80.00 Said offer was applied.
Naw, $69.18 guess it wasn't applied.
I don't know weather to get it or not.
Does that have a Bag you have to change, or just a canister that you empty?
The code is good all day tomorrow Right?

Bubinga, buddy. Please search your post history and take your own advice to "watch your money"!

 

[MJK]

With Tax, It was In my cart for $80.00 Said offer was applied.
Naw, $69.18 guess it wasn't applied.
I don't know weather to get it or not.
Does that have a Bag you have to change, or just a canister that you empty?
The code is good all day tomorrow Right?

Mine showed:
Subtotal $74.99
Sales tax $4.20
Shipping Free
Total coupon amount -$11.25
Total $67.94

No bag to empty. Dunno about the code?

 

[Fatboy148]

Wish I was closer, I would like to have a nice HD stand and the asking price for old, used Baldor stands is more than $350. I guess they don't wear out.


Baldor Electric 0.75 HP 8 in. Industrial Bench Grinder 8107W ALMOST NEW. This set cost over $1600 & the unit have less than 5 hours of use . Single Phase. Comes with heavy duty stand



Baldor Electric 0.75 HP 8 in. Industrial Bench Grinder 8107W slightly used”

Condition:Used
Time left: Time left:3d 07h Thursday, 4:00PM
Starting bid:US $350.00
[ 0 bids ]

Place bid -
Enter US $350.00 or more
Price:US $685.00 Buy It Now -


https://www.ebay.com/itm/Baldor-Electric-0-75-HP-8-in-Industrial-Bench-Grinder-8107W-slightly-used/173913845337?hash=item287e12ae59:g:4hsAAOSwprpc3Csy

 

[ex_nihilo]

I noticed that one too. Looks like he modified the right wheel guard. I would have just taken it off to buff with rather than that. I'm sure opinions vary.

Sent from my SM-G973U using Tapatalk