Harbor Freight Coupon Thread

[leftyz]

 

[leftyz]

thank you!

A couple bucks cheaper this weekend

 

[visiting guest]

.
can i use someone's valid 25% off coupon code please ?

i thought they had no 25% currently running .
but a guy in front of me today at harbor freight had a valid 25% off,
but he would not share the code .

 

[airshow]

I can't seem to get the barcode to attach but it is 57061975 and it is on-sale now.

http://www.harborfreight.com/26-in-16-Drawer-Glossy-Red-Roller-Cabinet-Combo-67831.html

couldn't resist....bought one to go along with my HF44 and side box

 

[a52-830]

.
can i use someone's valid 25% off coupon code please ?

i thought they had no 25% currently running .
but a guy in front of me today at harbor freight had a valid 25% off,
but he would not share the code .

it is my impression that there are hf "employee friends and family" codes. it is my impression that they are single use.

maybe this was one of those.

 

[visiting guest]

it is my impression that there are hf "employee friends and family" codes. it is my impression that they are single use.

maybe this was one of those.

it was a single page out of a magazine like you have always seen (glossy) ... he also used a DMM coupon .

and the lady gave him the sheet right back

i think i will check car and driver magazine at supermarket and flip through it each visit and write down any 25% code if the magazine has one

 

[unslow1]

I just picked up a 12ft corded 12/6V tester and red meter for $2.58 out the door.
The tester was an unmarked $2.97. A pair of coupons 20% and free test meter. I think that is such a great deal I'm going back for another pair. I was ready to pay the shelf price. #43700


http://www.harborfreight.com/extra-long-circuit-tester-43700.html

 

[Rustyg80]

Are there any coupons for 12" miter saw. I know it will be on 3 day sale in the middle of next month for $139, but I have a use for it now. TIA

 

[unslow1]

Are there any coupons for 12" miter saw. I know it will be on 3 day sale in the middle of next month for $139, but I have a use for it now. TIA

In the monthly booklet there is a coupon for $137.97 good until 9/20. code 47308650 I'm not where I can copy it. If the the code doesn't help maybe someone can scan it.

 

[Rustyg80]

In the monthly booklet there is a coupon for $137.97 good until 9/20. code 47308650 I'm not where I can copy it. If the the code doesn't help maybe someone can scan it.

Thank you

 

[leftyz]

Are there any coupons for 12" miter saw. I know it will be on 3 day sale in the middle of next month for $139, but I have a use for it now. TIA

Heres one for $134.99

 

[BD1]

Does anyone have the current FREE 18'' magnetic tool holder coupon ? I did get one and it works so well for holding small drill bits I would like another. THANKS.

 

[leftyz]

Does anyone have the current FREE 18'' magnetic tool holder coupon ? I did get one and it works so well for holding small drill bits I would like another. THANKS.

not free...

 

[SuperCheyenne]

What's the best way to purchase a Daytona 3 ton floor jack?
http://www.harborfreight.com/automo...sional-steel-floor-jack-super-duty-63183.html

You experts know the % off coupons always exclude floor jacks.

 

[leftyz]

What's the best way to purchase a Daytona 3 ton floor jack?
http://www.harborfreight.com/automo...sional-steel-floor-jack-super-duty-63183.html

You experts know the % off coupons always exclude floor jacks.

Nice jack, never seen a coupon for it though.

 

[Dugan]

Anyone have the Portable Welding table coupon?

 

[leftyz]

Anyone have the Portable Welding table coupon?

 

[KaHuNaZ]

Anyone have a current printable 20% off coupon?

 

[leftyz]

Anyone have a current printable 20% off coupon?

Go to www.hfqpdb.com

 

[gamp945]

Anyone have a current printable 20% off coupon?

http://www.harborfreight.com/digitalsavings.html

 

[Pasha]

This is the best HF coupon source that I know of. If I'm not mistaken, it contains all their current coupons. It's updated on a regular basis. It has 20% coupons that are good for the rest of the year, just print off a few pages and you're good for the year

http://www.hfqpdb.com/

 

[leftyz]

It definitely doesn't have all the current coupons, I don't have time to upload that many! I do get some help but hf puts out hundreds of coupons per month, just too many to keep up with..

Sent from my SGH-M919 using Tapatalk

 

[mdbeck1]

Anyone have a current printable 20% off coupon?

There's always one here:
http://www.hfqpdb.com/

LeftyZ made that possible.

 

[CNGsaves]

^ ^ ^ +1. All GJer's owe a shout out of THANKS to Leftyz for
. . . . the AWESOME work he's done on the Harbor Freight coupon database !!

Thanks again Leftyz !!!

 

[leftyz]

^ ^ ^ +1. All GJer's owe a shout out of THANKS to Leftyz for
. . . . the AWESOME work he's done on the Harbor Freight coupon database !!

Thanks again Leftyz !!!

No Problemo! Send me a beer via paypal if you saved hundreds of dollars

 

[mdbeck1]

No Problemo! Send me a beer via paypal if you saved hundreds of dollars

I don't know about saving "hundreds" but I've got your website saved in my phone's browser. I usually just pull up a 20% off coupon before I go to the register. So I've probably saved $20 or $30 since you started the database.

 

[Bob Heine]

I'm heading to HF today to buy the 2-ton low profile floor jack. I'm saving $20 with a coupon from LeftyZ's database. Thanks LeftyZ

 

[Wyoming09]

I always try here first:

http://www.hfqpdb.com/

Harbor Freight Tools Coupon Database

I see I'm late to the party.

 

[leftyz]

:-D

Sent from my SGH-M919 using Tapatalk

 

[Andy Griffith]

Anybody know if there are super coupons for the 18 x 12 movers dolly?

I seem to recall getting some earlier this year for ~ $8 and I need some more.

I checked lefty's website and didn't see any. And I can't find my monthly mailing from HF.

http://www.harborfreight.com/18-in-x-12-in-1000-lb-capacity-hardwood-dolly-63095.html

Thanks

 

[leftyz]

Anybody know if there are super coupons for the 18 x 12 movers dolly?

I seem to recall getting some earlier this year for ~ $8 and I need some more.

I checked lefty's website and didn't see any. And I can't find my monthly mailing from HF.

http://www.harborfreight.com/18-in-x-12-in-1000-lb-capacity-hardwood-dolly-63095.html

Thanks

Did you try using the coupon search tool on hfqpdb.com ?

 

[Andy Griffith]

Did you try using the coupon search tool on hfqpdb.com ?

I did. #63095, no joy.

It took me to a google results page with the first entry from progressive farmer and a copy of the June 2016 coupon for $7.99.

 

[FatFenderBowTie]

Found one

 

[leftyz]

I did. #63095, no joy.

It took me to a google results page with the first entry from progressive farmer and a copy of the June 2016 coupon for $7.99.

yeah you just needed to try a few more of the results.

http://nwclipper.com/coupons/160806/Harbor_Freight~160806~01~15~01.pdf has one good through November.

 

[leftyz]

I did. #63095, no joy.

It took me to a google results page with the first entry from progressive farmer and a copy of the June 2016 coupon for $7.99.

and actually that coupon you found is perfectly valid ?

 

[visiting guest]

have you seen a 25% off coupon
inside any magazines ?

what magazine was it ?

i found plenty of car magazines with 20%.
but looking for a 25% coupon based magazine

 

[Andy Griffith]

Found one

Thanks.

yeah you just needed to try a few more of the results.

http://nwclipper.com/coupons/160806/Harbor_Freight~160806~01~15~01.pdf has one good through November.

Ahh, good learning process for me. Thanks

and actually that coupon you found is perfectly valid ?

It might have been but I could neither zoom in enough to see the expiry date nor get a clear print-out of the coupon with expiration date intact.

Thanks again.

 

[leftyz]

Once you get one you can zoom in on and see, I use "Snipping Tool" to crop out the coupon.

http://www.capture-screenshot.org/snipping-tool/

 

[ecotec]

I have never ever had to print out a coupon. Our local HF's take coupons on your phone. LeftyZ's coupons work every time. It is a link everyone should have.

 

[pedrodagr8]

I have never ever had to print out a coupon. Our local HF's take coupons on your phone. LeftyZ's coupons work every time. It is a link everyone should have.

Most don't even need that, they just ask for the number at the bottom.