Old Man Roger
Well-known member
Ok, I think I see it now. Looking at the lower rear part of the purple frame, some of the parts I though were long continuous parts are short welded parts.
Above 1200 Sq/FT Harley Jim's place
- Thread starter harley jim
- Start date
Wokspaces above 1200 squarefeet.
larry4406
Well-known member
We were confused as bucket said corn.
OP
harley jim
Well-known member
Recycled bucket Larry, 
pistnbroke
Member
Seen this and thought of you Jim
Michael B.
Well-known member
I think Jim’s trikes are faster
BuffettFan
Well-known member
I believe that a Happy Birthday is in order for you today, Jim.
Happy Birthday!
Hope you have a great day!
Happy Birthday!
Hope you have a great day!
xtremek
Well-known member
Happy B'day HJ.
Old Man Roger
Well-known member
I’m glad Jim was born.
Lou's Garage
Well-known member
Happy Birthday!
bugnut
ALLIANCE MEMBER
Hey Jim, happy birthday!
Jayman17
Well-known member
Happy BD to HJ! 
OP
harley jim
Well-known member
I’m glad Jim was born.
Guys, I thank you so much for even thinking about me. I have the best friends in the world.Happy BD to HJ!
OP
harley jim
Well-known member
See what my neighbors got me for my birthday
Got a few trike frames finished, I wish the pics looked like they do in person. They are really sharp.
Jayman17
Well-known member
I think they should have gotten you the industrial sized container instead, I imagine that doesn't feel so good when you bend your finger. 
Old Man Roger
Well-known member
OOH Shiny!
See what my neighbors got me for my birthday
Got a few trike frames finished, I wish the pics looked like they do in person. They are really sharp.
OP
harley jim
Well-known member
Jayman, it is pretty stiff, Im going to see my Doc in the morning, the stitches are due to come out today and it's still bleeding!
Roger, it's really nice hand cream, I am using it!
Roger, it's really nice hand cream, I am using it!
kaymccampbell
Well-known member
Good luck at the doc.
OP
harley jim
Well-known member
Thanks Kay, it's probably my fault! Something I didn't do the right way!
LeonardY
Well-known member
Old Man Roger
Well-known member
I quoted the whole post, and I was referring to the metal flake, but for some reason it just posted your hand.lol
OP
harley jim
Well-known member
And I thought you were concerned about me! 
Yes, it's sparkly!
Thanks Leonard!
Went to the Doc, he wasn't happy, he said my finger wasn't repaired correctly, so I had to go see a surgeon! He did a little cutting and taping, he said he didn't want to stich it again because it would just tear out again. Got two more antibiotics, it's not infected but this is how they treat people with replacement knees.
Yes, it's sparkly!
Thanks Leonard!
Went to the Doc, he wasn't happy, he said my finger wasn't repaired correctly, so I had to go see a surgeon! He did a little cutting and taping, he said he didn't want to stich it again because it would just tear out again. Got two more antibiotics, it's not infected but this is how they treat people with replacement knees.
Old Man Roger
Well-known member
Maybe it isn’t healing well cause you never stopped using it? Just guessing.lol
OP
harley jim
Well-known member
Yes, Im sure that didn't help, I tried to sit still but that just dont work, some of the sutures were not in the skin allowing it to open, four of them came out on there own. Not blaming the ER, it's hard to stich shreaded skin back together.
So today I'm sitting in front of the press, bending tiny parts with my right hand!
Thinking about going to look at an old coke machine and a drill press on marketplace!
So today I'm sitting in front of the press, bending tiny parts with my right hand!
Thinking about going to look at an old coke machine and a drill press on marketplace!
kaymccampbell
Well-known member
You're incorrigible.
Prospecter
Well-known member
I know from experience that sometimes it is better to keep parts moving, rather than let them seize up. Likely you know this from your knee replacement experiences.
OP
harley jim
Well-known member
Kay, thank you! I think, lol.
Prospector, yes, if i sit for a day my artist takes over and it takes me forever to get going again.
Prospector, yes, if i sit for a day my artist takes over and it takes me forever to get going again.
OP
harley jim
Well-known member
We took it easy today, I sat at the press and bent fork tabs for a long time. Donnie wanted to build a die table, so he cut out the pans and I welded them together while he cut the legs, then we tag teamed it together. It's 30"Lx 14"Wx 30"H, there are three shelves with 1½" lips, and just for Shorty, it got casters. Then I came home and mowed the lake! I mean lawn. Now I'm sitting in a recliner with ice packs on my hands! Didn't get a response from the drill press, going to go get the coke machine tomorrow!
larry4406
Well-known member
Heal quickly my friend and follow the doc's orders!
I've always wanted a coke machine! Please keep us posted!
OP
harley jim
Well-known member
I took Pat to Ringold Ga. Today, the beets were ready at Brown produce, and she wants to get started with her canning! We got two cases.
Came home and built a trike.
The Lady text me and said to come and get the coke machine, but she wouldn't be there, I would have to deal with her husband, Jonithan!
So I called him and we agreed on 5:00.
He said this was a flip house and if I saw anything else I wanted just speak up.
He had the machine plugged in and it was working.
All of the seals are like new.
It had the key and lock insert with the key inside, so all of the important parts were there.
Then I spotted this cabinet in the garage.
It's completely full of treasures.
As we pulled it from under the bench, this AU-VE-CO box was on top of it.
It's a Chevrolet interior trim screw box.
It's dated 1950,
So I got all three pieces for $100 dollars!
The finger is good the redness and swelling are going down, it's starting to close up a bit. I'm keeping butterfly tape on it to help.
It was a busy day, time to rest!
Came home and built a trike.
The Lady text me and said to come and get the coke machine, but she wouldn't be there, I would have to deal with her husband, Jonithan!
So I called him and we agreed on 5:00.
He said this was a flip house and if I saw anything else I wanted just speak up.
He had the machine plugged in and it was working.
All of the seals are like new.
It had the key and lock insert with the key inside, so all of the important parts were there.
Then I spotted this cabinet in the garage.
It's completely full of treasures.
As we pulled it from under the bench, this AU-VE-CO box was on top of it.
It's a Chevrolet interior trim screw box.
It's dated 1950,
So I got all three pieces for $100 dollars!
The finger is good the redness and swelling are going down, it's starting to close up a bit. I'm keeping butterfly tape on it to help.
It was a busy day, time to rest!
OP
harley jim
Well-known member
Zanyad, Im excited to start on the coke machine, when I was a little guy, (back then they called me little Honda Jim) we had the same machine at our church, just another piece of the memories!
Tony, it's getting better,
Thanks for the "you ****" it means a lot!
Mr.zippy, Im having a lot of fun with my finger. When people ask what happened, I hold it up and point it at them and say " I told my wife to get the work done" and she bit it!
going to put the trusses up on the bil's garage. Its not raining so hopfully we can get something done today. These trusses have been sitting here for two weeks.
Tony, it's getting better,
Thanks for the "you ****" it means a lot!
Mr.zippy, Im having a lot of fun with my finger. When people ask what happened, I hold it up and point it at them and say " I told my wife to get the work done" and she bit it!
going to put the trusses up on the bil's garage. Its not raining so hopfully we can get something done today. These trusses have been sitting here for two weeks.
OP
harley jim
Well-known member
View attachment 2333215
We did work on the bil's garage yesterday! The rain held off finally!
I kind of cheated, we built the first two trusses on the ground and sat them up with one of Donnies fork trucks.
Then we got cleaned up and went to O'REILLYS in Benton, it's a new store and they have started doing a monthly cruise in, so we went to support them.
I did sell some raffle tickets, were raffling a trike to be given away at our car show In September. It will be a trike of the winners choice from what stock is at the show, so the winner has there choice of gas or electric! We raised enough money last year to give the Boys and Girls club of the Ocoee region almost $4,000 dollars to buy Christmas for 107 families. We can do better!
OP
harley jim
Well-known member
Worked on the bil's garage today.
We got 11 trusses up, the weather started to turn so we started picking up tools.
A man called about making a trade for my old tahoe.
Pat and I rolled it back in 2013.
But this guy wanted it, so we made a deal and now he owns it and a 23 T bucket.
It has been bouncing around between owners for 20 years that I know of, me and the bil have owned it 2 or 3 times, maybe it will stay gone this time.
And I wound up with this. It's a 93, 350, automatic with cold air!
Don't know what I'm going to do with it but something will pop up!
We got 11 trusses up, the weather started to turn so we started picking up tools.
A man called about making a trade for my old tahoe.
Pat and I rolled it back in 2013.
But this guy wanted it, so we made a deal and now he owns it and a 23 T bucket.
It has been bouncing around between owners for 20 years that I know of, me and the bil have owned it 2 or 3 times, maybe it will stay gone this time.
And I wound up with this. It's a 93, 350, automatic with cold air!
Don't know what I'm going to do with it but something will pop up!
Prospecter
Well-known member
That fork truck is the perfect tool for those trusses. You guys are really moving on that garage!
Nice trade. Always nice to have a spare vehicle about.
Nice trade. Always nice to have a spare vehicle about.
OP
harley jim
Well-known member
If the dang rain would stop we would probably have it done.
OP
harley jim
Well-known member
Worked in the garden this morning, pulled weeds and cultivated around everything, it's still really wet. I picked lettuce, onions, and squash. I planted more radishes.
Got a tiny tomato!
I conquered my fears and went back to the shop and continued on the engine run stand. I got a bunch done but forgot to take pics.
Remember the safe!
I made an executive decision to open it and end the drama!
Actually I just want it out of my way so first it had to be opened.
So now we know! I was hurting to bad to continue so I quit for today. Tomorrow I'll look at the lock and determine what's next. I'm in a house cleaning mood so a bunch of stuff is going to go bye bye!
Got a tiny tomato!
I conquered my fears and went back to the shop and continued on the engine run stand. I got a bunch done but forgot to take pics.
Remember the safe!
I made an executive decision to open it and end the drama!
Actually I just want it out of my way so first it had to be opened.
So now we know! I was hurting to bad to continue so I quit for today. Tomorrow I'll look at the lock and determine what's next. I'm in a house cleaning mood so a bunch of stuff is going to go bye bye!
Old Man Roger
Well-known member
Geraldo Jim? Harley Geraldo?