Garages, machines, and talent

[bczygan]

This is also a great place to come and see some of the machines and equipment others have. Makes you want to add a lot of things to your own wish list!

 

[Brad Beam]

Southwest ohio

4x4 cnc plasma table
Welder
And a full compliment of wood working tools

 

[drmarkr]

How's this work?

https://maps.google.com/maps/ms?msi...=34.578952,-107.62207&spn=17.600085,33.815918

You guys posting your lists in this thread.....go add your name and list to this map! Just takes a few seconds...

MR

 

[383 240z]

South Western PA

Most of my stuff is metal related:
Here are the big tools, I figure everybody has a grinder ect:
9 x 42 mill
13 x 40 lathe
20 ton press brake
5 ton arbor press
Oxy-Act torch set for cutting and brazing
250 amp MIG
4 X 6 horz band saw
bead roller

I have access to:
CNC 9 x 42 mill
CNC 19 x 48 lathe
CNC plasma cutter with 4 x 10 table
Slip roll
finger brake
stomp shear
300 amp TIG

 

[Thumper68]

When I posted up I forgot my how I make a living tools.

Fluke data transmission tester (for testing a certifying data, cat5, cat5e, cat6, fiber)

Data and phone termination tools

fiber termination set

rg59, rg6, rg11 termination tools

Cable fish (glow) rods

240' fish tape

2,4,6,8,12 foot fiberglass A-frame ladders

3- 16 foot fiberglass extension ladders

1- 24 foot fiberglass extension ladder

2- 28 foot fiberglass extension ladders (might have 3 can't remember)

2 sets of scaffolding w/ 2 planks

5x8 utility trailer

18 foot flatbed trailer with 4 foot sides and tarp cover

 

[Zeke]

Well, this thread is going to get long and hard to find people and their tools/abilities. What you need is kind of a Wiki. Or a searchable database. Same thing?

I just searched the thread at the top for "long beach." Nothing even though it shows under my avatar. However, I searched "phone" and it did show the post on top of mine. So I guess everyone needs to put their location in the text.

You are also advertising what you have on the World Wide Window.

 

[Kevin54]

Just bumping this up to the top. I haven't forgot, but I been busy in the garage fixing my screwups from the week, plus had to mow the lawn. I'm hoping to get started on something tonight or sometime tomorrow. I did e-mail my buddy and he has a sandblaster, so I got that portion out of the road so I can get my press back together. I'll get something together shortly.

 

[fredybender]

Montreal Canada:
14X40 lathe with DRO
6X26 Knee mill with DRO & small 4th axis dividing head / rotary table
180 amp Miller AC/DC TIG
180 amp mig
12T press
7X14 horizontal bandsaw
Lots of fab tools : grinders, carbide burrs, discs, etc...
Sandblasting cabinet
Bead blasting cabinet
Tube bender & die for 1.750 diameter
Tube notcher (both for roll cage fabrication)

General machining, and engineering, but mostly related to motorsport.
TIG Welding is not my strong point, but I can manage...
Added my location on the map link.

 

[Kevin54]

I'm bouncing this back up to the top to let you guys know I haven't forgot it. I've been so busy lately trying to get things situated in the garage, get, or already did get, my press back together, then I ran into another problem with the paint that I used when repairing something, so I have to rework that. I'm hoping to have things caught up this week so I can get back on this and get it going. Trust me, I'm not slacking on it or forgetting it, I'm just trying to get caught up on some other things first.

 

[motorscot]

Added my info:
Hobart 140 mig
Thermal Dynamics 39 plasma cutter
drill press
Milwaukee portaband
grinders
HF Blast cabinet
18" brake
misc other tools

 

[Muggzy]

Hey all, I'm new on this forum but count me in. As soon as Kevin figures out how this is gonna work, I'll add me stuff to the list. I'm in Orange Co. NY.



Muggzy - from my phone

 

[Muggzy]

Hey all, I'm new on this forum but count me in. As soon as Kevin figures out how this is gonna work, I'll add me stuff to the list. I'm in Orange Co. NY.

Muggzy - from my phone

Btw, thanks for taking this on Kevin


Muggzy - from my phone

 

[Albiemanmike]

I am in CT. and will soon be moving from Southern CT. to the middle center of the state. I have a lot of mechanical tools power tools and our new place will have me in a new 37 X 29 2 story garage with doors front and rear. I am more than willing to help anybody I can if I can. What I really need and don't have yet is some welding gear mig/tig and a good set of torches. Always got my eyes open sooner or later I will have those as well.

 

[metalhead212121]

this thread needs a bump....

Northern NJ here.

Got a ton of different hand tools for auto stuff.
Got other hand tools for plumbing and wood working.
Engine Hoist.
Im sure Im forgeting stuff... PM if your close to Northern NJ and need help with anything.

Thanks for link Kevin!

Dan

 

[Jagmandave]

I'm on the Kansas side of KC, and I don't have any real machine tools, but I have a lot of experience on European imports and industrial machinery and I have a well equipped small two car garage (no lift) if I can ever be of some help.

 

[MillerMav]

Mid Michigan/North of Ann Arbor.

Millermatic 180
12 speed Drill press
Horizontal band saw
Many hand tools
Jig Saw and Router
Auto Detailing equipment
Milwaukee Port-a-band
Heated Garage for the winter months (keep it around 60*F)

 

[metalhead212121]

this thread needs a overdue bump.

 

[Kevin54]

It's my fault people. I dropped the ball. Although I haven't forgot it, I haven't done anything with it, and that is entirely on me. I'm glad this was bounced back up to the top though and I will paste a post-it note on my computer so I don't let this go by the wayside.

I know that with all of the other machinist out there, that there are times I could have used a few to do stuff for me.'

I will get on this. I promise!!!!

 

[metalhead212121]

thanks Kevin...

I sent you a PM.

 

[bsaint]

Detroit -

5000w 6' x 12' CNC laser up to 1" processing thickness (MS) with various aluminum and stainless capacity depending on what you need (these are a beast and even if the machine says it can do, it always needs advising.)

 

[Outlander]

Great initiative guys. Sadly, (all my manufacturing/engineering working career was spent in the office, not the shop) the only thing smaller than my talent is my list of equipment and my garage footprint.

Let's see some collaboration projects!

 

[Xtremetalworks2]

Honeoye Falls,NY (25miles South of Rochester) HERE

MM250 MIG W Spoolmatic
300 amp Airco Squarewave TIG
Miller Bobcat 250 W/ Suitcase MIG and TIG
Pakmaster 80 Plasma Cutter- 3/4 cap
4X4 CNC Plasma
5' plate rolls
Angle/Sectional Rolls 5h.p.
Bridgeport Mill
72ton Ironworker- Punch upto 7/8steel
Forge and anvil
Tire power Hammer
Compressor and Grinders
Lathe
Also have access to full fabrication sheet metal shop BRAKES,Shear,Laser-UPTO 10'

 

[Perrorojo]

Honeoye Falls,NY (25miles South of Rochester) HERE

MM250 MIG W Spoolmatic
300 amp Airco Squarewave TIG
Miller Bobcat 250 W/ Suitcase MIG and TIG
Pakmaster 80 Plasma Cutter- 3/4 cap
4X4 CNC Plasma
5' plate rolls
Angle/Sectional Rolls 5h.p.
Bridgeport Mill
72ton Ironworker- Punch upto 7/8steel
Forge and anvil
Tire power Hammer
Compressor and Grinders
Lathe
Also have access to full fabrication sheet metal shop BRAKES,Shear,Laser-UPTO 10'

Small world. I have family in Honeoye falls.

 

[Xtremetalworks2]

Yes very small world !...Where abouts Perrorojo? Are you a transplant from up this way?
Nice to meet you!

 

[Perrorojo]

Yes very small world !...Where abouts Perrorojo? Are you a transplant from up this way?
Nice to meet you!

I have an Aunt/Uncle+2 cousins that moved from Indiana to NY years ago. Their last name is Endicott. Just saw them over the holidays. I've always loved that area but I'm glad I don't have your taxes.

 

[Richard D]

I'm in.
Mill
Lathe
Welder
Torch
Plasma
Shrinker/Stretcher
Mag Drill
Etc.

 

[metalhead212121]

time for another bump.....

 

[Richard D]

Recently added home fabbed belt grinder and welding table.
http://www.garagejournal.com/forum/showthread.php?t=225206

 

[metalhead212121]

one.. more.. bump..

 

[kkroger]

Guess since this is up again I can update my capabilities

Welding, GTAW, GMAW, O/A, Plasma
CNC Plasma (soon to be multiple machines)
CNC Milling (limited not a machining center)
12x36 Metal Lathe
Drill Press
Abrasive Blasting
Tube Bending 1.25" 1.75" 2" Round Tubing, Will be adding Square Tube as well
Tube Rolling 1.25" 1.75" Round, 1" and 1.25" Square, and Flat Bar
Scroll Bending (solid stock up to 5/8" Round or Square)
Powder Coating
Painting
Sheet Metal Brakes and Rolls and Shears...

CAD and CAM work...
Greater KC Area

 

[gymbo39]

 

[Crusarius]

I like this idea alot.

Upstate NY. Canadice area to be closer.

Welders
tube bender 1.75" die only right now.
Mill

lots of home made tools including small break
plate roller
tube roller

lots of stuff. hard to think of it all.