Found a deal on craigslist? - List Here!

[Shop Dad]

Sorry to have brought this up, this thread is about making aware of good deals for GJ members throughout the USA and not about some flipper in LA.

I'm sure he prefers to think of himself as a very expensive cleaning service...

 

[larryq]

Nice Littletown vise for $8 in Hayward CA. "pick up in san pablo or castro valley"

http://sfbay.craigslist.org/eby/tls/5478344241.html

 

[macgee]

Proto Tool Cabinet Chest Box on Wheels - $55

"This is 6 drawer cabinet on casters. There are 5 sliding drawers and one cabinet. As you can see from the pictures, the cabinet is not in perfect shape, but it's still solid! There's no major damage, just some surface rust and grime from years of use and it's slightly out of alignment.

It measures 18" deep x 27" long x 40" high.

Here's your chance to own a top of the line brand name for a fraction of the price"

http://losangeles.craigslist.org/sfv/tls/5474946710.html

 

[Shiftless]

Another steal of a deal found by macgee!
Gotta love those drawer handles!
Somebody pick this one up quick!

 

[CNGsaves]

Welding table with vise - - - - this thing is HUGE

7 ft long x 3 ft wide x 34" tall

GJer in the area should snag this if they've got some room !!

Region Midwest USA

Location Rogers, AR

Item Welding Table

Price $ 200 or best offer

Link
https://fayar.craigslist.org/tls/5478029169.html

 

[larryq]

Proto Tool Cabinet Chest Box on Wheels - $55

Thanks for sharing, great find at a great price. I'm 400 miles away and even so instinct kicked in and I thought for a half-second "is there enough gas in the truck..?"

 

[Mavawreck]

Craftsman Alien Head Planer

https://eastnc.craigslist.org/for/5432620729.html

Morehead City NC, $150.00

 

[macgee]

Another steal of a deal found by macgee!
Gotta love those drawer handles!
Somebody pick this one up quick!

Thanks for sharing, great find at a great price. I'm 400 miles away and even so instinct kicked in and I thought for a half-second "is there enough gas in the truck..?"

Thanks guys, It's not too far away from me. I'm happy to grab it for someone if they want to trade me a small Lista/Vidmar for it

 

[timmyisme22]

Stacking units and nuts/bolts in central Washington:
--------------------------------------------------

Stack on Nut and Bolt Display Units (Yakima)

Eighteen Sharon's Stackable Counter Displays with six bins of nuts and bolts in each unit.
$30.00 to $60.00 each bin depending on number of nuts and bolts.
Will take offer on all of them

 

[timmyisme22]

Automotive Paint Mixing Bank - $500 (West Valley) [Yakima]

Automotive Paint Mixing Bank. Some PPG Toners included. This is in great shape.
Call or text "show contact" info $500 obo

 

[timmyisme22]

Justrite 24160 Acids and Corrosives Safety Cabinet - $500 (Yakima)

This cabinet is in very good condition. Doors close tight, no issues.


---------------------

Amazon has it new at $955 current and $765 lowest. Could probably get it lower too.

 

[timmyisme22]

Forgot to mention. If you're ever in the Yakima/Union Gap area and have time/space for larger items, stop by our local restore. They have some good over workbench/counter storage units at times among other metal shelving (think Sandusky Lee stuff, only the older sturdier designs from many different brands).

Just something to keep in mind if you're in the area (On Mead near 1st).

 

[Cypherian]

QUICK WHO IS AWAKE AND UP NEAR NEWARK DELAWARE ????? SMOKING DEAL !!



http://delaware.craigslist.org/tld/5479452210.html

Eight drawer toolbox and a lot of machinist tools, Starrett, others...everything shown, $125 OBO. #1603006


reply by email:
[email protected]

 

[Default_Man]

Can't ever beat free, better hope it's not gone by the time you arrive.

http://portland.craigslist.org/wsc/tls/5480148058.html

 

[larryq]

Can't ever beat free, better hope it's not gone by the time you arrive.

http://portland.craigslist.org/wsc/tls/5480148058.html

pics for posterity-- 10" Delta table saw. "Has stand that has a bent leg but table saw is fine. Leg can be bent back into place.

Can also be removed from stand and used on bench."

 

[derek245583]

https://cincinnati.craigslist.org/tls/5457883435.html

Never seen a snap-on toolbox for that cheap-- $650

 

[Cypherian]

Hey Anyone In West Chester PA ???? GO GO
Huge Free Grinding machine for parts or scrap. Lathe Mill. (West Chester, PA)

http://philadelphia.craigslist.org/zip/5481715396.html

Those interested please read:

1. Respond with Only "WC grinder" in subject line so I know you're not an automated response. Responses without this will be deleted.

2. Respond with a phone number in the body of the email for me to reply to.

3. Tell me what equipment you have and plan to use to remove this. Please note a pallet jack does not fit underneath.

Equipment needs to be picked up AFTER 5PM today or tomorrow. This is an enormous piece of Swiss made grinding machinery that probably weighs at least 2 tons and NEEDS TO BE REMOVED FROM OUR FACILITY. Similar to a mill or a large lathe. There is clear passage to our loading dock. YOU MUST HAVE A WAY TO REMOVE THIS MACHINE AND EQUIPMENT. Please do not message if you do not know how to move equipment of this size or are planning to put this in the back of a pickup truck. This will require a large truck. For everyone's safety, those who show up with inadequate means to remove the equipment will be turned away.


The parts alone are worth a lot of money and there is a ton of scrap metal here. Local pickup in West Chester PA.

http://images.craigslist.org/01111_dezYQHbsw3B_600x450.jpg

 

[IUEC Medic]

Pretty cool custom build - tool cart made from a HF 44" top box.

http://sfbay.craigslist.org/eby/tls/5476566162.html

(Not mine)

Located somewhere around Fairfield ca ( about an hour outside east Bay Area)

 

[Chilliwack Murray]

http://vancouver.craigslist.ca/rds/hvo/5422621698.html

This is a lathe and a half for sure.

 

[derek245583]

50 year old Snap-On box, stacked. He wants us to make an offer.

Could be a steal if its fully functional, like he says.

http://cincinnati.craigslist.org/tls/5486160963.html

 

[ineedtools]

Someone grab that SO box, you can still get keys/locks from SO (via Jonco) pretty cheap, if you have the lock # you can just buy keys too. I've rekeyed my heritage boxes to the new rounds. Would love to have this box if it was closer.

 

[derek245583]

Someone grab that SO box, you can still get keys/locks from SO (via Jonco) pretty cheap, if you have the lock # you can just buy keys too. I've rekeyed my heritage boxes to the new rounds. Would love to have this box if it was closer.

I already sent the guy an email asking if I could come look at it. Assuming you are talking about the one I posted...

 

[Tucker99]

What's a fair price to pay for this box? Did they put rollers in the larger bottom drawers back then? I've seen these before and folks want huge money for them.

 

[derek245583]

What's a fair price to pay for this box? Did they put rollers in the larger bottom drawers back then? I've seen these before and folks want huge money for them.

He just sent me back a message and said he would sell it all for $400

I was expecting a HUGE number like you

 

[Shiftless]

Yeah, if you can use that configuration with the big bins as bottom drawers, go for it. That seems to be a fair price if the sliders work OK or you are willing to convert to modern rollers. I have heard of friction sliders lasting almost forever if you keep 'em clean and well greased. That narrow upper "side box" is very cool!

 

[ineedtools]

He just sent me back a message and said he would sell it all for $400

I was expecting a HUGE number like you

You need to go get this!

 

[derek245583]

You need to go get this!

He will sell it to me for $200!!

 

[Shiftless]

I hope by now that box is in your garage or at least loaded into your truck.

 

[930dreamer]

Dumbwaiter motor, 3 phase-2hp

http://amarillo.craigslist.org/mat/5482879119.html

 

[930dreamer]

Vintage Snap On wheel balancer-$100


http://amarillo.craigslist.org/tls/5486178424.html

 

[ineedtools]

He will sell it to me for $200!!

I knew I should have just got in the truck after work and drove all night I could have been home with it tonight....someone is getting a hell of deal on that classic.

 

[7avalon7]

I knew I should have just got in the truck after work and drove all night I could have been home with it tonight....someone is getting a hell of deal on that classic.

I happened to pass by near this area, so I took a detour to see this box this morning (Saturday). I did not bought it - maybe this is a good deal for SO box but it seems to be in worse shape than what I expected.

Box was dirty (expected - which is fine with me). The top box has broken top latch. The bottom box the last 2 drawer is hard to pulled - I think this is due to a dent in the drawer. Some surface rust in the bottom rear. The rest of the drawers on both were hard to pull out, but maybe some grease and clean up would help. Box was stored in corner of dark garage, so it is kinda hard to see. I had little flashlight from my phone to check it out. Overall pretty worn out for me - maybe this is a good deal for someone, but just not for me. I also find out that someone look at it Friday, and obviously didnt purchase it - I wonder if this person is from GJ....

I texted the seller Friday evening that I will be there 10-10:30AM. The seller made me wait 45 min before he showed up. At that time, I was in a hurry because I need to be somewhere else at noon, so I only look at it for like 10 min then left. Seller is pretty set on price at $200. I really didnt have time to haggle as I am running late, and pissed since I waited 45 min for him to show up. I texted and called the seller several time while waiting, and the seller kept saying just a few min. Only after I tell the seller that I am leaving, he showed up immediately while we were on the phone, made me wonder if he was just sitting somewhere watching us in the car steaming....

Hope this helps someone. So the search continue for a tool box for me...

 

[Richard Cranium]

the ad has been pulled for the snap on tool box, I hope one of you guys got it.

 

[derek245583]

the ad has been pulled for the snap on tool box, I hope one of you guys got it.

I never went and looked at it. My wife had me running all sorts of errands and couldnt make it there. His original ad had him located right next to me but he claimed he "messed up" and was actually 45 minutes away.

I just bought a brand new HF 44" box and a 31" used Snap-On for cheap. I really didnt need this one, but I am drawn to these deals now like a moth to a flame because I cant score a HD deal.

 

[ineedtools]

the ad has been pulled for the snap on tool box, I hope one of you guys got it.

I sure hope someone here got it.

It was a steal even with the rehab costs and time for $200. Never anything priced like that around here.

I bought my Heritage series top box for $350 and then waited another year and change to find the bottom matching for $400 and then got lucky and found a matching sidebox for $75.

Put about $150 in them with the new matching SO locks, set of HD casters, and some slide replacements plus a lot of sweat and time.

I would have been tickled pink to get that top and bottom for $200 and put another $200 in it to make it perfect.

If anyone needs a single lock with key let me know I have one from my Heritage top box, pay postage and it's yours just have to dig it up.

 

[macgee]

Takang TK-330 Toolroom Lathe, 13" Swing, 30" Center Distance. $609 (South Gate, CA)

Does look like it needs some love to get it going again but shoot him an offer but I would spend some time figuring out whats wrong with it prior to paying, take a look at the cross slide hand wheel, there's something wrapped around it. Looks like it may have an old school DRO and coolant as well. Just add a quick change post. These are asian lathe's but if you can get the price down a bunch then it might be worth it. Check to see if it has imperial markings on the dials and not metric.

"Used lathe. I am not familiar with these type of machines. I was told it needs 1 or 2 parts to operate properly.
I have no need for it so make me an offer. See pictures or call pls."


PS> Always ask if there's any parts laying around for it. It's always very good to find the tooling for it.

http://losangeles.craigslist.org/lgb/tls/5491268388.html

 

[bubinga]

that lathe is nice?

 

[larryq]

Takang TK-330 Toolroom Lathe, 13" Swing, 30" Center Distance. $609 (South Gate, CA)

$605 should get it home...just kidding, I wonder what it weighs? 1500 lbs?

 

[ineedtools]

$605 should get it home...just kidding, I wonder what it weighs? 1500 lbs?

Just shy of a ton bare, the 450 comes in at exactly 2000# the 330 was just over 1800#

Not a bad deal depending on what it needs considering in 1984 this machine was north of $12K depending on chuck and tooling also branded as Ramco and Liberty IMMSC

 

[bubinga]

not a steal, but pretty nice vintage craftsman bottom box for $100.00
Vintage Craftsman bottom tool box - $100<small> (Dillonvale,Oh)</small>

http://wheeling.craigslist.org/tls/5460416966.html