Harbor Freight Coupon Thread

[Cryptic1911]

picked up a couple of the 1250lb mechanical wheel dollys over the weekend.. pretty cool stuff, and they jacked up my car easily. I need to go grab a couple more now so I have a full set.


http://www.harborfreight.com/1250-lb-capacity-mechanical-wheel-dolly-67287.html

 

[skulldrinker]

picked up a couple of the 1250lb mechanical wheel dollys over the weekend.. pretty cool stuff, and they jacked up my car easily. I need to go grab a couple more now so I have a full set.


http://www.harborfreight.com/1250-lb-capacity-mechanical-wheel-dolly-67287.html

Are their any uses for these other than one under each wheel? I don't see having only 1 or two to be any good.

 

[Cryptic1911]

with two of them you can move the frontend or assend of the car sideways, then push it straight. Obviously four is the optimal number to have, but I only grabbed two because I couldn't get 4 with the coupon at the time, since they only accept one coupon per person, per day. I'm gonna go back and get a couple more also with the coupon though

 

[skulldrinker]

I guess if you do that on the front you can use the floor jack under the pumpkin and slide the rear over.

Or HF sells those furniture movers pads. I wonder if they would work. Maybe lay some carpet down first.

http://tinyurl.com/bzwmej7

 

[BTC]

This may be a stupid question, but how do you redeem the coupons listed in this thread? Are people just printing them and taking them to the store?

 

[bimmerZ5]

This may be a stupid question, but how do you redeem the coupons listed in this thread? Are people just printing them and taking them to the store?

yes. or you can use them online by typing the number under the barcode.

to the OP: questions like these have been asked many times by new people, perhaps you can add a FAQ to the 1st post?

 

[BTC]

yes. or you can use them online by typing the number under the barcode.

to the OP: questions like these have been asked many times by new people, perhaps you can add a FAQ to the 1st post?

Thanks. I did check the initial post to see if this had been addressed. I think one of the coupons I read said that the original coupon was required, which is why I asked whether printing would work.

 

[mf44]

Thanks. I did check the initial post to see if this had been addressed. I think one of the coupons I read said that the original coupon was required, which is why I asked whether printing would work.

Also, FYI many stores let you just show a photo of the coupon on your phone...they will key in the number and you're all set.

 

[diggerrick]

Also, FYI many stores let you just show a photo of the coupon on your phone...they will key in the number and you're all set.

I've done that many times in Mansfield, Ohio store.

 

[mdbeck1]

Also, FYI many stores let you just show a photo of the coupon on your phone...they will key in the number and you're all set.

Actually I just pull up the top web site from these links and show it to the cashier. If they can read the number they will give you the credit.

Digital Savings http://www.harborfreight.com/digitalsavings.html?hftref=cj
Inside Track Club http://www.harborfreight.com/itc-deals.html
Monthly Savings http://images.harborfreight.com/cpi/emails/SavingsBook/monthly_savings_book.html

 

[Blacklisted]

Anyone have a cupon for the air hose reels ? The 25 or 50 footers?

Thanks!

Here you go.

 

[Blacklisted]

Is there ever a coupon for the 7 Drawer End Cabinet? Or is the $199 the best price it gets? I'm looking to get one for my 44" roller.

 

[TommyV9]

Anyone have a 1000 lb lift table coupon?

 

[Nick Ferry]

 

[djcslice]

New?! Spring easy lift spring loaded latch?!

 

[skamp]

Anyone have a coupon for the universal tool stand? Kouponthis shows one for $19.99. Looking for this one:

http://www.kouponthis.com/downloads/1346075/

Also if anyone has one for the mobile base that would be great. I have not seen any lately so I don't think there is one but figured it does not hurt to ask.

Thanks!


Steve

 

[getbent4x4]

25% off single item 73815411, just act like you're reading it off your phone. expire 6/18/2013

 

[Badger05]

Anybody have a current coupon for the 2.5 Ton low profile floor jack for $69.99? Can't find it anywhere right now...

 

[rslaback]

Anybody have a current coupon for the 2.5 Ton low profile floor jack for $69.99? Can't find it anywhere right now...

Is this the jack you mean?

 

[Badger05]

Is this the jack you mean?

Yes, that's it. Much appreciated!

 

[ilovevocs]

25% off single item 73815411, just act like you're reading it off your phone. expire 6/18/2013

I assuem standard terms per the 20% off coupon?

Thanks,

.d

 

[getbent4x4]

25% off single item 73815411, just act like you're reading it off your phone. expire 6/18/2013

http://s18.postimage.org/hvlcexme1/Scan.jpg

 

[wesalexleft]

Coupon for High lift motorcycle Jack

Anyone got a coupon for the High lift motorcycle jack, item#99887? I havea 20% and a 25% off coupon, but looks like the both exclude floor jacks. It's for this..

 

[Nick Ferry]

I don't have one of these and I don't know if they work well or not, but this seemed like a killer coupon so I thought I would share.

 

[Gore]

I just bought one....broke the arbor bolt on the first cut and the blades fell on the ground.

It was cutting some 3/16" steel fwiw

 

[TruckMechanic]

I have one a love it! It is a rough cut saw though, not for finish work. I have cut 7/8" key stock with mine with no problems.

 

[davewolf678]

hello I'm looking for the 12 ton shop presses coupon for 89.99 i just need the code number. like this one http://www.ebay.com/itm/12-Ton-Shop...51230927179?pt=US_Coupons&hash=item3a7e87b94b

i got 20% off a $100 item or 15% 65 or 10% of 50

 

[fxt]

that is a good price if we can find the coupon

 

[rslaback]

Here you are.

 

[cubicle]

Anyone seen a coupon for a rolling creeper seat?

 

[BTC]

I used the $99 coupon on the 68050 floor jack last night. That coupon also lowered the price on a two year replacement warranty from like $35 to $15, so I got that as well. I also picked up their torque wrenches for $9.99 each. Those were my first HF purchases.

 

[baron405]

http://www.harborfreight.com/oct-tab1.html here is a list of current promotions. the $169 cart is a steal

 

[rslaback]

Anyone seen a coupon for a rolling creeper seat?

Would you like that in pneumatic or standard?

 

[6brzina]

Does anyone have a coupon for the 56" tool box?

 

[rslaback]

Does anyone have a coupon for the 56" tool box?

Here you are.

 

[6brzina]

Thanks.

 

[davewolf678]

here the code for the 20% off a $100 purchase 42233591 and for 15% $65 is 11749462 and 10% for $50 is 99351324

and the link i do know if it pull up for you all
http://widgets.harborfreight.com/ws...tml&single=true&cust=78159450624&keycode=1002

 

[redneck78]

that coupon is expired.

 

[rslaback]

that coupon is expired.

So it is. Damn. I have another but it expired 2/9/13. I don't even see any of them on eBay. Perhaps they aren't sending that one out anymore.

 

[Mike F]

Thanks Junkman! Now if the folks at Lowes will accept it I will apply it to that 24' Werner ladder I need. I also have plenty of $ left on the HF gift card my wife gave me for my birthday so it will come in handy there.

Let us know the results of that conversation.

I tried, but they would not take it. Nor would they take a picture of a 10% off lowes card I got off the net ( to be fair, though, that picture did not include the bar code at the bottom of the card). Bought the ladder anyway.