Found a deal on craigslist? - List Here!

[Wanna Ride]

Re: Snap on ratchet ? $20.00

Who sells a single wrench? Something sketchy about that.

Reminds me of the time someone came up to me at a gas station and said they had all kinds of tools for sale cheap in their trunk. Yea, no thanks.

Have you ever browsed categories on CL? All kinds of $5-10 items on there.
A single $20 item is pretty common. Just because you wouldn't sell a single $20 item, doesn't mean some high-school kid with no real income or cashflow, that found it on the side of the road wouldn't. I bought a single Milwaukee stepdrill on CL last week for $10. It wasn't in a package, but it had never been used.

I texted the guy, and we met about an hour later at the local gas-station/convenience store. Three minutes later, I was driving away with a new stepdrill. And believe it or not, he never pulled a gun on me or hijacked my truck.

 

[a52-830]

Re: Snap on ratchet ? $20.00

I texted the guy, and we met about an hour later at the local gas-station/convenience store. Three minutes later, I was driving away with a new stepdrill. And believe it or not, he never pulled a gun on me or hijacked my truck.

meeting in a pubic place is a great idea. cuts down on the exposure for both parties. the buyer isn't the only one who might get robbed.

some police stations have "craigslist exchange areas" in the station parking lot. they have a camera pointed right at it, in case there is ever a question . . . . . and they are right there.

 

[S4cruiser]

I'm not a snap on guy but this seems like a good deal ?!?

http://raleigh.craigslist.org/tls/5777277382.html

 

[72highboy]

I'm not a snap on guy but this seems like a good deal ?!?

http://raleigh.craigslist.org/tls/5777277382.html

Those look reeally clean..I have the same bottom box, looks like a pretty good deal

Cheers

Sent from my Nexus 6P using Tapatalk

 

[a52-830]

I'm not a snap on guy but this seems like a good deal ?!?

http://raleigh.craigslist.org/tls/5777277382.html

those are awesome boxes. i have a kr555/550 (9 drawer bottom), a kr555/550 (8 drawer bottom), and i just picked up a kr655/650 (all roller bearing slides, my top also has a gas shock, rather than the older style chromed arms), all different generations of the same box. the first two are pretty full, since the shallow drawers encourage laying your tools out flat rather than standing them in racks on their sides, but finding things is really easy when they are all laid out like that.

900$ might seem like a lot, but for the condition it is in, it likely isn't. it would be interesting to see how long it lasts, assuming you dont get it. if you are tempted, you can always offer, say, 750$ and see what he does. assuming the drawers all open and close without issue, and from the condition i would assume it would, that would be a deal to be proud of.

 

[FJ 432]

Wish I was closer:

http://albuquerque.craigslist.org/tls/5754745599.html

 

[a52-830]

all around boston . . . .


"Excellent condition Kennedy #526, 8 drawer machinist tool box made & badged for Craftsman."

http://boston.craigslist.org/nwb/tls/5778395157.html

"Kennedy tool box K-20"

http://boston.craigslist.org/bmw/tls/5736140539.html

huot tool box.

http://boston.craigslist.org/sob/tls/5745701964.html

 

[PFSard]

MAC TOOLS TOOL BOX - $50 (SCOTTSDALE)
http://phoenix.craigslist.org/evl/tls/5785175373.html

MAC TOOLS 6 DRAWER ROLL AWAY 34" TALL x 18" X 26"
DENNIS

 

[macgee]

MAC TOOLS TOOL BOX - $50 (SCOTTSDALE)
http://phoenix.craigslist.org/evl/tls/5785175373.html

MAC TOOLS 6 DRAWER ROLL AWAY 34" TALL x 18" X 26"
DENNIS

That is definitely worthy of posting here in this thread. Nice job and nice deal!

Somebody hurry up and grab that, it won't last long. He has his number posted.

 

[Shiftless]

That is definitely worthy of posting here in this thread. Nice job and nice deal!

Somebody hurry up and grab that, it won't last long. He has his number posted.

macgee has called it right again. That is a killer deal. I am amazed that the ad is still up. Personally I would pick it up at double that price even though I don't need it. Nice find PFS

 

[macgee]

20-330 DELTA 5" X 6" HORIZONTAL BAND SAW, Los Angeles: $75

The ad:
"This is a smaller delta older bandsaw
64 1/2 band saw in good working shape
Cosmetically not the best cord has a spline joint has no effect on performance I have a few other saws and hardly ever use this one and my space is limited reason for selling $75 firm Los Angeles"


http://losangeles.craigslist.org/lac/tls/5785476183.html

 

[macgee]

MILWAUKEE HEAVY DUTY 1/2" HOLE HAWG - $75 (North Hollywood)

Take him up on giving him your best offer:

Model 1675-1 - Works great, comes with case - Bits not included

$75 OBO

http://losangeles.craigslist.org/sfv/tls/5785241668.html

 

[creativecars]

I sure wish this was closer to me, but here it is...
Blacksmith Anvil Vise (tiffin area)
Anvil Vise ,,use in blacksmith shop or metal shop...$65.00 no spam
http://limaohio.craigslist.org/bar/5792125618.html

 

[Shiftless]

I sure wish this was closer to me, but here it is...
Blacksmith Anvil Vise (tiffin area)
Anvil Vise ,,use in blacksmith shop or metal shop...$65.00 no spam
http://limaohio.craigslist.org/bar/5792125618.html

Not a very good anvil and not a very good vise, but as a curiosity piece I would pick it up at that price if it was nearby.

 

[66Charger67]

For you Blackhawk toolbox fans.

Assorted tools and tool Box - $145 (Palm Coast) {North of Daytona}

http://daytona.craigslist.org/tls/5758379455.html

 

[bennymic]

Flare and swedge kit - $35 Springfield VA

Imperial eastman set that is ~$90 on amazon.

 

[84scrambler]

http://sfbay.craigslist.org/sby/tls/5786720800.html

I have a similar one but this one has the light on the side which makes it even nicer. I'm thinking about getting it, just a little to lazy to drive that far and pick it up..

 

[Indexmill]

Re: Found a deal on craigslist? - Aluminum Workmate

Aluminum Workmate $25.00!!

Denton, NC. Near Asheboro between Raleigh and Charllotte.

http://winstonsalem.craigslist.org/tls/5767077313.html

 

[Shiftless]

snappy rollaway kra 378 for $300 in SF Bay Area needs paint

http://sfbay.craigslist.org/eby/tls/5804103195.html

 

[larryq]

snappy rollaway kra 378 for $300 in SF Bay Area needs paint

http://sfbay.craigslist.org/eby/tls/5804103195.html

Nice find, sure to go quick with that stainless top and in good working condition (no rust, but could use some paint)

 

[bubinga]

Snap on is nice

Sent from my MotoG3 using Tapatalk

 

[larryq]

Interesting Walker-Turner grinder in Redwood City Ca for $50:

http://sfbay.craigslist.org/pen/tls/5805288087.html

 

[TinyGarage]

Snap on black knight box top & bottom and side locker, I'm new here but this looks like a good deal to me, I'm only in the market for a smaller home box or I'd get this one.

Limited Edition Snap - on Tool Box 30" deep monster ! - $2200
http://tampa.craigslist.org/pnl/tls/5809938444.html

 

[84scrambler]

That looks like a pretty good deal especially being a KRL..I would be tempted if it was local to me..

Snap on black knight box top & bottom and side locker, I'm new here but this looks like a good deal to me, I'm only in the market for a smaller home box or I'd get this one.

Limited Edition Snap - on Tool Box 30" deep monster ! - $2200
http://tampa.craigslist.org/pnl/tls/5809938444.html

 

[bubinga]

Nice vise, $50.00
Pittsburg Craigslist
http://pittsburgh.craigslist.org/tls/5818178091.html


Sent from my MotoG3 using Tapatalk

 

[texasfiremedic]

Anybody living in the DFW area needing a lot air on the move this is a great deal.

https://dallas.craigslist.org/dal/for/5813140419.html

 

[larryq]

Mac 7 drawer box for $200 in San Francisco. Hard to believe this is still listed?

http://sfbay.craigslist.org/sfc/tls/5827657069.html

 

[larryq]

Old school standing Craftsman drill press for $125 in Livermore CA:

http://sfbay.craigslist.org/eby/tls/5830726716.html

 

[larryq]

A very nice shape Wissota grinder for sale in Los Altos, CA. $150, made in USA:

http://sfbay.craigslist.org/pen/tls/5830298790.html

 

[Shiftless]

Why do all the good deals pop up when I am out of town hundreds of miles away?

 

[bubinga]

https://pittsburgh.craigslist.org/tls/5831871902.html
Disk sander, craftsman, $60.00


Sent from my MotoG3 using Tapatalk

 

[bubinga]

https://pittsburgh.craigslist.org/tls/5831871902.html
Disk sander, craftsman, $60.00


Sent from my MotoG3 using Tapatalk

It's still there, I'm surprised.
I have one, it's a nice sander.


Sent from my MotoG3 using Tapatalk

 

[bubinga]

Vintage Sears Industrial Power Hacksaw
$200(Gibsonia)





https://pittsburgh.craigslist.org/tls/5841661471.html
Thought this was pretty cool.




Sent from my MotoG3 using Tapatalk

 

[Shiftless]

bubinga:
Cool old tool you found there. Chop saws have made them obsolete of course, but they are still really cool.
Here is a similar one I found online and better yet, here is a link to watching and hearing it cut through a solid steel rod.
Gotta love the big flywheel on this saw!

 

[bubinga]

bubinga:
Cool old tool you found there. Chop saws have made them obsolete of course, but they are still really cool.
Here is a similar one I found online and better yet, here is a link to watching and hearing it cut through a solid steel rod.
Gotta love the big flywheel on this saw!

Cool, I think that's like the one I have, with its own legs.
I haven't done anything with it yet, but seeing that one, I may set it up. It needs restored too.

Sent from my MotoG3 using Tapatalk

 

[MissileBear]

Never seen a grinder from this company, but I recognize the style.

http://rochester.craigslist.org/grd/5840729297.html

"This vintage Diehl 6" bench grinder works great. I think it was manufactured in the 1940s or 1950s? by the Diehl MFG. CO. Witch was a division of the Singer MFG. CO. This is a high guilty 1/4 HP machine (like most things were back in the day when they made things to last a life time). You can see by the pics its in real good condition for its age. It measures 12 1/2" long x 11'' tall x 8" wide. It weighs 37.5 pounds. And has a 6 1/2' long power cord. Just a real nice old vintage bench grinder for your shop or for your man cave, if your a vintage tool collector. If interested please call or text me at show contact info Asking $45.00 or B.O. Thanks. "

Looks like it was hardly used.

 

[84scrambler]

http://sfbay.craigslist.org/sby/tls/5842913500.html

 

[sgs236]

Region: East

Location: Pittsburgh

Item: Torches with tanks

Price: 40.00

Link: http://pittsburgh.craigslist.org/tls/5843885692.html

Small tanks, but the torch, gauges, hose, and cart are worth more then 40.

 

[bubinga]

Metal cutting bandsaw$100(Dayton, PA)

https://pittsburgh.craigslist.org/tls/5844496652.html


Sent from my MotoG3 using Tapatalk

 

[bubinga]

How much is one of those little A/C tanks to exchange for a full one?

Sent from my MotoG3 using Tapatalk