Found a deal on craigslist? - List Here!

[Joes89yj]

If these are by chance all 7 for $150 that's a ridiculous steal... Even at $150 each it's pretty good.


Edit: I emailed them, they're asking $150 each... but they're in a pinch to move them..

Asking $150 each.

3.5' wide x 5.5' tall x 1.5' deep on four of them.

3' x 3' x 5.5' on four of them.

"Expensive flame cabinets that have to go. Looking to get them.moved by Wednesday. 7 in total. Great shape. Cash only. We can load them into your truck.

Come and get it!"

https://kansascity.craigslist.org/tls/5733581048.html

 

[Shiftless]

Great buy for $50 "must sell" (you know what that means)
Beginning blacksmith?

Get the vise for $50 or less and that chunk of I-beam is free!

http://sandiego.craigslist.org/nsd/tls/5729201666.html

 

[cdeer001]

A Crown Top classic -

http://washingtondc.craigslist.org/nva/tls/5715008895.html

Horizontal Bandsaw - Craftsman Commercial USA made - $165 (North Arlington, Virginia)

This horizontal cutoff bandsaw is genuine US made and is in excellent condition - used very little. It has some unique features and is way better then the import variety. Specifically, it has a sensitive adjustable hydraulic downfeed control, a quick release and adjusting vise, and automatic turn off at the end of the cut. These features make a huge difference in the accuracy of the cut and ease of use. The blade tensioning and tracking are also much more precise than what you get today. They don't make them like this any more and this is an extremely good example.

Included is a Dayton single phase motor but you'll have to mount and wire it.

 

[larryq]

Kennedy top and bottom for $150 in Manteca CA, could do worse.

http://modesto.craigslist.org/tls/5699978057.html

 

[larryq]

Here's the often-talked about US General (rebadged BelAire) 60 gallon compressor, this one in Santa Clara CA for $375. "works great"

http://sfbay.craigslist.org/sby/tls/5734048606.html

 

[1Garageman]

Is this a good deal???
https://www.menards.com


Sanborn 60-Gallon Vertical Stationary Air Compressor
Model Number: SL3706056
Online Price
$381.81
Everyday Low Price: $449.00 Sale Price:$429.00
11% Mail-In Rebate: $47.19
Your Final Price: $381.81

You Save: $67.19 After Sale Price & Mail-In Rebate

135 max PSI
13.4 CFM @ 40 PSI
11.5 CFM @ 90 PSI
240 Volt
Large capacity, 60 gallon ASME* air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc.
Cast Iron Twin Cylinder Pump that features a one-piece cast iron crankcase and a thermally stable cast iron cylinder body
Shipped with synthetic oil for optimum performance and long life
2 Year Limited Warranty

 

[GForceJunky]

Is this a good deal???
https://www.menards.com


Sanborn 60-Gallon Vertical Stationary Air Compressor
Model Number: SL3706056
Online Price
$381.81
Everyday Low Price: $449.00 Sale Price:$429.00
11% Mail-In Rebate: $47.19
Your Final Price: $381.81

You Save: $67.19 After Sale Price & Mail-In Rebate

135 max PSI
13.4 CFM @ 40 PSI
11.5 CFM @ 90 PSI
240 Volt
Large capacity, 60 gallon ASME* air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc.
Cast Iron Twin Cylinder Pump that features a one-piece cast iron crankcase and a thermally stable cast iron cylinder body
Shipped with synthetic oil for optimum performance and long life
2 Year Limited Warranty

That's this same compressor:

http://www.princessauto.com/en/detail/60-gallon-oil-lubricated-belt-drive-air-compressor/A-p8348955e

Looks like it's decently well rated - only 1 rating out of 15 below a 4/5 and that one was just a rating, no review.

 

[Colin Len]

I wish I was at the point with my garage where I was ready to buy some drawer units because it appears this guy has a very nice selection to choose from.

Small drawer metal cabinets - $100 (N. Fontana)
http://losangeles.craigslist.org/sgv/fuo/5738049614.html

I got about 20 pieces of these great cabinets that have small drawers. They are great for index cards, envelopes, tools and parts. Price range from $100 to 200 a piece. Give me a call for dimensions and pricing. I will put better pics tomorrow.. I can deliver for a fee.

 

[a52-830]

I wish I was at the point with my garage where I was ready to buy some drawer units because it appears this guy has a very nice selection to choose from.

are those *punch card* cabinets?

i remember being in a room once, with, literally, 100 of those kinds of cabinets, ten or twelve drawers high, all identical, arraigned in rows.

wow, it takes you back . . .

 

[Colin Len]

are those *punch card* cabinets?

i remember being in a room once, with, literally, 100 of those kinds of cabinets, ten or twelve drawers high, all identical, arraigned in rows.

wow, it takes you back . . .

I have no idea. There look to be a variety of different drawer sizes and overall configurations so I assumed they had varying original uses.

 

[Jeepster425]

If I had the money available I'd definitely jump on it

9000 Lbs Prolift Car/Truck Hoist - $1200

http://spokane.craigslist.org/tls/5739113419.html




Sent from my SM-G925T using Tapatalk

 

[B.Ellis]

Quincy 370 compressor $700

http://cenla.craigslist.org/tls/5739975794.html

No idea but compressors get lot o love around here so maybe a good deal

 

[Shiftless]

Craftsman Block grinder (half horse) for $25 near San Diego CA

http://sandiego.craigslist.org/esd/tls/5740068982.html

 

[Ole Slewfoot]

$ 40

lil rust, but probably way better than the scrap they sell now.

http://sfbay.craigslist.org/eby/tls/5741205754.html

Sears brand tool box. In very good condition. The drawers and slides still work perfectly and very clean. On casters to move around very easily if needed.

Thanks

 

[Shiftless]

Arbor press for only $15 ???
In San Francisco

http://sfbay.craigslist.org/sfc/tls/5742623805.html

 

[larryq]

Vintage drill press in Fairfield CA for $65. Candey-Otto brand.

http://sfbay.craigslist.org/eby/tls/5740770113.html

Here's a gallery on the same model at vintagemachinery.org:

http://vintagemachinery.org/photoindex/detail.aspx?id=9238

 

[bubinga]

http://pittsburgh.craigslist.org/tls/5744082399.html
Drill press looks like a 100 or an 80
$50.00

Vintage drill press in Fairfield CA for $65. Candey-Otto brand.

http://sfbay.craigslist.org/eby/tls/5740770113.html

Here's a gallery on the same model at vintagemachinery.org:

http://vintagemachinery.org/photoindex/detail.aspx?id=9238

Sent from my MotoG3 using Tapatalk

 

[MEngineer]

Seattle

Champion air compressor 3ph 60 gallon $350

http://seattle.craigslist.org/skc/bar/5746320628.html

 

[bubinga]

Damn, I wish I had the money for this,
Storage Drawer Unit / Cabinet / Chest - $60<small> (mckeesport)(Pittsburgh craigslist)</small>

http://pittsburgh.craigslist.org/tls/5751229704.html

 

[larryq]

Wow-- a Mac & SnapOn roller combo for $200 in Antioch CA. With a side shelf. (I really need to find a bigger garage.)

http://sfbay.craigslist.org/eby/tls/5751708913.html

 

[KLO101489]

Snap-on Taco Cart, KR562A, for $250 in the Bay Area. Also says it needs to go so he would probably let it go for $200. No pictures, unfortunately but could be a good score.

http://sfbay.craigslist.org/eby/tls/5752829178.html

 

[Wanna Ride]

That's this same compressor:

http://www.princessauto.com/en/detail/60-gallon-oil-lubricated-belt-drive-air-compressor/A-p8348955e

Looks like it's decently well rated - only 1 rating out of 15 below a 4/5 and that one was just a rating, no review.

Princess Auto, so presumably that's the Canadian price. Exchange rate is around 75%, so that's about $524 USD.

I bought the same compressor about 20 years ago at Menard's for $369. Still alive and kicking today, in the corner of my garage.

 

[larryq]

Another reason for a bigger garage. Looks like a Vidmar or Lista roller box for $100 in Napa CA:

http://sfbay.craigslist.org/nby/tls/5747256487.html

 

[P_856]

Large vise in south jersey only $10!!!

http://southjersey.craigslist.org/tls/5755939592.html

 

[Jeepster425]

Snap On KR1000 Dale Earnhardt Tool Box - $1000

https://spokane.craigslist.org/tls/5756859037.html




Sent from my SM-G925T using Tapatalk

 

[Gigem]

Might be a deal in Houston, no price listed.

 

[sgs236]

Region: East

Location: Pittsburgh

Item: 8' Metal Work Bench- seller has 8 for sale.

Price: 50 EA

Link: http://pittsburgh.craigslist.org/tls/5758185163.html

This seems like a great deal for metal work benches. They look like they are quality benches to me.

 

[larryq]

Here's a great deal for someone. Powermatic drill press in Sunnyvale CA for $80. "In full working condition"

http://sfbay.craigslist.org/sby/tls/5758630958.html

 

[NKlamerus]

Old MAC box. http://okaloosa.craigslist.org/tls/5760056233.html

I messaged the owner but no response yet.

 

[larryq]

Old MAC box. http://okaloosa.craigslist.org/tls/5760056233.html

I messaged the owner but no response yet.

Hope you get it, only $75??

 

[NKlamerus]

Hope you get it, only $75??

Yeah, he says I'm 12th in line lol

 

[larryq]

I'll let others judge on whether this is a good deal, but here's a vertical mill for $450 in San Leandro CA.

http://sfbay.craigslist.org/eby/bfd/5750600883.html

 

[whisperinsam33]

Two 3 Bay Tool Boxes in Atlanta for under $2000

SNAP ON:
http://atlanta.craigslist.org/nat/tls/5766067730.html

MATCO:
http://atlanta.craigslist.org/nat/tls/5770180682.html

 

[S4cruiser]

Couple local deals that I'm passing on...too many drill presses and grinders already

Old style craftsman drill press. Still has the condom top ! http://greensboro.craigslist.org/tls/5772672148.html

Decent looking Rockwell 7" grinder with matching stand. $200 http://raleigh.craigslist.org/tls/5772461985.html

 

[a52-830]

Kennedy K-32 Carpenter's Tool Box - $35 (hartford area)


http://hartford.craigslist.org/tls/5738228056.html

if this was close, i'd go down and get it. the ad is over three weeks old, there might be some flexibility in the price.

 

[a52-830]

looks like an older (late 1980's/early 1990's) vintage wide craftsman rolling box and top. made 40" wide. 200$ is a great deal own what is likely a pretty good box.

http://boston.craigslist.org/sob/tls/5775171696.html

 

[Bill Bowman]

Snap on ratchet ? $20.00

http://chicago.craigslist.org/nwi/tld/5775358470.html

 

[Wanna Ride]

Re: Snap on ratchet ? $20.00

http://chicago.craigslist.org/nwi/tld/5775358470.html

Nice "wrench"...

 

[speedpro]

Re: Snap on ratchet ? $20.00

http://chicago.craigslist.org/nwi/tld/5775358470.html

Who sells a single wrench? Something sketchy about that.

Reminds me of the time someone came up to me at a gas station and said they had all kinds of tools for sale cheap in their trunk. Yea, no thanks.

 

[a52-830]

pssst, hey kid, live north of boston? want a winter project? how about this: what appears to be a kr557 bottom, for 100$:

http://nh.craigslist.org/tls/5776167986.html

and what appears to be a kr537 top, for 150$:

http://boston.craigslist.org/sob/tls/5775630002.html

if i wasn't already swimming in tool boxes . . . . . .

even in this shape, 250$ doesn't seem bad to me, and you can always make an offer . . . . as they say, cash talks . . . .