derosa
Well-known member
Any coupons for the side cabinet with the drawers that fits the 44" could really use another.
Harbor Freight Coupon Thread
- Thread starter RbrtAWhyt
- Start date
flylow7f39
Well-known member
- Joined
- Oct 31, 2010
- Messages
- 358
No current coupon for 18", 7 DRAWER END CABINET Lot No. 69399/62580/68785 at http://www.hfqpdb.com
Bookmark www.hfqpdb.com and search for 62580 every now and then and one will show up eventually.
Any info on the matching top chest? I know it just went off, but was looking to pick one up this January.
https://www.harborfreight.com/power...ep-cut-variable-speed-band-saw-kit-63444.html
Dropped to $99.00 the other week and I picked one up. Its back up to $139.00 but it seems like a good saw for little money if you're looking to use a coupon.
Dropped to $99.00 the other week and I picked one up. Its back up to $139.00 but it seems like a good saw for little money if you're looking to use a coupon.
a52-830
Well-known member
does anyone know anything about the HF rolling bridge jack 94835?
http://images.harborfreight.com/manuals/94000-94999/94835.pdf
it seems to be gone. when did they last have it? was it that bad that they dropped it, or did it just not sell enough? how much was it?
thanx.
http://images.harborfreight.com/manuals/94000-94999/94835.pdf
it seems to be gone. when did they last have it? was it that bad that they dropped it, or did it just not sell enough? how much was it?
thanx.
I was behind a fella yesterday that wanted to use a coupon on a Bauer grinder and the cashier told him that in the small print it said the coupons didn't apply to the Bauer products. In her defense, she did look through two fliers looking for a better price for him!
flylow7f39
Well-known member
- Joined
- Oct 31, 2010
- Messages
- 358
Attachments
beelsr
Well-known member
it's something to be aware of with all the new "name brands" that HF is selling. Used to be, what, just welders, boxes and the trencher that were excluded. Now it's beginning to be like the end of a car commercial...
but humorously, welding stuff is now 20% off, permanently...
jacob.kirk1
New member
- Joined
- Dec 25, 2017
- Messages
- 1
I have the side car on my 44 and honestly I think it was a waste of money.
Just go for the 56 inch. The 44 is so shallow.
Sent from my Pixel XL using Tapatalk
DonkeyFluffer
Well-known member
- Joined
- Dec 17, 2016
- Messages
- 121
moreover
Well-known member
Im pretty sure im going to have to buy their HD Large Welding Cabinet 259.99 from $299.99. I looked it over today and it's very sturdy. Plan to house my Dynasty/cooler and WIA 150s MIG on it.
http://www.hfqpdb.com/best_coupon/COMMERCIAL+QUALITY+HEAVY+DUTY+WELDING+CABINET
http://www.hfqpdb.com/best_coupon/COMMERCIAL+QUALITY+HEAVY+DUTY+WELDING+CABINET
beelsr
Well-known member
No!!!!!!!!!
Vulcan is permanently 20% off since they issued a coupon that says "no expiration date". It's on the homepage of lefty's site. Use that instead and save $20.
$300 - $60 = $240
Out the $20 you save into new wheels and casters. And adjust a shelf (or take one out more likely) in order to get a helmet (or two) in there. But that's all probably discussed in a thread over in General Tools...
moreover
Well-known member
Whoa, thanks for the info on that 20%.
No!!!!!!!!!
Vulcan is permanently 20% off since they issued a coupon that says "no expiration date". It's on the homepage of lefty's site. Use that instead and save $20.
$300 - $60 = $240
Out the $20 you save into new wheels and casters. And adjust a shelf (or take one out more likely) in order to get a helmet (or two) in there. But that's all probably discussed in a thread over in General Tools...
Link to the thread in General Tools?
Fudge0514
Well-known member
The 90amp flux welder is on a new price of $79.97, no coupon needed. Not sure how long that price is good for, guess they are clearing out the Chicago Electric model?
bczygan
Well-known member
No!!!!!!!!!
Vulcan is permanently 20% off since they issued a coupon that says "no expiration date". It's on the homepage of lefty's site. Use that instead and save $20.
$300 - $60 = $240
Out the $20 you save into new wheels and casters. And adjust a shelf (or take one out more likely) in order to get a helmet (or two) in there. But that's all probably discussed in a thread over in General Tools...
Also note that you can use the Vulcan 20% coupon as well as a regular 20% coupon (On a different item), during the same visit.
Bill
beelsr
Well-known member
Dunno. Was just making the point that this is the deals thread/forum...
Of course! And don't forget the FWP coupon. I'm currently stocking up on tarps...
lafester
Well-known member
Thinking about picking up the 16pc Forstner bit set. Anyone know the history of these and if they go on sale very often? If not I'll just use the 20% off coupon.
beelsr
Well-known member
hfqpdb.com and do a search.
I know that when you buy it at whatever price, you should inspect it extra-carefully in the store. I remember at least one reviewer on it complaining of some bits being malformed, missing the cutting teeth.
lafester
Well-known member
Found that site earlier when I was doing my search. There was only one listed from 2015. Doesn't show any price changes and that only goes 30 days.
lafester
Well-known member
Well it's between these and the WEN 16pc set from HD. That set gets great reviews but I have to order it for pickup. Hard to inspect that way so I want to look at these first.
leftyz
Well-known member
Usually find those in wood working magazines, i haven't had a subscription to those i in a long time. You might look there
Sent from my ONEPLUS A5000 using Tapatalk
a52-830
Well-known member
has HF already discontinued the yukon all drawer storage option? i can't find it online, all that is listed now is the one big drawer with the cabinets below. . . . .
leftyz
Well-known member
a52-830
Well-known member
that didn't last long, even by our standards.
any idea why?
who makes them? torin (the people who make all the US General boxes)?
leftyz
Well-known member
I heard that they took too many sales from the US general boxes, but who knows.
New HF Coupon Policy ?????
I bought a Berger 400 amp ground clamp (63849) at HF today and submitted a 20% off coupon to be applied to the purchase. Upon leaving the store I noticed the 20% off coupon was not applied to the purchase. I asked the sales clerk about this and was told the 20% off coupon could not be used
for welders or any welding supplies. I was told that this was programmed
into the HF computers and that there was nothing she could do. I asked to
speak to the store manager and was told the same thing by her and that
there was nothing she could do. In the past I have purchased several of
these clamps and was always able to use a 20% coupon.
Has anybody else experienced this?
I bought a Berger 400 amp ground clamp (63849) at HF today and submitted a 20% off coupon to be applied to the purchase. Upon leaving the store I noticed the 20% off coupon was not applied to the purchase. I asked the sales clerk about this and was told the 20% off coupon could not be used
for welders or any welding supplies. I was told that this was programmed
into the HF computers and that there was nothing she could do. I asked to
speak to the store manager and was told the same thing by her and that
there was nothing she could do. In the past I have purchased several of
these clamps and was always able to use a 20% coupon.
Has anybody else experienced this?
"No expiration date"! Wow, that's a commitment for the life of the brand!
leftyz
Well-known member
You can use those on the welding cabinets too
Sent from my ONEPLUS A5000 using Tapatalk
Sent from my ONEPLUS A5000 using Tapatalk
a52-830
Well-known member
"Original coupon must be presented."
although it doesnt say surrendered . . . .
when they want to stop it, that is where they will go "sorry, the code isn't good enough.", " sorry, this is a copy/printout, not an original coupon".
The hftqpdb.com site is built on the premise that most people have no problem using photos of HF coupons on their phones. Because HF themselves sends out digital coupons, they can't make a rule against those, regardless of possible nitpicky ways to reinterpret the fine print.
I just always make sure to download the photo of the one I want to use from hftqpdb to my phone before going to the register; opening it in the gallery viewer lets you make it fill the screen better than in the browser, and it avoids the possibility of a cashier making a fuss about what website it's on (I heard of that happening to one person).
Acuratechva
Well-known member
Any Apache waterproof Case for 2018 anywhere?
polexican23
Banned
getting a rain check from my local HF is a nightmare and the store manager is an old fart that just hates life.
Tried to buy the 750 engine stand with my 25% coupon on the last day. They claim not to have any instock (cashier said they never have them). Finally got them to cave, not just waiting on them to go onsale to use the 25% coupon again.
Tried to buy the 750 engine stand with my 25% coupon on the last day. They claim not to have any instock (cashier said they never have them). Finally got them to cave, not just waiting on them to go onsale to use the 25% coupon again.
Motorman55
Well-known member
Like this? It's on their website now.
Attachments
Found it buried in the "What's New" page (instead of the regular coupons page), in a terrible format for posting coupons (clicking on it takes you to the product page; only mousing over it shows the full size temporarily). Managed to snag the link to the full-size version. Unfortunately it doesn't include the one with the swivel jaws I was interested in, but just about every other model is there.
https://images.harborfreight.com/hftweb/newitems/Locking_Pliers_NewItems_020118.png
leftyz
Well-known member
Are they excluded from 20pct off? Can't remember
Sent from my ONEPLUS A5000 using Tapatalk