To avoid these ads, REGISTER NOW!

HF Tire changer storage

Outlander

Well-known member
Joined
Jul 30, 2010
Messages
5,154
Location
Quebec, Canada
I have read all the threads, seen the trailer hitch mounts and have decided to install mine on a pallet. However, I do not have room to store it inside the garage, so it will end up outside, probably under the deck.

Covering it with plastic tarp can be accomplished...but....will it end up a rusty pole after the winter?

How about any 'quick connect' ideas? I don't / won't use it too often so maybe just biting the bullet and bolting it to the pallet when I need it is the best idea.
 
To avoid these ads, REGISTER NOW!

dodge610

Well-known member
Joined
Aug 22, 2010
Messages
5,467
Location
North Canton Ohio
Look on line for a product called fluid film and spray it down before you cover it I have had good luck with this seems to keep the corrision off most of the stuff I use it on.
 
To avoid these ads, REGISTER NOW!

Jarhead0408

Well-known member
Joined
Apr 1, 2012
Messages
5,828
Location
Who knows?
Find a plastic 55 gallon drum, cut one end off, and use it for a cover.

Man, some days the simplest answers blow me away. My HF changer is outside too. Less than 25' away I have a plastic 55 gallon barrel that already has the end cut off. Never occurred to me to use it. Of course, that might be becAuse I've been using it as a shop can. Thanks for the idea!
 
To avoid these ads, REGISTER NOW!
Top Bottom