To avoid these ads, REGISTER NOW!

Ghostshield Lithi-Tek 4500

mike4

Member
Joined
Mar 24, 2012
Messages
16
What sort of coverage has everyone experienced with this specific product? Have approx 2700sf of broom finished 4000psi w/ microfiber to cover.

Going to be applying 8505 a week after this goes on.
 
To avoid these ads, REGISTER NOW!

RPH

Well-known member
Joined
Dec 17, 2006
Messages
4,190
Location
Michigan Thumb
I found the broomed finish on my 600 foot outside slab was about 30-40% higher usage compared to trowel finish. When I put down the 8505 it was the same. The broom finish ***** it up.
 

RPH

Well-known member
Joined
Dec 17, 2006
Messages
4,190
Location
Michigan Thumb
It was quite awhile ago but compared to the 2100 sq ft inside. It sucked both up big time. The inside I could work it in and watch for puddling. Outside it was like steam vapor on hot day, not around long enough to worry about.
 
To avoid these ads, REGISTER NOW!

Garage Flooring

ALLIANCE MEMBER
Joined
May 21, 2011
Messages
5,288
Location
Grand Junction, CO
Very odd. None of my replies from yesterday are showing. 4500 and 8505 require you to be very careful about how much material you put on the floor.

One concentrated gallon of 4500 mixed 3:1 will be plenty. Only apply what soaks in right away. On the 8505 apply what soaks in. Wait a minute and spray the same area again. You will get a nasty white film if you let it sit.
 
To avoid these ads, REGISTER NOW!
Top Bottom