Ford52PU
Well-known member
"It's going to be busy here for a while!"
When arent you busy!!
When arent you busy!!
Above 1200 Sq/FT Harley Jim's place
- Thread starter harley jim
- Start date
Wokspaces above 1200 squarefeet.
Bob Heine
ALLIANCE MEMBER
I see this turning into "I knew Jim when he was just getting started with trikes." A little trailer to carry groceries and I won't ever need/want an EV!
OP
harley jim
Well-known member
Ford 52, your right, but it just got kicked up a notch.
Bob, I bought a wagon from harbor freight and power coated it red to pull behind a trike but there was so many people I was afraid someone would trip over it, so I just left it at the tent.
I asked my wife if she was going to be ok being married to a tricycle king!
She just rolled her eyes.
It's a lot of fun but I don't see really big things happening.
Bob, I bought a wagon from harbor freight and power coated it red to pull behind a trike but there was so many people I was afraid someone would trip over it, so I just left it at the tent.
I asked my wife if she was going to be ok being married to a tricycle king!
She just rolled her eyes.
It's a lot of fun but I don't see really big things happening.
kaymccampbell
Well-known member
Put a plow marker with a 12x18 US flag on each corner of the wagon. Make it about eye level. Bottom at 5', top at 6'. That'll catch most of them. Laugh at the rest.Ford 52, your right, but it just got kicked up a notch.
Bob, I bought a wagon from harbor freight and power coated it red to pull behind a trike but there was so many people I was afraid someone would trip over it, so I just left it at the tent.
I asked my wife if she was going to be ok being married to a tricycle king!
She just rolled her eyes.
It's a lot of fun but I don't see really big things happening.
OP
harley jim
Well-known member
Kay, normal people would see it, one of the big swap meets here banned trailers now because some woman fell over a wagon loaded with car parts so I think I need flashing rotating lights and a back up alarm to go with the flags!
OP
harley jim
Well-known member
Back to ping pong life.
I got a bunch of little details done today.
We bought this desk and the front center was open so I made a center panel, I used red mahogany stain but it's still to brown so I went over it with cherry and still no Bueno!
Back to the shop tomorrow! Our steel load is in Birchwood so I leave at 7:30 tomorrow to go get it. Back by 10:30 if I'm lucky! Start cutting by 11:00!
I got a bunch of little details done today.
We bought this desk and the front center was open so I made a center panel, I used red mahogany stain but it's still to brown so I went over it with cherry and still no Bueno!
Back to the shop tomorrow! Our steel load is in Birchwood so I leave at 7:30 tomorrow to go get it. Back by 10:30 if I'm lucky! Start cutting by 11:00!
georgiadave
Well-known member
The guy who makes something always sees the faults. Looks good to me.
OP
harley jim
Well-known member
Thanks Dave, that's the problem!
Got the steel back to the shop, Donnie cut a pile of parts today, I went back to the lodge.
he going to deliver music carts to Tn. Tech in Cookeville tomorrow and I'm going to clean and inspect parts!
Got the steel back to the shop, Donnie cut a pile of parts today, I went back to the lodge.
he going to deliver music carts to Tn. Tech in Cookeville tomorrow and I'm going to clean and inspect parts!
Grizz1963
Well-known member
Love these trikes.
Of course living here on Mud Island means restricting every move we make.
Now the motorways are being weaponised with cameras to look inside your car to prosecute for mobile phones, kids not strapped in etc.
Of course living here on Mud Island means restricting every move we make.
Now the motorways are being weaponised with cameras to look inside your car to prosecute for mobile phones, kids not strapped in etc.
kaymccampbell
Well-known member
These are not bad things. Wish we had a bit more of that here. And before y'all go off. After you've been hit by drivers with mobile phones, fighting with unsecured children, reading a newspaper, applying cosmetics, spanking it, driving with feet, you'd be in favor, too,
Grizz1963
Well-known member
My response is 50/50 to your comment.
I become red hot and militant with anger in both directions of the argument.
But, the level of invasion of privacy by call it whatever you want, AI, Government, Private individuals eyc, to me, is beyond acceptable.
So I will retain my beliefs over here and absolutely respect yours living where you do.
kaymccampbell
Well-known member
I fully understand. I'm torn.
My response is 50/50 to your comment.
I become red hot and militant with anger in both directions of the argument.
But, the level of invasion of privacy by call it whatever you want, AI, Government, Private individuals eyc, to me, is beyond acceptable.
So I will retain my beliefs over here and absolutely respect yours living where you do.
As a very private person, I hate the invasion of privacy.
As a driver, I hate losing cars and money to acephalic assholes with licenses.
What's a girl to do?
I believe that while on the road, you're in the public eye, so there's no expectation of privacy. Violate away. After all, you choose to be there.
On the other hand, once you enter your property, your right to privacy should be inviolable. And if, by some chance, others, whether public or private, do violate that sacred bubble, they should be prosecuted to the fullest extent of the law with no exclusions. Hanging is too good for them.
LeonardY
Well-known member
We had to ban them at Disney parks. Strollers are ok and so are some double strollers.
OP
harley jim
Well-known member
Back to the lodge this weekend.
When there's heavy lifting the men show up from several lodges to help, there were five different lodges showed up Saturday and moved the pews back in, we sorted junk that had been stored for years, then set up the tables and chairs in the kitchen. I started loading my tools into my truck. Almost done!
When there's heavy lifting the men show up from several lodges to help, there were five different lodges showed up Saturday and moved the pews back in, we sorted junk that had been stored for years, then set up the tables and chairs in the kitchen. I started loading my tools into my truck. Almost done!
Bob Heine
ALLIANCE MEMBER
Jim, lest we forget, this is what you started with when the water leak ruined the carpet:
OP
harley jim
Well-known member
Almost finished, our official visit is this Friday at 6:00 pm! I'll be carrying tools out the back door at 5:30!
We have several more orders for trikes, a couple of them are turn key so I'm going about 13 hours a day right now! See y'all soon.
OP
harley jim
Well-known member
The East
The West
The South
The Secretary's Desk, my spot.
The Treasure's Desk
The Room
The Food and the fellowship.
Friday was a long day, 16.5 hours at the lodge! We hauled all of my tools back home, four truck loads, cleaned and fussed over the details. There were about 40 people that attended dinner and 29 Master Mason that attended the Official visit, we did very well, I won't know our final grade for about a week, but I'm proud of what we did.
I went to Donnies on Saturday to work on trikes but we were both not into it so we went to harbor freight and bought a new welder cart and a two wheel cart, then we went to Alex's to check out his new Miller 411 mig welder and to borrow his old 411 to use at our shop! After running a couple of beads with the new 411 we told him we didn't need to borrow the old one, we went home and bought our own, it will be here Wednesday.
We also ordered two Miller infinity 2.0 helmets so we can both weld.
Then I went home and crashed and burned, it's 11:00 Sunday and I haven't moved out of my chair yet, not even had breakfast yet!
Tomorrow is a new day, we'll get back to trike building.
Our order of trikes going to Kentucky got delayed until maybe Tuesday, due to the tropical storm we can't get to our meeting place until then, we hope.
OP
harley jim
Well-known member
It got a little rough here but we survived, still raining but we're ok
OP
harley jim
Well-known member
Got this one started, the man is coming Friday to pick it up and take it home, he is going to do some custom work on it then bring it back for us to finish.
Another man is picking up two frames Friday evening.
Delivering seven frames to Knoxville tomorrow morning.
It's getting busy here!
Hellpig
Well-known member
Did you see the two Harvard students who took the Meta Smart glasses, reprogrammed them, and now they just need to look at your face to ID you, get your address, and TONS of other info?
A stalker's dream....
Someone Put Facial Recognition Tech onto Meta's Smart Glasses to Instantly Dox Strangers
The technology, which marries Meta’s smart Ray Ban glasses with the facial recognition service Pimeyes and some other tools, lets someone automatically go from face, to name, to phone number, and home address.
www.404media.co
Last edited:
kaymccampbell
Well-known member
And what's to stop you from buying your own **** Tracy spy goggles and stalking your stalker right back?
Having played with facial recognition on a commercial basis, I'd like to see them try that with me. I believe their results might be... incongruous, yeah, let's go with that.
Hellpig
Well-known member
Not worried about me.
Worried about my daughters, my granddaughters, and millions of other vulnerable people.
But as long as you're cool with it...
kaymccampbell
Well-known member
I'm not cool with it. But, in this technological age, where every ******* and his inbred brother can get their hands on the tech they want to commit the acts no one wants, you have to fight back.
I've had two stalkers in my day. I was not pleased. They were dealt with.
Hellpig
Well-known member
We now resume your regularly scheduled Harley Jim thread.
Sorry for the derail Jim.
xtremek
Well-known member
That's a **** load of trikes. The lodge looks really nice.
The lodge looks really nice.LeonardY
Well-known member
Jim,
I have a special request. I would really appreciate if you could add a couple of Enterprises orbiting Earth.
I have a special request. I would really appreciate if you could add a couple of Enterprises orbiting Earth.
OP
harley jim
Well-known member
We got all of them delivered!
Sold one more yesterday.
Going to get back to building stock back, going to Panama city Nov 6th,
Kirk it's crazy busy right now, Florida should be the last show for this year, then we should get a break.
Lenny that would be funny! I'll see what I can do!
Sold one more yesterday.
Going to get back to building stock back, going to Panama city Nov 6th,
Kirk it's crazy busy right now, Florida should be the last show for this year, then we should get a break.
Lenny that would be funny! I'll see what I can do!
OP
harley jim
Well-known member
Woo Hoo! My new helmet showed up today! Sure is a big step up from the old one.
scooterbum46
Well-known member
I've got an older Digital Elite, love the hood and lens, hate the headgear (fat head I guess). Looked at a new one, maybe I'll see if the headgear would fit mine, I tried one on at it was better than mine..
Woo Hoo! My new helmet showed up today! Sure is a big step up from the old one.
kaymccampbell
Well-known member
Daft Punk.
Woo Hoo! My new helmet showed up today! Sure is a big step up from the old one.
Ford52PU
Well-known member
Darth Welder Vader!!
OP
harley jim
Well-known member
This one came with an accessory bonus piece that clipped to the top center of the headgear it looks like a cross. I tried it both ways and I like the piece, I left it in. I'm sure I will be adjusting it for the next six months!
OP
harley jim
Well-known member
It's pretty cool that you don't really notice any change in the light level when you start welding.
xtremek
Well-known member
I was almost on the same exact page you are. I mind went to Dark Vader. Great minds think alike.
kaymccampbell
Well-known member
He must be welding zinc or cadmium plate.
OP
harley jim
Well-known member
That's me!
We kicked it in the **** today, we converted the bender from an air cylinder to a hydraulic/electric set up, it will run 3 to 4 times faster than it did! So Donnie started bending rear hoops.
while I cut rear bumpers. We have enough to build 36 units so we ordered enough stock to build 30 more, we're hoping that will get us into next year. The new welder is scheduled to be delivered tomorrow so we're hoping to be ready to build frames early next week.
I'm ordering materials to put the front porch on the cabin tomorrow, hopefully I can have everything here by the weekend. I would like to get it framed up and get the roof on it Saturday and Sunday!
The door that the builder installed is less than 6 ft. and I bump my head so I bought this door to solve that problem. got it for 50 bucks on marketplace, Im going to put the screen door on my basement door.
I have been gathering supplies for the cabin for a couple of years now so I have most of what I need to build it, I haven't bought anything for the walls and ceiling yet, I can't decide what I want the finish to be yet.
We kicked it in the **** today, we converted the bender from an air cylinder to a hydraulic/electric set up, it will run 3 to 4 times faster than it did! So Donnie started bending rear hoops.
while I cut rear bumpers. We have enough to build 36 units so we ordered enough stock to build 30 more, we're hoping that will get us into next year. The new welder is scheduled to be delivered tomorrow so we're hoping to be ready to build frames early next week.
I'm ordering materials to put the front porch on the cabin tomorrow, hopefully I can have everything here by the weekend. I would like to get it framed up and get the roof on it Saturday and Sunday!
The door that the builder installed is less than 6 ft. and I bump my head so I bought this door to solve that problem. got it for 50 bucks on marketplace, Im going to put the screen door on my basement door.
I have been gathering supplies for the cabin for a couple of years now so I have most of what I need to build it, I haven't bought anything for the walls and ceiling yet, I can't decide what I want the finish to be yet.
Grizz1963
Well-known member
I love the production line system.
Door is lovely
Door is lovely