So today I came into some credit on the truck, handed my impact back gun in and got 300pounds ($471) bought a few things and now have 230 pounds (360$) left so what should I get? I already have snap on sockets, screwdrivers, seal removers ratchets in all sizes (could use a flex head 3/8), pliers and files and a few other things so help me out what would you buy with 360$?
Help me spend snap on credit!
- Thread starter merbie
- Start date
Check the flyers. There are Christmas flyers that I know of and the monthly flyer. wait for a good buy one get one deal, or get something that is at least on sale. Use your good guy discount too.
Maybe wait until you need/want something.
Maybe wait until you need/want something.
wild cowboy
Banned
I would be smart and make sure I had the handful of things that Snap-On makes that truly are far better than anyone else. These items are rare, but you should certainly own all of them. Torx/Hex bits and easy outs come to mind, and some others will if I think about it for a while.
Schurkey
Well-known member
My go-to ratchet is the FHNF100. Very recommended.
https://store.snapon.com/Round-Head...ad-Swivel-Head-Soft-Grip-12-1-2--P648544.aspx
1950mercury
Well-known member
Locking extensions ,dead blow ball pein hammers, flank drive plus wrenches,semi deep chrome sockets, pick set, chisels are all top notch
I build engines professionally If that helps, so I do fine work no need for big tools or power tools so more along the hand tool route
logikal
Well-known member
Snap on sells the full line of fowler products which are excellent metrology tooling. Also I absolutely love their files. Bahco Portugal and absolutely fantastic after years of use.
Scout Driver
Well-known member
I'll help you out by adding flare wrenches to your list.
https://store.snapon.com/FLANK-DRIVE-174-FLARE-NUT-C629589.aspx
Scott
geojag
Well-known member
Snapon makes the best angle wrenches, if they are still available. The 30/60 degree (I think) wrenches are damn handy.
Wamsutta
Well-known member
That would be their 1/4 drive swivel sockets.
wild cowboy
Banned
impact or chrome?
wild cowboy
Banned
The Armstrong (Matco) locking extensions are as nice or nicer than the Snap-On, at substantially less money.
Wamsutta
Well-known member
chrome
So I was thinking I need some extensions so maybe a long 3/8 flex not that I really need it and a set of extensions what else?
just a noob
Well-known member
- Joined
- Oct 24, 2013
- Messages
- 261
The 3/8 drive Techangle torque wrench is nice if you want to spend that much.
Dirty Diesels
Well-known member
1950mercury
Well-known member
Once again you are wrong.. On the chrome extensions. I have a full set of Armstrong 1/4 locking extensions. The black release rusts on the Armstrong and sk. Were snap on is chromed and has not rusted. Other than the rust they are top notch
abvw
Well-known member
Ahem, nobody was asking for a cheaper alternative, so stop suggesting other brand in a looking-for-Snap-on thread.
Brownsfan
Well-known member
Pick tools. Long and short. The cotter pin puller. Best one ever. If you do any interior work get their panel removal tools. Ratcheting screwdriver. Multimeter. The 504d is in your credit price range. I have it and love it. Most here will say fluke is the best meter nd they are probably right but this.one is nice.
Which cotter pin puller are u talking about? Pics please
Sent from my iPhone 5s using Tapatalk
Brownsfan
Well-known member
This one here. Best one I have used. I use it for so much more. Its probably the most used tool I own. https://store.snapon.com/Cotter-Pin-Pullers-SGCP1BR-P646366.aspx
I was thinking the tech angle torque wrench since you build engines, then I saw someone else posted it. It is nice it does metric and standard conversions. It also measures the angle for when you torque to spec, and then have to go 90degrees. The light and the vibration are great. The colors of the light when you start to get close to the spec. If you go over it tells you by how much. The vibration is nice when you can't see the screen, due to obstruction.
Have you tried one of these? They are really nice for hand assembly work, as you can spin the knurled shaft with your thumb and forefinger, while holding the grip in your same hand. This puts alot less strain on your wrist and maintains control for delicate threads (aluminum/magnesium, etc). The shafts come in bit holders and square drives and the thing is built more like a swiss watch than a typical version of this tool.
Screwdriver, Ratcheting, Soft Grip, Stubby, Red (Stock#: SGDMRC11A)
http://buy1.snapon.com/catalog/item...roup_ID=681248&store=snapon-store&dir=catalog
They aren't really the kind of tool you'd pay full retail, unless you had it and appreciated its usefulnees. So, perfect for a credit purchase or gift
Screwdriver, Ratcheting, Soft Grip, Stubby, Red (Stock#: SGDMRC11A)
http://buy1.snapon.com/catalog/item...roup_ID=681248&store=snapon-store&dir=catalog
They aren't really the kind of tool you'd pay full retail, unless you had it and appreciated its usefulnees. So, perfect for a credit purchase or gift
Attachments
Nice recommendations keep em coming which ratchet do you guys find your using the most? I mean other than standard handle
Bigblue&Goldie
Well-known member
Has the BJP1 ball joint press been mentioned?
Sorry for the late update I ended up buying a 3/8 locking flex head ratchet, pick set, club hammer (gift) blue point interchangeable precision screwdriver set (gift) and a ratcheting screwdriver
n8n
Well-known member
enjoy! Do you need us to help spend any more of your money? I was going to suggest a SSDMR4B and a SSDMR1A.
abvw
Well-known member
Long and flex handles. The only regular length I use is the T72.