Harbor Freight Coupon Thread

[Flounder_Pounder]

For welding info, I'd start looking at these two sites and similar ones

http://weldingweb.com/

http://www.weldingtipsandtricks.com/

 

[aka Larry]

Sorry to sound like an idiot, but the latest 20% off coupon says it can be used on-line, but I don't see any kind of code on there to input it on-line. What am I missing?

 

[472scout]

I beat the hell out of mine, still kicks just fine..I went to the HF 170a 220v machine though and that also seems to work pretty well for me. I've used it on cages, bumpers, rock sliders, axle trusses, control arm/track bar brackets, etc, etc.

Control arm/track bar are critical. Post up pics of the welds if you dare.

Sorry to sound like an idiot, but the latest 20% off coupon says it can be used on-line, but I don't see any kind of code on there to input it on-line. What am I missing?

Use the number in the bar code. I think one time I had to play around to get it to work using only the last maybe 6 digits.

Also there's a 25% coupon. Good to mid March.

 

[MNRZR]

Also there's a 25% coupon. Good to mid March.

Care to share?

 

[JimVonBaden]

Jim,

You call that welding?

Seriously, I guess a bench would be ok with those welds but no way I would trust my life to those welds. Have you ever owned a blue or red machine?

Wow, what a bunch of welding snobs! I welded a bench, and a tire changer, and I have welded together part of my trailer almost two years ago, and immagine that, it is still holding.

Sure, I would prefer a MIG, but for the little welding I do, my little flux core does just fine. I am not building roll cages or race cars, so I am quite confident that for my use the HF welder is just fine! Some of you wouldn't believe HF could possibly produce a welder that could possibly work because it doesn't cost enough!

Jim

PS I hammered the **** out of it with a 2 pound sledge, and not a single weld broke.

 

[skulldrinker]

more coupons less welding

 

[472scout]

Wow, what a bunch of welding snobs! I welded a bench, and a tire changer, and I have welded together part of my trailer almost two years ago, and immagine that, it is still holding.

Sure, I would prefer a MIG, but for the little welding I do, my little flux core does just fine. I am not building roll cages or race cars, so I am quite confident that for my use the HF welder is just fine! Some of you wouldn't believe HF could possibly produce a welder that could possibly work because it doesn't cost enough!

Jim

PS I hammered the **** out of it with a 2 pound sledge, and not a single weld broke.

Uh, you used that "welder" on a trailer? I hope it was just a tail light bracket or something. I actually lost a trailer after a weld broke. Very heavy 18 ft car trailer, professionally built, that the tongue separated from the a-frame at the weld. Fortunately, it was empty when it happened.

 

[JimVonBaden]

Uh, you used that "welder" on a trailer? I hope it was just a tail light bracket or something. I actually lost a trailer after a weld broke. Very heavy 18 ft car trailer, professionally built, that the tongue separated from the a-frame at the weld. Fortunately, it was empty when it happened.

Like I said, 2 years and it is still holding. I learned long ago, it isn't the tool you are using, it is the "tool" using the tool that counts. If you require a $500+ welder to do a good job, maybe it isn't the welder holding you back.

Jim

 

[sxk122]

i'm no welding expert, but I'm jealous of your end result jim. For non structural objects, that would be great..... you can pm me, but including all supplies, how much money do you have ******* in welding?

 

[ajazeller]

Looking for a coupon for the 1-ton shop crane. On sale for $99.

Printable would be preferable but would also pay shipping + a few bucks for the effort.

Thanks!!

 

[Kevin54]

Looking for a coupon for the 1-ton shop crane. On sale for $99.

Printable would be preferable but would also pay shipping + a few bucks for the effort.

Thanks!!

Just out of curiosity, can a person walk into HF and pick up one of their flyer's and turn it in at the register? I've never done it, but I know they keep flyer's at the doors so you can grab one going in or out. I would think that ALL HF's would have the flyer's at the door.

 

[clarkebd]

Yes, but I don't think they have ALL the coupons in there. I find most of my coupons in the various 1 page ad's they seem to place in different magazines.

 

[BSAschields]

Anyone use their work bench . I have one I havent opened and I am thinking I dont really need it. Unless someone thinks its th best thing since sliced bread , I think I will return it. Are they sticklers for receipts? I dont think I have it anymore

 

[rslaback]

Looking for a coupon for the 1-ton shop crane. On sale for $99.

Printable would be preferable but would also pay shipping + a few bucks for the effort.

Thanks!!

Here you go.

 

[my5sonburns]

Care to share?

25% off any single item @Harbor Freight Tools using coupon code 98572041. This coupon code is valid through Tuesday, March 26, 2013. It must be online only.

 

[my5sonburns]

If you want a 20% off coupon to print... Here:

http://www.harborfreight.com/affiliate1-11.html

 

[sjlee]

Just out of curiosity, can a person walk into HF and pick up one of their flyer's and turn it in at the register? I've never done it, but I know they keep flyer's at the doors so you can grab one going in or out. I would think that ALL HF's would have the flyer's at the door.

I've looked at the flyers in the store before, but they don't usually have any of the coupons in it... just the ads for the things on sale.

 

[MNRZR]

25% off any single item @Harbor Freight Tools using coupon code 98572041. This coupon code is valid through Tuesday, March 26, 2013. It must be online only.

Cool. Thanks.

 

[diggerrick]

Like I said, 2 years and it is still holding. I learned long ago, it isn't the tool you are using, it is the "tool" using the tool that counts. If you require a $500+ welder to do a good job, maybe it isn't the welder holding you back.

Jim

Quoted for truth.

My experience has been that the wire is more important than the cost of the machine.

 

[Arachnotron]

Anyone have a $99 coupon for the Low profile 2 Ton floor jack. Item#68050
I've seen some floating around ebay that are good until the end of the month.


http://www.harborfreight.com/low-pr...k-with-rapid-pump-2-ton-heavy-duty-68050.html

 

[skulldrinker]

I need the coupon for Pneumatic Brake Fluid Bleeder
Central Pneumatic - item#92924

http://www.harborfreight.com/brake-fluid-bleeder-92924.html

It was $19.99

I had the coupon then threw it away but now I need this bleeder and the coupon. Don't remember where i got it from.

 

[skulldrinker]

Cancel that request


found it in the inside track club page.

i need the coupon for pneumatic brake fluid bleeder
central pneumatic - item#92924

http://www.harborfreight.com/brake-fluid-bleeder-92924.html

it was $19.99

i had the coupon then threw it away but now i need this bleeder and the coupon. Don't remember where i got it from.

 

[rslaback]

Anyone have a $99 coupon for the Low profile 2 Ton floor jack. Item#68050
I've seen some floating around ebay that are good until the end of the month.


http://www.harborfreight.com/low-pr...k-with-rapid-pump-2-ton-heavy-duty-68050.html

I have one for $69.99 for this jack: http://www.harborfreight.com/low-pr...rapid-pump-25-ton-heavy-duty-steel-68049.html but nothing for the 2 ton.

 

[Mike F]

I seem to have thrown out my circular with the 20% off coupon. Can anyone please scan one in and post it?

 

[junkman104]

Printable

http://www.harborfreight.com/digitalsavings.html?hftref=cj

 

[Nekit]

Anyone have a $99 coupon for the Low profile 2 Ton floor jack. Item#68050
I've seen some floating around ebay that are good until the end of the month.


http://www.harborfreight.com/low-pr...k-with-rapid-pump-2-ton-heavy-duty-68050.html

Here a link to a page that has the $109 deal for this jack that is printable.
http://digitaledition.qwinc.com/publication/?i=137957&p=45

The code for the for the $99 deal is 88873490

I can't find a printable version of the $99 deal. If you find one please post it I'm looking for it too.

 

[ajazeller]

Thanks for the 1 ton crane couponl!!!!

Cheers

 

[SigElite]

did everyone see the $130 off the 4 drawer service cart? i saw the coupon in my Guns&Ammo Magazine

 

[Mike F]

Printable

http://www.harborfreight.com/digitalsavings.html?hftref=cj

Thanks Junkman! Now if the folks at Lowes will accept it I will apply it to that 24' Werner ladder I need. I also have plenty of $ left on the HF gift card my wife gave me for my birthday so it will come in handy there.

 

[cheechi]

if the folks at Lowes will accept it I will apply it to that 24' Werner ladder I need.

Let us know the results of that conversation.

 

[_Allan]

Here is a coupon for the elusive 2 ton, low profile, long reach HF floor jack.

http://i1108.photobucket.com/albums/h411/quattroaudi10/3e7faae294ff8f7dee7e97d2ca3a4918.jpg

 

[_Allan]

Here is the coupon for the elusive 2 ton, low-profile, long reach HF floor jack (68050).

 

[Nekit]

Here is the coupon for the elusive 2 ton, low-profile, long reach HF floor jack (68050).

Thanks

 

[vartz04]

Anyone have the 89.99 welder coupon

 

[rslaback]

Anyone have the 89.99 welder coupon

This one?

 

[Arachnotron]

Anyone have a coupon for the 6 ton jack stands #38847?

 

[djcslice]

Arrgggg I missed the deal on the 44in top chest. Anyone have any coupons for it? I'm also looking for the bottom chest $349 coupon.

 

[chipper]

44 Inch bottom box will be 349 the march 8th weekend no coupon needed i plan to pick one up myself

 

[shiftdrift]

i don't think the 25% off online coupon works, didn't for me.

 

[1967marti]

Anyone have a cupon for the air hose reels ? The 25 or 50 footers?

Thanks!