Found a deal on craigslist? - List Here!

[pcmeiners]

"Lots of Vidmar style (90% sure they are Vidmar) cabinets in Livingston, LA (about 20-30 minutes from Baton Rouge, depending on where you are). $350 each, and they do charge tax."

Great deal, especially in a metro area. No way were they sitting in Catrina's salt water, expanded rust would show on the bottom seam. Like you I like the smaller height drawers.

 

[SRX]

May not be cheap, but really beefy.

https://worcester.craigslist.org/for/d/heavy-duty-workbench/6664947288.html

$150
Charlton, MA

"The bench is made of 12 gauge steel and is VERY heavy. It measures 28" deep x 72" long x 33" high with a 10" deep x 36" high upper cabinet."

 

[Indexmill]

1971 Snap On Toolbox bottom in excellent original condition; 7 drawers . $450.

https://raleigh.craigslist.org/tls/d/snap-on-tool-box/6669857286.html

"have a very nice and clean Snap On tool box for sale with no dents new paint , good drawers some has tools in it just don't need it anymore $ 450.00 contact Ed at 919 427 4424"

 

[Bartleby]

Wilton Chicago bullet vise in SF Bay Area - Windsor CA. Looks like 3"-3.5"

$100

https://sfbay.craigslist.org/nby/tls/d/wilton-torpedo-vise/6673775749.html


It's way too far for me to go.

 

[larryq]

May not be cheap, but really beefy.

https://worcester.craigslist.org/for/d/heavy-duty-workbench/6664947288.html

$150
Charlton, MA

"The bench is made of 12 gauge steel and is VERY heavy. It measures 28" deep x 72" long x 33" high with a 10" deep x 36" high upper cabinet."

Imagine trying to transport that thing...I wonder if the top cabinet disassembles easily, sure would be nice in someone's workshop.

 

[larryq]

Very interesting toolbox with some vintage tools in it-- including a couple of Proto ratchets. Toolbox is an 'Aztec', which is a pretty solid brand I believe.

What would be even nicer is if the vise on top is included, as it's a Wilton. Not sure if it is part of the deal however. $50, in Hayward CA:

https://sfbay.craigslist.org/eby/tls/d/tools-and-toolbox/6672332260.html

 

[larryq]

Lyon mid-chest for $40 in Atascadero CA. Probably same manufacturer as Matco, based on the look and the handle style:

https://slo.craigslist.org/tls/d/nice-lyon-3-drawer-tool-chest/6672737948.html

 

[ProGun3400]

I purchased a Craftsman block on original stand from this fellow a few weeks ago. I spotted this ($75) 1/2 HP Craftsman grinder in his shop. I didn't see it run but it looked clean, that stand it's mounted to is solid and on wheels. A very nice fellow to deal with that also had some machining tools available for sale as well.

https://chicago.craigslist.org/nwc/tls/d/craftsman-grinder-on-cart/6668660870.html

 

[JimNC]

Bonney 3/4” ratchet and sockets.

I don’t know if $75 is a reasonable number, it’s been posted for a while I think.

https://winstonsalem.craigslist.org/tls/d/vintage-bonney-3-4-inch-4292/6667196511.html

 

[larryq]

I purchased a Craftsman block on original stand from this fellow a few weeks ago. I spotted this ($75) 1/2 HP Craftsman grinder in his shop. I didn't see it run but it looked clean, that stand it's mounted to is solid and on wheels. A very nice fellow to deal with that also had some machining tools available for sale as well.

https://chicago.craigslist.org/nwc/tls/d/craftsman-grinder-on-cart/6668660870.html

6.2 Amps-- that's one powerful grinder. Looks like a really good deal at $75, no question.

 

[larryq]

Could do worse than this Waterloo box for $50 in San Ramon CA. Check to see if it's from the 1970s-early 80s, with the tangs on the drawer slides that lift easily for quick removal.

If it's a later box and you have to press in a tab with a screwdriver, like on the cheap craftsman boxes, maybe not such a great deal:

https://sfbay.craigslist.org/eby/tls/d/waterloo-tool-box/6674081633.html

 

[larryq]

1/3 HP block grinder with stand near Chico CA for $35:

https://chico.craigslist.org/tls/d/craftsman-standing-grinder/6674571814.html

 

[cdeer001]

Fastener Merchandiser Drawer System (Washington DC area??)

https://washingtondc.craigslist.org/nva/tls/d/fastener-merchandiser-drawer/6652829330.html

Fastener Merchandiser Drawer System just like you see in hardware stores, pull out trays with individual compartments for the fastener assortment. Priced $22.00 per 3 tray cubicle and includes the fasteners many of which are poly bagged. The fasteners alone are worth more than the asking price! Tray labels describe contents accurately. Buy the whole set of 21 cubicles for $400.00

I have lots of other stuff of interest to businesses, woodworkers, contractors some used, some new. Things like screws, bolts, collated nails, cabinet hardware, electric and air power tools, Machinery, store equipment, hardwoods and veneers, lighting, electrical, plumbing etc. Come check it out, there's something for everyone.

 

[larryq]

Nice looking Kennedy roller 3-drawer for $50 in Stockton CA:

https://stockton.craigslist.org/tls/d/tool-box-rolling-3-drawer/6666763522.html

 

[a52-830]

something missing in your life? looking for something that speaks to your soul?

if you live around Boston . . . . .


https://www.facebook.com/marketplace/item/421775534977267

1979 Suzuki Gs1000l
Salem, MA · over a week ago ·
$360
About This Vehicle:
Driven 93,000 miles
Seller's Description:
Not running currently. Comes with all components ( I have side panels ) bike needs a battery and clean carbs to start. I have the title and keys. Clutch shifts, has both brakes. Displays super clean. Seats ripped. If you’re interested in a parts/flip message me.

 

[Ole Slewfoot]

Sf bay area, free Lyon roller
https://sfbay.craigslist.org/sfc/zip/d/heavy-duty-metal-tool-cabinet/6677051402.html
Gogogo

 

[ProGun3400]

It looks like a power hacksaw.

I concur, it's a power hacksaw.....

 

[OneOfEm]

Pensacola, FL

Rockwell 20" Bandsaw - $250

(Seller says that it has both pulleys for wood/metal. It's in better shape than the pictures might indicate. I was looking at another item the seller has and looked over the bandsaw while I was there.)

 

[MercLSU]

Pensacola, FL

Rockwell 20" Bandsaw - $250

(Seller says that it has both pulleys for wood/metal. It's in better shape than the pictures might indicate. I was looking at another item the seller has and looked over the bandsaw while I was there.)

)(&*)(#@&$(#&@$ I wish I was closer or I'd be all over that one. Nice find for somebody if the reeves drive is intact and functional.

 

[bubinga]

Pensacola, FL

Rockwell 20" Bandsaw - $250

(Seller says that it has both pulleys for wood/metal. It's in better shape than the pictures might indicate. I was looking at another item the seller has and looked over the bandsaw while I was there.)

)(&*)(#@&$(#&@$ I wish I was closer or I'd be all over that one. Nice find for somebody if the reeves drive is intact and functional.

Wow, be all over that if it were local!

Sent from my MotoG3 using Tapatalk

 

[bubinga]

Wow, be all over that if it were local!

Sent from my MotoG3 using Tapatalk

Great price too of course!

Sent from my MotoG3 using Tapatalk

 

[sgs236]

Region: East

Location: Pittsburgh

Item: Miscellaneous electronic components

Price: Free

Link: https://pittsburgh.craigslist.org/zip/d/miscellaneous-electronic/6678189951.html

 

[cdeer001]

Bench Grinder - $45 (Vienna, VA)
https://washingtondc.craigslist.org/nva/tls/d/bench-grinder/6675883685.html

 

[corn]

Location:Round Top Texas - about halfway between Austin and Houston

Item: Boice Crane 12" Planer

Price: $550 - I don't know if its a good deal or not but I thought ya'll might be interested.


https://austin.craigslist.org/tls/d/boice-crane-12-planer/6672779197.html

 

[a52-830]

Commercial grade metal cabinet.
Nashua, NH · 57 minutes ago ·
$125
Commercial grade metal cabinet. Outside could use a paint job but so much storage for your garage. One drawer has dividers for screw. Need two people to move. First come. 59 t
28 d
38 w Less



https://www.facebook.com/marketplace/item/696130764092546

 

[Shiftless]

Nice find a52!
Somebody grab that...it’s a smoking hot deal!

 

[a52-830]

Old craftsman utility cut
Merrimac, MA · 7 hours ago ·
$54
Vintage craftsman utility cart




https://www.facebook.com/marketplace/item/2112827178973771

 

[JimNC]

If I was just closer. 12” table saw, lathe, panel saw (router?) all need unknown work, but that’s the fun.

https://raleigh.craigslist.org/tls/d/saw-lathe-drill-press-joiner/6679921512.html

 

[red]

Drill Press for sale in Suffern, NY, no price listed, but it's been on Craigslist for 26days . . .

http://https://hudsonvalley.craigslist.org/mat/d/drill-press-for-sale/6659139052.html

 

[bubinga]

If I was just closer. 12” table saw, lathe, panel saw (router?) all need unknown work, but that’s the fun.

https://raleigh.craigslist.org/tls/d/saw-lathe-drill-press-joiner/6679921512.html

Wow!! The Table saw is a monster!
Looks Like a Delta Too!
Looks Like an 8" jointer too!
Good Deal/steal for someone.

 

[macgee]

Drill Press for sale in Suffern, NY, no price listed, but it's been on Craigslist for 26days . . .

http://https://hudsonvalley.craigslist.org/mat/d/drill-press-for-sale/6659139052.html

Wow!! The Table saw is a monster!
Looks Like a Delta Too!
Looks Like an 8" jointer too!
Good Deal/steal for someone.

That could be a great deal, The Delta Table Saw is a massive 14" blade Model: 34-395 and the lathe is a Powermatic model #45 wood lathe with variable speed, both are great pieces when working and when all parts are present. The panel router saw can also possibly be very useful.

Smoking deal for someone who has the space and wants to set up a wood shop. You'll most likely need three phase for the table saw.

 

[bubinga]

That could be a great deal, The Delta Table Saw is a massive 14" blade Model: 34-395 and the lathe is a Powermatic model #45 wood lathe with variable speed, both are great pieces when working and when all parts are present. The panel router saw can also possibly be very useful.

Smoking deal for someone who has the space and wants to set up a wood shop. You'll most likely need three phase for the table saw.

Yes probably 3 phase.
Yes, the lathe is very nice.
Does the lathe feature a reeves drive?

Sent from my MotoG3 using Tapatalk

 

[Jarcese]

https://boston.craigslist.org/nwb/tls/d/2-lathes-plus-tools-etc-one/6682629359.html

Seems like a sweet deal

Sent from my SM-G930P using Tapatalk

 

[hippobeast]

These may be too expensive based on condition but one is huge.

https://columbus.craigslist.org/tls/d/large-wilton-vises/6673086199.html

Columbus, Ohio Wilton Vises. Please post restoration pics

 

[Shiftless]

These may be too expensive based on condition but one is huge.

https://columbus.craigslist.org/tls/d/large-wilton-vises/6673086199.html

Columbus, Ohio Wilton Vises. Please post restoration pics

You’re right on the too expensive part.
With all that surface rust, I would be concerned with the close tolerance slide and barrel.
The one in the back is no doubt a Wilton 600 but the swivel base might be missing. That would make it a 600N. 6 inch wide jaws.
The other ones seem smaller maybe 450s or 500s.

 

[JimNC]

That could be a great deal, The Delta Table Saw is a massive 14" blade Model: 34-395 and the lathe is a Powermatic model #45 wood lathe with variable speed, both are great pieces when working and when all parts are present. The panel router saw can also possibly be very useful.

Smoking deal for someone who has the space and wants to set up a wood shop. You'll most likely need three phase for the table saw.

Macgee, I tried to post pics and failed. How did you get the address for each pic from CL?

 

[a52-830]

i "control click" on the image, select "open in new tab", and copy the URL from there.

 

[larryq]

Something seems odd here. Free delta / rockwell table saw and jointer with drill press in Oakland CA. Been sitting for a couple of days, which is unheard of. All in working order per the ad:

"I'm getting rid of a vintage Delta Rockwell table saw. It's in working order. It comes with a jointer attachment and the drill press attachment. It was given to me for free on the condition that I do the same once done with it.
"

https://sfbay.craigslist.org/eby/tls/d/free-delta-rockwell-table-saw/6681609688.html

 

[cdeer001]

Craftsman Joiner - $80 (Vienna, VA)

https://washingtondc.craigslist.org/nva/tls/d/craftsman-joiner/6680339358.html

 

[macgee]

Kennedy Roll Away with Middle Box - $75 (Palmdale, CA)

Not a fan of these but the price is right and could be useful for someone, especially the middle box.

https://losangeles.craigslist.org/ant/tls/d/kennedy-rool-away-with-top-box/6684207935.html