Help identifying shelfing hardware for steel cabinet

[Carter240]

So I picked these steel cabinets up a couple years ago and they didn't come with any shelves. I can make the shelf but I am missing the little pegs that go in the walls of the cabinet though. Can anyone point me in the direction of where I could find these or what style they call them?

Best photo I have at the moment, I will get a better one if need be.

 

[nutjob]

Try here:
https://www.shelf-clips.com/

Kevin

 

[drivesitfar]

CARTER: is there a brand name on your cabinet?

 

[corvette43056]

You should be able to go to lowes in the shelving section they will have different sized ones plastic to metal

Sent from my SM-N960U using Tapatalk

 

[Carter240]

CARTER: is there a brand name on your cabinet?

There is not unfortunately, I think I may have found a match at the link above though, but I will try Lowe's first. I thought maybe there was a name for this specific style or something. Thanks for the suggestions!

 

[The Cobbler]

they look like these https://www.ebay.com/itm/Knape-Vogt...852469?hash=item4449ad0735:g:LXwAAOSwGYVdsMTY

if you get some measurements I have some I can check

 

[Carter240]

they look like these https://www.ebay.com/itm/Knape-Vogt...852469?hash=item4449ad0735:g:LXwAAOSwGYVdsMTY

if you get some measurements I have some I can check

Outside edge to outside edge is 1.5cm or 0.59"

 

[drivesitfar]

Carter: while there are many many types of shelving brackets or supports the ones the Cobbler posted an Ebay link might be my first choice to fill your holes. those are metal and there are plastic versions, but i'd prefer metal cause might be a little heavier duty in case you might load up a shelf a bit on the heavy side.

good luck

 

[Carter240]

Carter: while there are many many types of shelving brackets or supports the ones the Cobbler posted an Ebay link might be my first choice to fill your holes. those are metal and there are plastic versions, but i'd prefer metal cause might be a little heavier duty in case you might load up a shelf a bit on the heavy side.

good luck

I agree they look very close, I will have to order some and see. Thanks for the help everyone

 

[drivesitfar]

Most hardware stores carry them so go buy one or 4 and see if they work? Might be cheaper if shipping costs are involved.

Good luck

 

[The Cobbler]

the track clip spacing is the same as your measurements . my clips are not marked, but pretty sure you want knape & vogt 256 shelf clips

 

[The Cobbler]

any updates tot his thread?