Grohe faucet installation tool

[Blt2Lst]

It's actually for the soap dispenser but I'm assuming the faucet has the same nut on it.
In addition to installing this soap pump I also need to tighten the faucet fixture also, when I removed the soap dispenser I was able to do it by hand since it was not too tight.
I was just wondering if someone knows of an installation tool for these nuts?

 

[ckeboss]

Basin Wrench?

 

[Blt2Lst]

Basin Wrench?

So just a home depot special would do?

 

[vjquan]

That's designed to be tightened from the top by the soap dispenser itself. The nut is to clear close corner areas and will hold itself. The faucet itself will have a different method. My Grohe faucet has a spin on nut with 2 screws to tighten it down.

 

[ckeboss]

There is also this style: https://www.homedepot.com/p/RIDGID-EZ-Change-Faucet-Tool-56988/303528759

 

[Blt2Lst]

That's designed to be tightened from the top by the soap dispenser itself. The nut is to clear close corner areas and will hold itself. The faucet itself will have a different method. My Grohe faucet has a spin on nut with 2 screws to tighten it down.

I think I was overthinking this, yes I could just tighten this up by turning the dispenser itself, but the faucet and the hand wand would probably be a different issue I'll have to poke my head under there and see what it looks like, I hate working under sinks.