To avoid these ads, REGISTER NOW!

Here we go again..........

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Over the past 55+ years of playing with cars I've worked in all manner of garages and not garages.......including swapping a trans on snow covered ground. Oh the silly things we car guys do!!

Last year we moved from Wa. State to Central Tx and left behind a pretty nice garage that had served well for years of hot rod building, storage, and so on. Part of life's progression is to recognize that some things don't last forever, including interests and stuff. Part of the thought was to reduce the fleet and some of the acquired shop equipment that years of hobby craft had allowed. Preparatory to the move I sold off a welder, drill press, shop press, brake, slip rolls, 80 gallon high volume air compressor, boom lift, and on and on. Not a complete sell off, just lightening the load. The plan was to sell off a couple of the cars and see if I could learn to live within the confines of a "normal" 3 car garage. As the thread title implies.......................I'm apparently not very good at that!:(

After getting settled into the new (to us) house, neighborhood, and circle of new friends and acquaintances I think I'm just going to have to keep playing with cars..............it's what I do. No laments about all the equipment sold, I'm not as physically able to do that kind of fab work any more, so they served their purpose and have moved on to other hobbyists to cherish. My last build, a '32 Ford sedan, is in the paint jail now and won't need more than a good collection of hand tools and space to complete when it's released. There won't be another complete build, just maintenance and mild modification. To that end, we decided to add more garage space to the property.

Given the architectural constraints of a residential community (yes, many loathe HOAs, sometimes for good reason, but we're adults and knew what the consequences of our choices were ahead of time) the building will be stick construction with materials consistent with those of the main house. No metal building, no building down to a low budget, but up to a standard. And, truth be told, at my age I prefer certain comforts. Some can identify with that, others...........................oh well.

Without getting too wrapped up in detail at this point the footprint will be roughly 27 x 40, there will be a small patio-esque structure over the side man door. The back left corner will be enclosed to a 12 x 12 room to house the mower and the rest of the gardening detritus. Elsewhere on this site I've got a couple articles/reviews of a large tool box and metal cabinets from New Age products; those will be moved to the new structure. Like any others who have gone down this trail, I've considered a wide variety of options for layout and equipment. My choices won't suit everyone, but they are the best ones I know how to make for the circumstances I face. So.....let's get started with breaking ground and forming up for the pad. That's where we are today. How long will this take? The safe answer is.............longer than I want it to..........after that, I ain't setting any unrealistic expectations. Been there, done that, didn't buy the T-shirt.:bounce:
 

Attachments

  • P8010002a.JPG
    P8010002a.JPG
    143.9 KB · Views: 283
  • P8010004a.jpg
    P8010004a.jpg
    126.2 KB · Views: 284
  • P8030007a.jpg
    P8030007a.jpg
    135.3 KB · Views: 259
  • P8150010a.jpg
    P8150010a.jpg
    135.5 KB · Views: 251
  • P8160012a.jpg
    P8160012a.jpg
    138.9 KB · Views: 267
To avoid these ads, REGISTER NOW!
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Every once in awhile a happy surprise occurs. Yesterday morning at dawn the mud guys showed up, did a few last minute detail items on the forms and pretty soon big white trucks with rolling barrels and chutes started showing up. We got a pad laid! Now to see if we can get the framer going a bit earlier to take advantage.
 

Attachments

  • P8210003a.jpg
    P8210003a.jpg
    105.4 KB · Views: 187
  • P8210002a.JPG
    P8210002a.JPG
    137 KB · Views: 206
  • P8210001a.jpg
    P8210001a.jpg
    126.4 KB · Views: 196
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
So, here we are again a week later. Later last week the concrete guys showed up again to start forming up for the flatwork. They ended up leaving scheduling open at weeks end as some guy named Harvey was supposed to roll into town and create a bunch of problems. As it turned out he stayed more toward the coast south of us and only dumped a bunch of rain and a comparative bit of wind. The framers were originally scheduled to begin their part on Monday 8/27. With 100% predicted chance of rain for Monday the job was called off. Turned out that Harvey guy fooled everyone around here and decided to make a big mess of the lives of the poor folks in Houston instead, so late Monday we got our first material delivery. Bright and early this morning the framing crew got after it and by the end of the day we had exterior and interior walls done, the ceiling joists in, and prepped to start hanging rafters first thing tomorrow. Yahoo! If things go well might even get some sheathing done tomorrow as well. Can roofing be far behind? Just glad we got our building materials all locked in now.........suspect that supply lines will get tight once the water settles and repairs begin along the coast. Sad for those folks...........
 

Attachments

  • P8290011a.jpg
    P8290011a.jpg
    149.5 KB · Views: 272
  • P8290009a.jpg
    P8290009a.jpg
    145.4 KB · Views: 288
  • P8290003a.jpg
    P8290003a.jpg
    128 KB · Views: 210
  • P8280001a.jpg
    P8280001a.jpg
    110.8 KB · Views: 222
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
The sad reality for those folks further south is the storm hasn't gone away yet, and then there will be weeks of the insurance shuffle to deal with. The serious rebuilding is still a ways off so shouldn't have much of an impact on our little project.

Houston is almost 200 driving miles, a few less as the crow flies.
 
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Another day, and the boys just keep on doing their thing. Since they prepped for rafters before leaving yesterday, they got a good jump on it and within the first half hour got a good amount of the roof shape up. Of course, there are a lot of little things that don't make much exciting picture story and a good part of the day went toward those items. But by the end of the day all the rafters were set, the walls sheathed and wrapped, and the beginning of some of the fascia. Tomorrow will likely get the decking for the overhead in, then the roof sheathing and wrap. At least now the final shape is evident to most.
 

Attachments

  • P8300001a.jpg
    P8300001a.jpg
    143.4 KB · Views: 214
  • P8300005a.jpg
    P8300005a.jpg
    157.7 KB · Views: 223
  • P8300006a.jpg
    P8300006a.jpg
    144.9 KB · Views: 228
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
I can already see some serious thinking happening on the side porch during work breaks in the shop!

You sir sound experienced........:beer:

Just one question. Why have double garage doors instead of one longer one?

While the hurricane explanation is remotely reasonable, we're actually in a band where severe hurricane strikes are fairly uncommon (witness the pattern just demonstrated by Harvey). This is more a design choice. We're mostly emulating the styling of the house, where we have a stone clad gable end segment that sticks out on a couple of portions of the house front. It's not particularly evident in the angles that I've shot these pics, but the left side (facing the building) protrudes forward of the right side by just over 2 ft, it will be clad in stone from drive to peak. The right side will be stucco, perhaps with some TBD highlights. There will also be a wall like structure spanning the space between the house and the added garage to give the appearance of one large building rather than this garage being a stand alone, out building. Those decisions are a combination of meeting housing development design criteria and personal taste testing the limits while (in our opinion anyway) enhancing the curb appeal as well as providing function. The side "patio" at the man door is similarly designed to serve multi purposes. It would be difficult to explain/show here without getting more verbose than I wish (already am?) but it ties in with the larger patio on the back of the house with the idea that it could support overflow activity if we have a large gathering. There's even more to it than that (if you can believe it), but that's already more than you probably bargained for. While I'm a devoted car nut I recognize that not all future buyers of this property will be the same kind of nut, so I try to work in some design/function versatility for resale purposes.
 

dchance

Well-known member
Joined
Oct 3, 2016
Messages
614
Location
OKC
Looking forward to see the build and also the projects not the hot rods.

Dwight
 

MaximusD

Active member
Joined
Mar 27, 2017
Messages
29
Location
Montana
Very Nice, I am currently finishing a 34x36 with a very similar look. You have a beautiful place.
 
To avoid these ads, REGISTER NOW!
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Thanks for the comments guys, and welcome aboard Dave.

Okay, time to get back on track after being out of town for the long holiday weekend.

The fellas got all the sheathing and wrap done, most of the soffits and fascia, the posts and a few other things while I was gone. Only one small mistake made while I wasn't here to keep an eye on them, so not too bad. Meanwhile the concrete guys came and finished up the forming and steel work so they can be ready to pour tomorrow (Wednesday). Electrician showed up today so we got all the boxes in and began stringing wire, that should be wrapped up tomorrow. Plumber will be in tomorrow as well to get his rough in done, while the trim guys finish the work on the side porch and fix their goof up. Nice progress I'd say.
 

Attachments

  • P9050005a.jpg
    P9050005a.jpg
    150.6 KB · Views: 163
  • P9050004a.jpg
    P9050004a.jpg
    146.5 KB · Views: 168
  • P9050003a.JPG
    P9050003a.JPG
    128.8 KB · Views: 175
  • P9050002a.jpg
    P9050002a.jpg
    133.8 KB · Views: 192

vette66bob

Well-known member
Joined
Jun 3, 2009
Messages
168
Location
North Jersey
Very nice design and wonderful property. I am thinking of doing the same type of move. Downsizing, 40+ years of collecting cars, tools, an everything else. Tough decisions. I am overwhelmed with the amount of “stuff”. As you state life sometimes dictates some changes. Good luck I am looking forward to following your progress.
 
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Nice that you guys keep interest in what's going on here. While probably a bit fancier than just a "garage", in part because of our residential setting, it's far from a Garage-mahal.

Most of what happened today wasn't very photo worthy, but this one item does add some POP to the overhang of the man door. Will get a dark stain to enhance the bead board. If all goes well tomorrow we'll get a small ocean of concrete.
 

Attachments

  • P9050001a.jpg
    P9050001a.jpg
    108.5 KB · Views: 689

Finallygotit

ALLIANCE MEMBER
Joined
Jul 6, 2013
Messages
4,076
Location
Tucson, AZ
I can just picture this with some nice soft up-lighting hidden in some molding. But that's me............

attachment.php


:beer:
 
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
I can just picture this with some nice soft up-lighting hidden in some molding. But that's me............

:beer:

Well Dan, at least you didn't say "disco ball" (yes, I'm dating myself):lol:

So, at daybreak today the crew rolled in and stuff started happening. By mid morning the trucks with big drums lined up and 36 yards of mud later we be paved with driveway...................gotta love progress!
 

Attachments

  • P9060008a.JPG
    P9060008a.JPG
    140.6 KB · Views: 165
  • P9060007a.jpg
    P9060007a.jpg
    137.3 KB · Views: 154
  • P9060005a.jpg
    P9060005a.jpg
    149 KB · Views: 150
  • P9060004a.jpg
    P9060004a.jpg
    96.2 KB · Views: 147
  • P9060003a.jpg
    P9060003a.jpg
    125.9 KB · Views: 156

rubberrodder

Well-known member
Joined
Jul 6, 2007
Messages
616
Location
Tacomatose Wa.
Gosh, that looks nice. I can visualize a cool rod sitting out there, A healthy cammed flathead chugging away, waiting to go for a ride. Just before the HOA president comes over and says "turn that noisey sumbitch off!" :lol:
 
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Gosh, that looks nice. I can visualize a cool rod sitting out there, A healthy cammed flathead chugging away, waiting to go for a ride. Just before the HOA president comes over and says "turn that noisey sumbitch off!" :lol:

:):lol2: The former president has two hot rods of his own, and the current was one of the first to come over and do a meet and greet when he saw one of the cars in the drive when we first moved in.............. You're probably right though, there's always a crank **** somewhere!


wow,looks awesome i'm in ny(not city) couldn't imagine what that would cost around here.$$$$$$$

Zmotorsports, post #20, started a poll of his own recently on just that topic. Some interesting, and frankly some unbelievably low, numbers are bandied about. Just for reference, concrete here runs almost $100 a yard, that's just the material, not including labor to install.
 
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
I think we're making decent progress as not many hiccups in the scheduling.

Between Friday and Saturday we managed to get the rough in on plumbing, electrical and HVAC done, windows hung, some of the last of the exterior trim, and today the roofers showed up to get that done. Might see painters tomorrow to get after the fascia and maybe some of the staining. The insulation guy threw a small wrench in the works and pushed back from tomorrow to Thursday so drywall gets moved back to next week........boooo.
 

Attachments

  • P9110003a.jpg
    P9110003a.jpg
    146 KB · Views: 91
  • P9110006a.jpg
    P9110006a.jpg
    147.2 KB · Views: 88
  • P9110007a.jpg
    P9110007a.jpg
    114.1 KB · Views: 112
OP
U

Uncle Bob

Well-known member
Joined
May 20, 2005
Messages
70
Location
Salado, Tx
Not a lot of exciting pics here, but if you're familiar with a similar construction process there's actually more going on than the average eye can appreciate. I feel more compelled to post though because we are at one month since we broke ground. All things considered, I think we've made decent progress.

Yesterday the paint crew got the fascia and soffits painted. Today, the spray foam insulation in the roof area got done (tomorrow the walls), and the stucco crew got going on their prep. Again, not super exciting pics, but good progress none the less.
 

Attachments

  • P9130001a.jpg
    P9130001a.jpg
    126.7 KB · Views: 108
  • P9130003a.jpg
    P9130003a.jpg
    148.5 KB · Views: 98
  • P9130004a.jpg
    P9130004a.jpg
    143.6 KB · Views: 98

Matt Matt

Well-known member
Joined
May 11, 2017
Messages
523
Location
Ontario
Uncle Bob, I am subscribed. I would absolutely love to do what you're doing! I've done it once before, but I did it too small! I still have the property, but I have regrets.
 
Last edited:

GoldCar

Well-known member
Joined
Jul 26, 2015
Messages
109
Location
Alsace, France
Hi Uncle Bob,

Very nice and interesting projet. Suscribed !

Hope you show us the next steps and interior fittings.

GC
 
To avoid these ads, REGISTER NOW!
Top Bottom