To avoid these ads, REGISTER NOW!

Garage Stereo Systems

KerryH

Well-known member
Joined
Jun 23, 2013
Messages
113
Location
Ga
I had some old computer parts laying around so I built a spare computer to put out in the shop. It runs Pandora mostly, but is great for youtube videos, research and service manuals.

It is connected to a small T-amp called a TA2024 seen here (about the size of a box of playing cards). I used a small plastic container as an enclosure and hooked it up to some old bookshelf speakers I had. I wired in a potentiometer and installed it on the wall to offer easy remote volume control. All in all it works great, can go much louder than I need and sounds very good.

The audio portion is very budget friendly and low power.
 
To avoid these ads, REGISTER NOW!

JKcrawler

Well-known member
Joined
Mar 14, 2012
Messages
73
Lisiecki1:
The cafe is a 79 CB650 that's been bored out 40cc
nu8e3a4e.jpg


Nine4gmc:
I work for a general contractor so all of the cabinets and tops are "trash"from demolition when we start renovations. The wall cabinets are just normal office style millworker cabinets.

The floor cabinets however are heavy gauge powdered coated steel lab cabinets. These thing are badass with heavy duty drawer casters. They were literally a couple years old and in perfect condition.
6anezapu.jpg
 

lisiecki1

Well-known member
Joined
Feb 6, 2013
Messages
742
Location
SE Texas
Lisiecki1:
The cafe is a 79 CB650 that's been bored out 40cc
nu8e3a4e.jpg


Nine4gmc:
I work for a general contractor so all of the cabinets and tops are "trash"from demolition when we start renovations. The wall cabinets are just normal office style millworker cabinets.

The floor cabinets however are heavy gauge powdered coated steel lab cabinets. These thing are badass with heavy duty drawer casters. They were literally a couple years old and in perfect condition.
6anezapu.jpg

VERY cool. Thanks!
 

prowler777

Well-known member
Joined
Jul 8, 2010
Messages
277
Location
Surprise,Az.
i have a pioneer reciever with yamaha speakers.it will shake the neighbors walls if i wanted it too,but i don't do that....lol
 

FltEngCPO

Well-known member
Joined
Mar 25, 2011
Messages
156
Location
Moore, Oklahoma
All my stuff is remants of home system upgrades with only a few exceptions. I have a 10 year old 100W stereo receiver temporarily sitting on my mini fridge in the main shop area with two small Bose 161 bookshelf speakers that used to be in the house before I added in-ceiling surround that are sitting up on the floor in what will be the 12'x16' mancave (poker table) room. I did get four Polk in-ceiling speakers on clearance ($29 each) that will go up there when it is finished and I have a TV up there. Then the two 161's will be mounted somewhere in the shop area. I also might add a Bolo BAR-II ($69) or BAR-III ($129) bluetooth reciever adapter so I can stream my iTunes/iPhone/iPad music to the system.
 

Stevie-Ray

Well-known member
Joined
Jul 23, 2013
Messages
2,894
Location
Michigan's Sunrise Side
This is me for now. On that buffet to the left of the small OH door is an old Pioneer VSX-501 Dolby Pro-logic receiver. (Yeah, it's THAT old) Since I don't currently watch TV in the garage, (yet) it's perfect for my listening pleasure. The speakers are Pioneer 10" 3-ways in front and small Pioneer bookshelfs in rear. I currently have 2 other Pioneer receivers, a 5.1 surround in the family room, which is old enough to have been called AC-3, coupled with a Boston Acoustics speaker system, and a 7.1 surround in the theatre, coupled with 3 Bose systems. All receivers at least 100W/channel. I'll probably buy Pioneer again when any of the above goes **** up. Spectacular service life. If I decide to go full tilt on a sound system for the garage due to a large TV, I also have a Cerwin Vega speaker system that would be perfect.;)

DSC_0093_zps13fad6f4.jpg
 

JetLinkin

Well-known member
Joined
Sep 28, 2010
Messages
319
Location
FL 370, a.k.a. Houston Texas
I use a Netgear wifi extender to get the house wifi out to the detached garage. Then I stream media (usually Pandora Radio) through a Sony Network Media Player. Speaker is a Polk Audio sound bar with wireless subwoofer. Control the whole thing through my iphone. This stuff wasn't getting much use in the house, so I repurposed it for use out in the garage.
 

Attachments

  • 024.jpg
    024.jpg
    142 KB · Views: 119
  • 016.jpg
    016.jpg
    136.7 KB · Views: 114
  • 021.jpg
    021.jpg
    141.8 KB · Views: 113
  • 015.jpg
    015.jpg
    142.8 KB · Views: 122

jmgreen7

Member
Joined
Aug 22, 2013
Messages
24
I have speakers run to a sonos system in an adjacent room. If you have a lot of digital music, it is the way to go. I've had the system for about 6 years and it has been a fantastic investment.
http://sonos.com
 

JRay

Well-known member
Joined
Aug 4, 2012
Messages
56
Location
Nashville, TN
I used to sing in a gospel group with my dad. We don't do much singing anymore, but the equipment takes care of my garage audio needs. Also, works great for an impromptu garage band or karaoke extravaganza. Yamaha 8 channel head and 15" Peaveys.

"we're getting the band back together"

https://sphotos-a-ord.**.fbcdn.net/hphotos-ash3/1238037_10151663449339818_54512535_n.jpghttps://sphotos-a-ord.**.fbcdn.net/hphotos-prn2/1150134_10151663449344818_1598954597_n.jpg
 

BellyUpFish

Well-known member
Joined
Jun 24, 2012
Messages
2,942
Location
Alabama
All you "check out my truck grill speaker mount" inspired me.

I'm currently restoring a '66 Bronco, so I thought it was only fitting I find a Bronco grill.

Mission accomplished.

4edy7y3e.jpg
 

cnc-me

Well-known member
Joined
Jan 6, 2010
Messages
1,183
Location
MI
It's an old computer (500 Mhz) that runs DOS and MPX Play.
DOS boots from a 16 gig compact flash card, you can see it sticking out in front. Very easy to add more music with the CF card.
Start up to playing music is around 20 seconds.
Shutdown is almost instant, and it "remembers" the last song and position
it was playing. Been using this rig for around 7 years now, but this is the
first time it has looked half-way decent. Only problem I have had is the
high frequency from my TIG welder knocks out the LCD display.
After a re-boot all is fine though.



Not a very good picture of the keypad.


The Sanyo speakers are 27 years old and made in the USA!


I sawed about 7" off the back of the computer case since
the drive bays are no longer needed.
Just painted the old case with a rattle can and a little Bondo
to fill in some "undesired features".
 

JRay

Well-known member
Joined
Aug 4, 2012
Messages
56
Location
Nashville, TN
Awesome set up. Its the creative guys like you on this forum that make me feel like an idiot on a daily basis. I wish I could throw stuff like that together. Neat stuff man.

It's an old computer (500 Mhz) that runs DOS and MPX Play.
DOS boots from a 16 gig compact flash card, you can see it sticking out in front. Very easy to add more music with the CF card.
Start up to playing music is around 20 seconds.
Shutdown is almost instant, and it "remembers" the last song and position
it was playing. Been using this rig for around 7 years now, but this is the
first time it has looked half-way decent. Only problem I have had is the
high frequency from my TIG welder knocks out the LCD display.
After a re-boot all is fine though.



Not a very good picture of the keypad.


The Sanyo speakers are 27 years old and made in the USA!


I sawed about 7" off the back of the computer case since
the drive bays are no longer needed.
Just painted the old case with a rattle can and a little Bondo
to fill in some "undesired features".
 

cnc-me

Well-known member
Joined
Jan 6, 2010
Messages
1,183
Location
MI
Awesome set up. Its the creative guys like you on this forum that make me feel like an idiot on a daily basis. I wish I could throw stuff like that together. Neat stuff man.

Thanks, glad you like it.
Keeps one old computer out of the dumpster.
 

NewShockerGuy

Well-known member
Joined
Oct 12, 2010
Messages
2,481
Location
Northern Virginia / DC
Mine

Just a little sony unit. Plays my ipod, radio, cd, any device hooked up to a 3.5m, jack.... Works great for garage environment where space is tighter.

-Nigel
 

Attachments

  • stero1.jpg
    stero1.jpg
    54.5 KB · Views: 96
  • stereo2.jpg
    stereo2.jpg
    58.6 KB · Views: 88

tribbles

Well-known member
Joined
Apr 23, 2012
Messages
290
Location
Las Cruces, NM
My wife's old late '80s-era boombox.

garageradio.jpg


The rubber bands are shot on both decks but I can still use a cassette adapter to pipe Pandora through it from my cell phone.

I'm still debating on building an enclosure for my dad's old Yamaha CR-820, one of these:

re_yamaha_cr820_s.jpg
 

transplant_wi

Well-known member
Joined
Jul 30, 2010
Messages
191
Location
Madison, WI
NewShockerGuy - what model is the stereo? It looks like just the thing I need. Would I be able to run something through it to play MP3s? Sorry if that's a silly question - I am electronics impaired.
 

48windsor

Well-known member
Joined
Jan 24, 2013
Messages
407
Location
Olympia ,Wa.
lol kbs224, Im up with that . Ive got an old ghetto blaster with a remote and some frebee speakers I will hook up. Nothing fancy just want some music while I work. Which half the time I get frustrated and turn off ,because too much blah blah blah.
 
To avoid these ads, REGISTER NOW!

indyokie

Well-known member
Joined
May 20, 2012
Messages
260
Location
Yukon, Oklahoma
This is my system, I'm 42 and still like the old school systems. Some of this I purchased new, some captured from eBay in past few years. The CD player was $ 35.00 and the tape deck $ 40.00 - it was new - just old.
1994 Denon Reciever
1990's 6 cassette Pioneer deck,
1990 Advent speakers ( rebuilt )
1985 BSR EQ
2012 - Rack mounted Power strip
1990's 100 disk CD
1990's center channel speaker I rarely use.

Next step is to get a Bluetooth link and/or a PC to stream the music in. Thanks for everyone showing how they have done that. Great ideas.
 

Attachments

  • Garage stereo.jpg
    Garage stereo.jpg
    138.9 KB · Views: 188
Last edited:

JerrySarcastic

New member
Joined
Dec 29, 2012
Messages
3
Location
Hawaii
I also have an old 70's receiver that I have pressed into service in my garage. I love it for the looks and the sound.

<img src="http://jerrysarcastic.files.wordpress.com/2013/08/photo.jpg" alt="" width="600" height="" border="" align="" />
 

kamesama980

Well-known member
Joined
Mar 28, 2013
Messages
471
Location
columbus, IN
Nothing fancy. my old imac (My effort to break out of the windows-only camp...only credit I'll give apple is that broken screen is the only damage after driving over it (in just a soft backpack) with my old S10) with a garage sale LCD monitor to a garage sale bookshelf stereo system. I'm surprised how loud it is and how nice the sound is for the volume. I haven't found max volume yet. Wifi reaches the garage and all my car manuals are accessible there too.

the computer's on the top of the workbench, the stereo and speakers are mounted to the wall. anyone shorter than me'll have a heck of a time changing tunes but that's not my problem.


Place is a mess...just moved in an an 8 month old to take care of = no time.
 
Last edited:

nine4gmc

Well-known member
Joined
Mar 24, 2012
Messages
14,357
Location
Dallas
kamesama980, you should post that two drawer Craftsman in our "show your crown top love" thread. :beer:
 

kamesama980

Well-known member
Joined
Mar 28, 2013
Messages
471
Location
columbus, IN
kamesama980, you should post that two drawer Craftsman in our "show your crown top love" thread. :beer:

No idea what you're talking about....I'll go try to find it. I love that box though, I think it was in my grampas basement. It's been dropped off my truck while moving, welded up the corners because the pinch welds were giving, and used to hold over 100lbs of tools.
 

Ohighway

Member
Joined
Aug 13, 2013
Messages
14
I run vintage equipment in my 30x40 garage. My main speakers consist of the top components from Klipschorns (mid and high horns/drivers and crossover) and utilize home made Altec A7 Voice of the Theater style bass bins with a 15" woofers. They're driven by a Fisher 500c tube receiver that is fed by a Sony CD changer.
 

cnc-me

Well-known member
Joined
Jan 6, 2010
Messages
1,183
Location
MI
This is an awesome thread. Some of you guys should check out the Parts Express TechTalk forum and the speaker designs that Parts Express publishes. Speaker building is not difficult and very rewarding! I've built several sets for the house, but i'm in the process of building Paul Carmody's "sprite" for some garage tunes.

http://techtalk.parts-express.com/showthread.php?234870-The-Sprite-self-contained-ND90-boombox

You mean like this:
The drivers come from Parts Express in 1988


 

phaser78

New member
Joined
Sep 4, 2013
Messages
2
I keep my collection of vintage receivers in the garage and hook them up depending on my mood. Currently running a classic MCS digital receiver, Sony cassette and a generic CD player thru some awesome 3-way Pioneer speakers with 10inch woofers. I have a 55wpc Sony Strv-55 receiver that I really like to push thru big Coral 3-way speakers when i'm cranking AC/DC. I live in the country so sound levels are not a problem. I also have a stereo on the back porch facing my pool: Craig receiver, NEC tuner, generic cd, Sanyo 3-way speakers.
 

torqueman2002

Well-known member
Joined
Jun 3, 2009
Messages
6,138
Location
SE Michigan
'Upgraded' old-school.
Yamaha receiver with Tape 1 Input for CD/DVD player, and Aux input for iPOD. Full size rebuilt original Advents speakers at ceiling level. Cassette tape is for player in '84 Vette.
GarageStereobP1030429.jpg


GarageStereocP1030430.jpg
 

rgodwin

New member
Joined
Oct 29, 2013
Messages
1
shopstereo1.jpg
[/URL][/IMG]
shopstereoII.jpg
[/URL][/IMG]Kenwood car stereo bluetooth/USB. Polk audio Marine 6.5s. Tripp-Lite PR-12 power supply. Just finished the stereo. Will soon add some 12v Led lighting and possilby a small amp and larger power supply if necessary. Any ideas or suggestions would be appreciated. Thanks
 
Last edited:

KaHuNaZ

Well-known member
Joined
Apr 6, 2013
Messages
298
Location
Corpus Christi, TX
Finished my husky toolbox boombox. It turned out pretty nice. I still need to add an external power switch and pick up a battery/charger to make it completely portable.
bhbg.jpg
I also entered it into a Ryobi contest. If you like it, feel free to send some votes my way. You can vote once a day every day until the end of the month. Thanks! https://www.ryobitools.com/nation/projects/1767
 

KaHuNaZ

Well-known member
Joined
Apr 6, 2013
Messages
298
Location
Corpus Christi, TX
details? Looks great!!

Thanks. I used a husky 3 drawer toolbox. I removed the drawers and drilled out the rivets of the slides. I ordered some micca mb42 bookshelf speakers from amazon along with a lepai lp2020a+ amp. I extended the bass, treble, and volume potentiometers and mounted them where the husky logo used to be. I then swapped out the cheap plastic chrome knobs for some metal guitar knobs I found on ebay. I reused the port tubes, wiring, and banana plugs from the bookshelf speakers in the new box. internal airspace dimensions are the same as the original bookshelf boxes. Built the internal box out of 3/4mdf and used poplar for the face. Cut the speaker and port holes with a jasper jig and a router. It has a standard stereo input and is powered by my ipod for now. I may add a bluetooth module soon, but im broke for now.
 

john9

Member
Joined
Nov 18, 2011
Messages
13
Location
Brighton, MI
I just set up my garage stereo this summer, and I'm happy with the result.
Inside my house, I've changed over to playing music with a dedicated music server (running Vortexbox) using a Logitech Squeezebox Touch player to feed my receiver & speakers. All of my CDs are now on the server, without any loss of quality, as I'm using .flac files instead of .mp3 (these really do sound as good as the original CD.) I've got a lot of vinyl too, which can't be beat as long as you get the turntable sorted out.

For the garage, the criteria were to keep it simple, safe, out of the way, and be able to play from the server in the house, all without much expense.

Wireless is strong in my garage, but I still ran Cat6 cable. It's a 100' from my living room server to the common wall inside the garage, and a Cat6 run was simple going thru my basement.

The Squeezebox Touch players were discontinued this year, so for the garage I built a "VAMP" player from a $29 Pogoplug. The Vortexbox forum shows plans on how to do this, and you get a player with USB out that then needs a convertor before connecting to the receiver. I like the Panasonic digital receivers and they don't need an external DAC, so from the Pogoplug VAMP player, a $30 USB to SPDIF convertor outputs to the receiver.
Control is wireless back to the server, using Ipeng app on any apple device (Ipod, phone, etc..) or any computer via the web interface for Logitech Media Server. The receiver and player are powered on by a single wall switch. Sounds much more complicated than it is, it all just simply works, and lets me play any music I own, or stream any internet radio. I just flip one wall switch to power it all on, then use the phone or Ipod as a remote control. Never have to touch anything on the shelf or anywhere else, as the server in the house is a low power intel atom device that stays on 24/7.

First pic shows Pogoplug base VAMP player on left, the Panasonic rcv'r, and the small silver box on right is the USB to SPDIF convertor. I put these on a shelf high enough to clear the tops of 6' storage cabinets on casters that can move underneath.

Speakers and the system described above are set against the garage's common wall to the house, with speakers facing across the garage (it's a large-ish garage that's wider than it is deep.) To keep the speakers up and out of the way, I used punched angle stock held up with threaded rod and beam clamps. This way the parts are adjustable to fit different size speakers, or change the angle they project (mine are tilted down & toed in slightly) To "fly" speakers safely, don't trust screwing fasteners direct into the cabinets, take the time to suspend them securely. I rigged mine up in a hurry, but it seems to work well and they are held safely. Speakers are Paradigm 5se, these sound good & have rubber surrounds instead of foam. That rubber won't deteriorate like the foam ones, for use in the garage (not climate controlled) it's probably longer lived.

John A

pogoplug2.jpg

LH.jpg

system2.jpg
 

sean Buick 76

Well-known member
Joined
May 7, 2013
Messages
3,221
Location
Edmonton Alberta
I just use an old laptop and a computer sterio, it is pretty loud when I crank it but normally I just leave it at low volume for background music... Otherwise I end up just rocking out and drinking beer... Then I don't get any work done LOL...
 
To avoid these ads, REGISTER NOW!
Top Bottom