Harbor Freight Coupon Thread

[diggerrick]

Link?

Jim

I looked for them on Rural King's website, but couldn't find them. They have others on the site, but not the set I saw in the Marion, Ohio store yesterday.

Photos are from my phone.

$600 for the pair is pretty good, but I'd rather have more shallow drawers and just a couple deep ones like the HF boxes.

 

[bhclark]

I went into Rural King exactly once. Horrible customer service. Reminded me of Menards. Hire only under 30 somethings with zero experience and no brain, provide zero customer service.
It's like a Wal-Mart version of Tractor Supply.....

 

[700hpAMG]

For anyone looking for a less expensive top for the 13 drawer cabinet, I ran across these at Rural King, but they are actually only 41" wide, which I thought matched the old crinkle finish HF boxes..

The top box is $219.98 and has 7 drawers (deep lower right drawer) instead of HF's 8 drawers (all shallow drawers).

The bottom box is $379.98 and has 11 drawers (bottom 2 drawers on each side are deep) instead of HF's 13 drawers (bottom drawer only on each side is deep).

The RK boxes do have ball bearing slides and drawer liners. I don't know if they are as havy as the HF boxes, but I do know they would be good enough for me.

Looks good, by chance do you know if the deep drawers have double rollers like the HB units?

Good price either way.

 

[debs4610]

Hi all, new member. Does anyone happen to have the $50 off coupon for the 1500 Lb. Aluminum Tri-Fold Loading Ramp? (Haul Master - Item #90018) I think it expires 7/4/12. I'm just looking for the coupon code. Thanks!

 

[dg-garage]

Had trouble getting the 25% coupon to work on-line with the 1300 Lb. Electric Hoist with Remote Control. Called order number and they would not allow to use 25% while ordering over the phone. I asked to speak with manager and they took the order and used my 25%....so, got the 1300 Lb. Hoist for $127.49 from $199.99. Not a bad price and will work well when I install my I-Beam in the garage with my 2-ton trolley and added new Hoist.

http://www.harborfreight.com/1300-lb-capacity-electric-hoist-2954.html

 

[HaroRider]

I think I am going to pick up the 2 ton engine hoist with my 25% coupon. My 1 ton is not cutting it. Seems to short for my needs.

 

[rouseyss]

It isnt letting me place an online order. Im gonna have to call customer service at 9 to see whats going on.

 

[rouseyss]

Just ordered the 301 pc tool set for $142. Now I need to figure out how to get the 13 drawer box for $300 bucks.

 

[dg-garage]

Who took advantage of the 25% Easter coupon and what did you buy? Here is my list:

***Order Summary***
1 2954-0VGA 1300 Lb. Electric Hoist with Remote Control $127.49
1 90760-0VGA 1/4" x 50 ft. Poly Rope $1.69
1 36555-0VGA Magnetic Bit Holder $1.99
1 66545-0VGA 21" Bow Saw $4.49
1 67010-0VGA 12" x 15" Motorcycle Cargo Net $2.99
1 9541-0VGA 16" x 24" Steel Square $4.99
1 67477-0VGA 2 Piece Heavy Duty Pry Bar Set $3.59
1 47737-0VGA 25 ft. x 1" QuikFind Tape Measure $0.00

 

[eek]

I went there today to try and pick up the 56" 11 drawer tool box. They were all out and wouldn't let me buy the floor model. The manager was really cool and issued out a rain check and knocked off $50 from the $699 coupon price. He originally offered the 25% off on the $799 price but found out the coupon does not apply to tool chests/cabinets. Still a deal at $649 +tax. Just have to wait for it to come in now.

Anyhow byy the time I got there alot of the good stuff was already gone. So Just picked up some small items like some xtra long needle nose pliers, some wobble sockets and a socket tray organizer. Girl at the register was really nice and offered to to do 3 separate transactions utilizing the 25% discount. LOL she hooked it up with a set of free screwdrivers and a multi-meter.

 

[unslow1]

I went there today to try and pick up the 56" 11 drawer tool box. They were all out and wouldn't let me buy the floor model. The manager was really cool and issued out a rain check and knocked off $50 from the $699 coupon price. He originally offered the 25% off on the $799 price but found out the coupon does not apply to tool chests/cabinets. Still a deal at $649 +tax. Just have to wait for it to come in now.

Anyhow byy the time I got there alot of the good stuff was already gone. So Just picked up some small items like some xtra long needle nose pliers, some wobble sockets and a socket tray organizer. Girl at the register was really nice and offered to to do 3 separate transactions utilizing the 25% discount. LOL she hooked it up with a set of free screwdrivers and a multi-meter.

I had to get a raincheck for mine also. It only took a week. Nice box.

 

[Chief Geek]

Talk about setting up guys for failure! 25% off on Easter Sunday? I had to pull some serious BS out of my rear to get the wife not tear my head off for this trip. Her sister locked herself out of her house. Instead of having her BF come over I volunteered to run out and assist. I had to enter attic through car port, walk length of house from rafter to rafter through insulation (not easy at over 6'1"), then drop into closet hoping dogs would recognize me before biting all so I could hit harbor freight "since i was in the area". I earned that 25% off the airbrush.

 

[vibblueser]

Anyone have a valid coupon for the 3/8 torque wrench

 

[concealer404]

This work?

http://widgets.harborfreight.com/ws...tml&single=true&cust=02005350272&keycode=1004

 

[diggerrick]

Looks good, by chance do you know if the deep drawers have double rollers like the HB units?

Good price either way.

I won't be out that way again until Wednesday - I'll find out more details then.

 

[bimmerZ5]

can anyone post a coupon for the large plastic service cart?

http://www.harborfreight.com/24-inch-x-36-inch-industrial-polypropylene-service-cart-92862.html

if not, does anyone know if the 20% coupon excludes this? its not technically a "tool cart", but I never know how they interpret.

 

[vibblueser]

Thank you for the torque wrench coupon

 

[mikewoods]

can anyone post a coupon for the large plastic service cart?

http://www.harborfreight.com/24-inch-x-36-inch-industrial-polypropylene-service-cart-92862.html

if not, does anyone know if the 20% coupon excludes this? its not technically a "tool cart", but I never know how they interpret.

Here is one for the steel cart, I'll see if I can find the one you're looking for.

http://images.harborfreight.com/hftweb/insidetrack/itccoupons/images/15.jpg

EDIT: its only good on April 15th, you also must be a ITC member

 

[concealer404]

Here is one for the steel cart, I'll see if I can find the one you're looking for.

http://images.harborfreight.com/hftweb/insidetrack/itccoupons/images/15.jpg

EDIT: its only good on April 15th, you also must be a ITC member

I swear i just saw that one in store on Saturday for $28.

 

[xcoldricex]

Who took advantage of the 25% Easter coupon and what did you buy?

1/2" earthquake and got the gf to get some 1/2" metric impact sockets. not a bad set for under $100!

 

[rouseyss]

does harbor freight have any impact socket sets that dont skip sizes? if so I need a coupon for them lol

 

[concealer404]

does harbor freight have any impact socket sets that dont skip sizes? if so I need a coupon for them lol

Could probably get this:

http://www.harborfreight.com/13-piece-12-drive-metric-impact-socket-set-67902.html

and this:

http://www.harborfreight.com/13-piece-12-drive-sae-impact-socket-set-67918.html


I just bought this because it has all the sizes i actually need i think: http://www.harborfreight.com/37-piece-38-and-12-drive-combination-impact-sockets-68011.html

(Well, except for 19mm, but i can buy that separate if i have to.)


But now, i just looked through my emails and i don't have a coupon at the moment. Could do two separate transactions and use the 20% off coupon, though. Would be under $50 for both sets.

Though... for that price, i'd start looking at IR stuff on Amazon.

http://www.amazon.com/dp/B000HGIP7M/?tag=atomicindus08-20

http://www.amazon.com/dp/B000HGKR1E/?tag=atomicindus08-20

 

[rouseyss]

Thanks for all the links. I have used some of hf impact sockets before and have been very impressed. I just wish it came with a 24 mm. Ill just have to get that seperate. 60 bucks for impact sockets isnt bad but not much cheaper than the IR so I think you might be right. Ill have to see if I can talk the manager into giving me a discount

 

[MilesToEmpty]

Are those IR impact sockets good? I could use some short ones. Ive got both standards in Craftsman deep sockets.

Id feel bad getting rid of the cases lol.

 

[ultimateplayer]

Does anyone have a coupon for the 6" bench grinder, either with or without the gooseneck light? I searched this thread and did not find any.

 

[rouseyss]

I need a printable coupon for the 3 ton jack stands I can only find the online code one. Anyone?

 

[Eric Hawkins]

I need a printable coupon for the 3 ton jack stands I can only find the online code one. Anyone?

I just looked them up, they are showing on sale on the website, I think the online sale stuff is for the most part on sale in the store. I would use the 20% off coupon with them on sale. Probalby be a better deal then a coupon for the stands them self. What is the coupon code?

 

[rouseyss]

66127647... Brings them down to $15.99

 

[85mcss]

In for the Jackstand coupon also... I wish there was a way to check out online with no shipping and just pick up in-store with your reciept!

 

[concealer404]

This what you're looking for?

http://widgets.harborfreight.com/ws...tml&single=true&cust=02005350272&keycode=1004

My complaint with that particular coupon is that i like those better than the orange/white ones... but none of the local stores stock the grey ones.

 

[MTNiner]

I am looking for a printable coupon or the coupon code for the 1-ton shop crane for $99. I was told by a harbor freight that there is one out there now that expires 5/10/12, but I haven't been able to find it.

Thanks for your help.

Shane

 

[CISO1969]

Talk about setting up guys for failure! 25% off on Easter Sunday? I had to pull some serious BS out of my rear to get the wife not tear my head off for this trip. Her sister locked herself out of her house. Instead of having her BF come over I volunteered to run out and assist. I had to enter attic through car port, walk length of house from rafter to rafter through insulation (not easy at over 6'1"), then drop into closet hoping dogs would recognize me before biting all so I could hit harbor freight "since i was in the area". I earned that 25% off the airbrush.

Love it! You earned your wings bro

 

[mikewoods]

This what you're looking for?

http://widgets.harborfreight.com/ws...tml&single=true&cust=02005350272&keycode=1004

My complaint with that particular coupon is that i like those better than the orange/white ones... but none of the local stores stock the grey ones.

If you look closely, the item number is the same for the orange and the grey ones.

I have a coupon for $14.99 at home. I'll post it up when I get a chance.

 

[mango_420]

Here is the crane coupon. Sometimes it takes a little of work on your part... POST #1654

Here you go palmmann, $99 as requested. If this dont work let me know and ill send it any other way needed.

 

[MTNiner]

Thanks mango, that really helps me too. Appreciate it!

 

[concealer404]

If you look closely, the item number is the same for the orange and the grey ones.

I have a coupon for $14.99 at home. I'll post it up when I get a chance.

Oh well now i'm not sure if i'm happy about that or not. Looks like i should have been buying more jack stands, but i want the grey ones.

 

[rouseyss]

In for the coupon for 14.99 will definitely go pick them up at that price

 

[chrommagman]

This is random but I thought I should do a review of my impact that I got from HF.

It's the cheapest 1/2' impact that they have and it shows it! It works well for 20 bucks. The only prob that I have had with it is that the plastic nose cone will not go back on and that socket holder thing is messed up and broke.
I am going to return the one that I have and get a new on. But it works great at 140 psi.

link :http://www.harborfreight.com/air-to...-half-inch-pneumatic-impact-wrench-95310.html

 

[rouseyss]

im going to hf on friday. any deals that are real good going on right now. I am pretty much out of tools completely except the 301 pc set I bought last sunday from hf so needless to say I dont have much at my new place.

 

[bimmerZ5]

im going to hf on friday. any deals that are real good going on right now. I am pretty much out of tools completely except the 301 pc set I bought last sunday from hf so needless to say I dont have much at my new place.

what kind of tools do you need? simple house repairs? car repairs? remodeling?