GarageNewbie24
Active member
- Joined
- Jun 20, 2013
- Messages
- 28
Does anyone have a coupon for the 4x6 bandsaw?
Harbor Freight Coupon Thread
- Thread starter RbrtAWhyt
- Start date
QwikKotaTx
Well-known member
FYI, it is on sale now, with coupon at least. $359. I picked one up on Friday, very nice for the price but bring a friend and a truck! Heavy...
st cloud rustoms
Active member
This worth the $$?
I used to have the trailer, suited my needs, hauling a 5-600# four wheeler, brush, dirtbike, etc. It's a little flimsy when bolted together, adding a 3/4" piece of plywood to the top stiffens it. If you have the ability, I'd grind the intersections of the beams and weld it, then paint it - would make it a more rigid trailer, but I had no issues with it bolted together.
I'm with St. Cloud. I bought mine used off a guy who had already welded it together and threw 3/4 inch ply on it. Does everything I need it to do. However unloaded mind bounces a lot. If its loaded does real well but unloaded is kind of a pain.
upgrading
Well-known member
Timpala
Well-known member
http://www.bankinfosecurity.com/impact-harbor-freight-attack-grows-a-5970/op-1
Harbor Freight has been breached. Check your credit card statements.
Harbor Freight has been breached. Check your credit card statements.
Vegaman_Dan
Well-known member
My local HF store has had a sign at the register about this for over a month. It's good advice to always check your CC statements instead of waiting to find out after the fact.
Timpala
Well-known member
Excellent. Good to know. I never go in the local store.
This just came across my desk so I thought I'd pass it along.
This just came across my desk so I thought I'd pass it along.
Vegaman_Dan
Well-known member
Never got the parking lot sale coupons in the mail this month. Usually get those with my IT membership ads.
I've found the best combo is to take several ads- ITC, monthly coupons, and several car / home improvement magazines. The same item can be many different prices, and the ITC price isn't always the best. Often it's the magazine that has the best price. It also reliably has the 20% off coupon.
The 20% coupon can be used on any on sale item that does not have require a coupon (excluding the usual tool storage, jacks, and that trencher that nobody has ever bought)
I've found the best combo is to take several ads- ITC, monthly coupons, and several car / home improvement magazines. The same item can be many different prices, and the ITC price isn't always the best. Often it's the magazine that has the best price. It also reliably has the 20% off coupon.
The 20% coupon can be used on any on sale item that does not have require a coupon (excluding the usual tool storage, jacks, and that trencher that nobody has ever bought)
IONH
Well-known member
I went in there for the first time in about 5 weeks yesterday actually and saw they had a new point of sale system. About time. It still looks ancient but at least they can look up the transactions. Also found 3 of me with the same phone number.
J Banning
Active member
Hi all,
I'm looking for a coupon for the 60 Piece Alloy Steel SAE/Metric Tap and Die Set (Item #: 35407).
Thanks!
I'm looking for a coupon for the 60 Piece Alloy Steel SAE/Metric Tap and Die Set (Item #: 35407).
Thanks!
Hi all,
I'm looking for a coupon for the 60 Piece Alloy Steel SAE/Metric Tap and Die Set (Item #: 35407).
Thanks!
I picked one of these up a couple weeks ago, just a warning that it is almost completely useless. I really only needed one of the M8 dies, and I managed to chase two already formed threads with it before it started breaking teeth.
Hi all,
I'm looking for a coupon for the 60 Piece Alloy Steel SAE/Metric Tap and Die Set (Item #: 35407).
Thanks!
yea, the HF version of this kind of tool that relies on quality steel and tight tolerances is bound to be a disappointment.
upgrading
Well-known member
Attachments
timtim2008
Well-known member
anyone buy this?
ChevyEFI
Well-known member
wb2vsj
Well-known member
Nope - but I have played with solar a while back. For that price you can have a lot of fun. That charge controller cannot be set for the chemistry of the battery you want to use, but this isn't meant to be a permanently installed system either.
If you want to run any 120V devices, you'll need an inverter.
Note - 45 Watts is the max on a clear, cloudless sunny day.
if you don't need the long reach...
Attachments
Fast LT1
Well-known member
I've had really good luck with mine. Use it weekly for the past year.
John Mc
Well-known member
The HF tap & die sets are just about good enough to use for cleaning already cut threads with minor blemishes - say getting the grass out of your lawnmower blade nut. And that is only with liberal application of cutting oil. Any major damage, rust, or weld spatter will destroy the teeth in short order. And forget about cutting new threads.
But you can buy just the quality replacements for the units that break. The others can just sit there.
But you can buy just the quality replacements for the units that break. The others can just sit there.
JasonF
Well-known member
Anyone have a coupon for the 10amp/120v Demolition hammer #68148? I have a coupon but its only for $50 off, I'm sure there is a better one out there. Also will the store take the 25% off coupon if you cant read the fine print? I was going to use the one above but the print is blurry.
dodge610
Well-known member
I just used the coupon that was printed on here for the 25% off today they took it with no questions at my HF. Got the CEN TECH inspection camera with it that thing is great. Played with it for an hour or so tonite.
upgrading
Well-known member
upgrading
Well-known member
Moose97
Well-known member
Anyone know what will be on sale at sidewalk sale starting tomorrow?
QwikKotaTx
Well-known member
Typically they only take one super coupon. If the $50 off is more than 20% of their list or in store sale price I would use that one. Usually the in store sale price is not as low as the coupon price is.
Moose97
Well-known member
56 inch tool box for $699. I'm getting one
I thought I saw somewhere that they were gonna have the black 5 drawer cart on sale for something like $109.00. ? Any idea if that's the case?
Muggzy
Well-known member
I thought I saw somewhere that they were gonna have the black 5 drawer cart on sale for something like $109.00. ? Any idea if that's the case?
I just got one 2 weeks ago for that with a direct mail coupon that I found in a booklet that someone left laying in the store. I love it:
Muggzy - from my phone
Last edited:
RyanTN
Active member
I thought I saw somewhere that they were gonna have the black 5 drawer cart on sale for something like $109.00. ? Any idea if that's the case?
How about $99.99?
Attachments
56 inch tool box for $699. I'm getting one
hmm. now i see the 44 inch box is on sale also..
upgrading
Well-known member
Just there.
Bought a paint brush and tape measure for 41 cents total after coupons.
Parking lot sale was lame.
Most stuff could be had for the same price or less with coupons.
It appears HF takes advantage of the "herd" mentality to make some major bucks with these "sales".
Bought a paint brush and tape measure for 41 cents total after coupons.
Parking lot sale was lame.
Most stuff could be had for the same price or less with coupons.
It appears HF takes advantage of the "herd" mentality to make some major bucks with these "sales".
$359.00, no coupon needed.hmm. now i see the 44 inch box is on sale also..
central1ny
Well-known member
- Joined
- Feb 22, 2009
- Messages
- 134
central1ny
Well-known member
- Joined
- Feb 22, 2009
- Messages
- 134
ex-x-fire
Well-known member
Yeah, lots of guys have them. Check out the thread "modifications to HF 5 draw cart."
They're hard to beat at that price.
Last edited:
This is a very good cart. Youll love it if you get it.
ChevyEFI
Well-known member
I used this off their home page yesterday
Also used a 25% from this thread and got a new air hose. And some fittings.