Free Tapcon Sample Kit

[torqueman2002]

Got mine today. Pretty nice kit!! Even has a drill-bit in it.

Thanks OP & thanks Tapcon!

Same here.

Yes! Thanks a bunch.

 

[Brick_Smart]

Thanks OP!

Mine showed up yesterday, as others have mentioned this is a generous sample pack and now I have an excuse to buy a hammer drill!!!

 

[captain14]

Thanks OP!

Mine showed up yesterday, as others have mentioned this is a generous sample pack and now I have an excuse to buy a hammer drill!!!

You have been here for only two months and YOU UNDERSTAND the rules.

Get something free, now you have to get something to go with it.

 

[boiler7904]

Me too, Said it was coming from Iron Mountain Fulfillment.

Yep that is what mine said as well. It must be it then.

Mine came yesterday - Iron Mountain did the fulfillment on this promo for ITW / Tapcon.

Got mine today. Pretty nice kit!! Even has a drill-bit in it.

Thanks OP & thanks Tapcon!

Drill bit in mine was for an SDS plus rotary hammer drill - not sure if they all are going to be that style or not.

You have been here for only two months and YOU UNDERSTAND the rules.

Get something free, now you have to get something to go with it.

Even better when the tool companies have promos going on and you can get a nice Bosch drill for $50 off $200 at most online vendors. Dewalt is $20 off $100 too.

 

[kf4zht]

Mine came yesterday - Iron Mountain did the fulfillment on this promo for ITW / Tapcon.

Ah, I was searching through my email to figure out what order had shipped UPS and couldn't find anything. That explains it and I have one waiting on me at home.

 

[wood02]

Thanks, OP.

 

[chrisexv6]

Thanks OP!

Mine showed up yesterday, as others have mentioned this is a generous sample pack and now I have an excuse to buy a hammer drill!!!

I can use this with the Milwaukee rotary drill I got for a penny

 

[Fishplate]

Did anyone get a confirmation via email that their form were being process?

Nope, and I couldn't remember if I had done it, so yesterday morning I filled out the form. Guess what came yesterday afternoon?

If I get another one, I'll give it to the maintenance guys.

 

[ford33]

Received the sample kit on Monday. I didn't realize Tapcon made the larger diameter fasteners. I use Tapcon for most of my concrete fastening and like them. This promotion introduced me to products I didn't know they made. It is a good promotion for them.

 

[captain14]

Mine came today.

Contents in included were
12. 3" 5/16 screw anchors
2. 4" 3/8 Screw anchors
1. 6". 1/2. Screw anchor

1. 1/4. 7". drill bit. SDS for 5/16 anchors

Thanks OP

Thanks Tapcon and Iron Mountain .

 

[bobbycos]

Filled out the form

 

[EdJack]

Extremely nice Tapcon set! Mine just arrived. Thanks OP. Everyone should jump on this!

 

[Spn1025]

Got my Tapcon kit. Wish I could post a pic, but every time I select the picture it just kicks me out of Safari (iPhone 6 plus)

The drill bit alone is probably a $5 value

 

[Spn1025]

On the sample package, there is also a survey to take where you can win a Ramset Cobra+ Powder Actuated Tool and a Paslode Compact Nailer.

I shouldn't be telling you guys this... Makes my odds worse

 

[EdJack]

Here's the kit:

 

[drwheels]

Thanks op Thanks Tapcon

 

[markbinwi]

Got mine today, very nice little group and great bit too! Thanks to OP and Tapcon! I use these all the time, they are the best way to anchor in concrete IMO

 

[PFSard]

Mine arrived. Pretty incredible sample package. Thanks OP.

 

[southalabama]

Got mine today. Thanks to op.

Comes at a good time. I'd been putting off drilling into concrete.

 

[bczygan]

Iron Mountain sent me 2 of the intro kits!!!

I've got an SDS hammer drill. Have additional drills.

Now I just need to figure out something to hang.

How about Snap-On wall cabinets on my brick walled garage?

Or some pegboard?

Or some steel panels that hold Ames parts trays?


YES!

Bill

 

[NUTTSGT]

When did they change the tip of the tapcon ?

 

[stanratch]

thanks OP got mine today.
I'm surprised it contains as much as it does

 

[cadavjo]

Ha, got my kit today and I'm shocked. I got the pack everyone else has described, but I got 8 packs!

I would have snapped a picture for proof, but I just figured that's what everyone got. They are out at the farm, now. Rebuilding the original barn, so these will be nice for fastening the still.

Big thanks to op and to tapcon!

 

[The Cobbler]

When did they change the tip of the tapcon ?

I was wondering that too, I've only seen pointed tips in the past, not the blunt tip as showing here.

 

[NUTTSGT]

I was wondering that too, I've only seen pointed tips in the past, not the blunt tip as showing here.

Glad to see I'm not the only one.

I was wonder if they did this as to keep the fasteners from bottoming out (hole not deep enough) and breaking the heads off.

 

[rsanter]

Got mine today. Damn nice sample set

Bob

 

[captain14]

When did they change the tip of the tapcon ?

Is this just the SDS bits? All the smler sizes I have used have the regular tip.

Can this bit in the package be used in a regular hammer drill or does it need the SDS style drill chuck?

The smaller screws will work well in the new threshhold I have to install in the garage.

 

[elronin]

Got mine

Oh the pointed tips are on the smaller sizes the large one are blunt

 

[chrisexv6]

Is this just the SDS bits? All the smler sizes I have used have the regular tip.

Can this bit in the package be used in a regular hammer drill or does it need the SDS style drill chuck?

The smaller screws will work well in the new threshhold I have to install in the garage.

I think they are talking about the pointed ti on the Tapcon screw itself.

But I agree - Ive never used Tapcons this big, so maybe the flat tip is normal for them? All the small ones Ive used (and bought in the last couple months) have a pointed tip.

 

[cadavjo]

 

[The Cobbler]

Picked mine up last night from my buddies. nice samples for sure.
figured with respect to the pointed vs blunt tips: the blunt tips are for 5/16 & larger diameter, the pointed tips aer for 1/4 & 3/16 sizes.

 

[foster025]

Got an e-mail from Tapcon that they're do a $100 product giveaway for filling out a survey. Three winners will be chosen and posted to their Facebook page.

If you're interested:

http://surveys.verticalresponse.com/i/show/1887399/c4a84ef529/593360183/7b5a4d3fad/b62741bbca

 

[cagullett1]

Fill it out multiple times or have them sent to multiple addresses?

 

[cadavjo]

Fill it out multiple times or have them sent to multiple addresses?

That was one sign-up.

 

[NUTTSGT]

The big brown truck dropped mine off today.

I know I'll use the 5/16" tapcons, maybe the 3/8" version but the 1/2" Tapcon ? Maybe as a coat hook ?

 

[Mr. Fixer Upper]

Thanks OP.. got mine today

 

[4x4_G30_Sportvan]

Rec'd me set today, just like earlier posters mentioned.

Says 'Available at Lowes.' inside package.

 

[lightning02]

got mine today to.

 

[stanleyrleonard]

Got mine--many thanks OP!

 

[Burgerkong]

Not expecting it, but I ended up getting a pack too way up in Canadeh!