Back from the dead...
I check this forum every day or two in hopes that there will be new pictures of German tools. Time to stop lurking, and start posting.
Hazet 2574-1 & 2574 - Valve tappet depressors. Used in conjunction with Hazet 2599 for the removal of valve adjustment shims, on VW and Audi Solid lifter motors. These two are not interchangeable.
Hazet 2574-1 & 2574 - Design of cylinder head changed in 1983(?), moving the valves farther apart in order to address a head cracking issue between the valves.
Hazet 2599 - Valve shim pliers. Used with the above, for the removal of valve adjustment shims on VW and Audi solid lifter motors.
Hazet 4560 - For hard diesel fuel injection lines at injection pump and injectors on IDI VW and Audi cars.
Hazet 4560 - For hard diesel fuel injection lines on IDI VW and Audi cars. This works like a charm... almost as if it were designed for the task.
Hazet 4555N - For Bosch IDI diesel injectors. 1/2" dr., deep, 27mm, 12pt., with recess for fuel overflow connections.
Hazet 4555N - I know it is hard to see, but this thing is beautifully machined. It should be - given what it cost.
Hazet 2593 - Used for the proper tensioning of 22mm suspension strut nuts on VW and Audi cars. 1/2" dr., 6 point.
Hazet 2593 - Mine is 6pt., others I've seen are 12pt., though the nuts are all 6pt.
Hazet 2593-1 - 7mm hex with plastic handle. Used with Hazet 2593 to torque suspension strut nuts to 52ft.lbs. (70Nm). I wish the handle was a little longer - though it doesn't really flex at this length.
Hazet 791-5 - Valve stem seal pliers. For "single" valve engines (not multi valve).
Hazet 791-5 - The business end. Grooved for traction on oily stem seals.
