To avoid these ads, REGISTER NOW!

Home Depot Clearance Thread 2015

Status
Not open for further replies.
C

cheechi

Well-known member
Joined
Feb 29, 2012
Messages
4,384
Location
Triad, NC
mswol767 said:
Guys grabbing the Empire 48" level.. make sure you take the time and check them out with batteries.. Im on my 2nd one and the digital display was not working.. my buddy same deal.. all different stores.
Click to expand...
Ironically I just discovered the same thing with mine. I bought the one with Vials made in USA, left the other. If another store nearby has another I will bring batts and try them out and maybe swap mine or just contact Empire and get it warrantied. Either way the novelty of it I might never use the display. I just need a decent 4ft level as a spare.

AmericanMechanic said:
Picked up a fish tape light but left the other behind. Figured I didn't really need 2.
Click to expand...
In addition to the fishtape light there are a few other Klein VDV tools on clearance. Scotchblock crimps, coax/eth strippers, punch tool/screwdriver ala 6 in 1 driver style, and a few other misc ones.

There are spools of RG6 double shielded copper clad steel for $8 and change. just the white. Maybe I'd buy store bought coax if it was quad shield, but for those that want it you can take a look out for it.

Don't remember exactly but the box of 5e was also clearanced out.
 
To avoid these ads, REGISTER NOW!
E

elronin

Well-known member
Joined
May 26, 2012
Messages
1,261
Location
Hialeah,Fl
Wow now I see where all the Milwaukee meters went to. This is a store on the west cost of Florida that I stopped by when I was on vacation.
 

Attachments

  • image.jpg
    image.jpg
    132.8 KB · Views: 281
Last edited:
J

JR4815D2

Well-known member
Joined
Jul 8, 2015
Messages
524
Location
___
The store I was in yesterday had a similar display for Milwaukee stuff. Then there was a movable rack with all the sale items for LED light bulbs to DeWalt saws.
 
E

elronin

Well-known member
Joined
May 26, 2012
Messages
1,261
Location
Hialeah,Fl
Anyone know what the bottom Husky blacked out tool chest 27 inch is going for now saw the tops for 25 bucks
 
J

jeopardy98

Well-known member
Joined
May 11, 2015
Messages
587
Location
Prince George, VA
elronin said:
Anyone know what the bottom Husky blacked out tool chest 27 inch is going for now saw the tops for 25 bucks
Click to expand...


$45.03 I just bought one last night. I wish I could have gotten a top but I think I'll either get the MBI top or just use my Sears Viper Pro 3 drawer on top of it.
 

Attachments

  • 20150904_200551.jpg
    20150904_200551.jpg
    126.3 KB · Views: 152
B

BMack37

Well-known member
Joined
Aug 28, 2015
Messages
1,091
elronin said:
Wow now I see where all the Milwaukee meters went to. This is a store on the west cost of Florida that I stopped by when I was on vacation.
Click to expand...

Mind if I ask which city/store? I'd love to pick up an extra meter
 
9

95m3ltw

Banned
Joined
Apr 9, 2013
Messages
268
Location
Georgia
Question about the Milwaukee clamp meter, bought 3 and just tested all three. When I select amps (first mode on the dial) and clamp it over a power cable, should I see amps even if .0x amps? To clarify, we are in the middle of remodeling our kitchen and have lots of exposed wiring. I've checked several with a load and nothing shows a reading. I put our electric oven on max temp and it showed 0.30 amps as I moved the clamp over the cable but once it had closed around the cable, it went to 0 in second or so.

I've never used a clamp meter but thought that was the point of the clamp function, show the current draw in the line it is clamped around. Instructions state such but just wanted to check with others with this meter
 
E

Engine

Well-known member
Joined
Jan 9, 2014
Messages
646
Location
Kentucky
95m3ltw said:
Question about the Milwaukee clamp meter, bought 3 and just tested all three. When I select amps (first mode on the dial) and clamp it over a power cable, should I see amps even if .0x amps? To clarify, we are in the middle of remodeling our kitchen and have lots of exposed wiring. I've checked several with a load and nothing shows a reading. I put our electric oven on max temp and it showed 0.30 amps as I moved the clamp over the cable but once it had closed around the cable, it went to 0 in second or so.

I've never used a clamp meter but thought that was the point of the clamp function, show the current draw in the line it is clamped around. Instructions state such but just wanted to check with others with this meter
Click to expand...

If the meter is working properly and you simply clamp it around a cable (sheathing containing multiple wires), it will display virtually zero current. When measuring current with a clamp meter the jaw goes around only 1 conductor at a time. This should give an accurate reading of the current.

See this youtube video on how to properly use the meter.
 
Last edited:
9

95m3ltw

Banned
Joined
Apr 9, 2013
Messages
268
Location
Georgia
Engine said:
If the meter is working properly and you simply clamp it around a cable (sheathing containing multiple wires), it will display virtually zero current. When measuring current with a clamp meter the jaw goes around only 1 conductor at a time. This should give an accurate reading of the current.

See this youtube video on how to properly use the meter.
Click to expand...

Thanks for the reply, I should have clarified my testing method, I was doing as described in the video. Testing again I do have two bad meters that read 0 with the clamp and about half voltage with the leads. The third meter does read correctly but I had it on the wrong mode last night so that brings the question, hoping I can get Milwaukee to repair/replace vs taking it back to home depot.
 
M

mrvm

Well-known member
Joined
Feb 12, 2014
Messages
3,839
Location
PA
Keep an eye on these Klein tools. Buy what you need before the resellers grab em

IMG_20150906_120627.jpg

IMG_20150906_120534.jpg

IMG_20150906_120617.jpg
 
W

Wanna Ride

Well-known member
Joined
Jul 28, 2010
Messages
2,790
Just bought a new portaband at my local HD yesterday and showed them the Rural King coupon for 12%, they offered it to me instantly.
 
T

Tmct

Well-known member
Joined
Jul 25, 2015
Messages
66
Location
CT
Went to the middletown and berlin store today. Middletown had no deals and berlin had 2 of the Bosch laser distance measure that I got.
 
To avoid these ads, REGISTER NOW!
B

BMack37

Well-known member
Joined
Aug 28, 2015
Messages
1,091
elronin said:
Naples
Click to expand...


Thanks!

Too bad it's too far of a drive to make sense. 5 hours drive time means I'd have to buy a couple extra to resell to make it worth it...and I'm not going to do that. Oh well, maybe that info helped another GJ member :thumbup:
 
S

SRMX

Well-known member
Joined
Apr 23, 2009
Messages
61
fourjeepin said:
Now there are discounts for Pros, Military, bulk, new mover, etc, but no employee discount. One discount that a lot of folks aren't aware of is 5% for using a HD credit card. This is like the discount at Target for their red card, except you have to ask for it at Depot.
Click to expand...


Good info, thx.

Can you stack the discounts? Like 10% for Pro & 5% for using the HD CC for a total of 15% or like 10% for Pro & 10% for military for a total of 20%?
 
S

Shiftless

Well-known member
Joined
Mar 9, 2014
Messages
14,532
Location
East Bay SFO
SRMX said:
Good info, thx.

Can you stack the discounts? Like 10% for Pro & 5% for using the HD CC for a total of 15% or like 10% for Pro & 10% for military for a total of 20%?
Click to expand...

Stores don't generally do it like that.
But here is what happened to me a long time ago when track lights were in fashion. A big box store was clearing out some high end Halo fixtures because the burnished brass was going out of style. They were marked 40 per cent off on the box but on the pallet it said 50 percent of lowest price. So the price I paid should have been 30 per cent of the original price, right? Originally 50 bucks each. So the cashier couldn't seem to do the math, and just added the two discounts and gave them to me for 90 percent off or 5 bucks each. I bought all they had.
 
J

JettaGetUpandGo

Well-known member
Joined
Jun 3, 2015
Messages
685
Location
Pewaukee, WI
mrvm said:
Keep an eye on these Klein tools. Buy what you need before the resellers grab em

IMG_20150906_120627.jpg
Click to expand...

I have that network tester. I think I paid full price for it a couple of years ago, but it was extremely handy wiring our home for network. At full price, a tone generator/tester would likely be a better investment, but I didn't know they even existed at the time. $13 is well worth it for the Klein.
 
S

Speedy!

Well-known member
Joined
Dec 23, 2014
Messages
271
Location
TN
Got some things I could use today. GLM40 finally dropped to $25.03 so grabbed one of those. Grabbed the Bessey vice for $7.53. Grabbed some new door mats for the garage for $2.83. Mats are 2'x3' Textures rubber mat original price $11.97. Sku is 226842.
 
F

fourjeepin

Well-known member
Joined
Feb 12, 2011
Messages
3,658
Location
Atlanta, GA
SRMX said:
Good info, thx.

Can you stack the discounts? Like 10% for Pro & 5% for using the HD CC for a total of 15% or like 10% for Pro & 10% for military for a total of 20%?
Click to expand...

I don't believe any of them stack, but know you can combine them with item discounts/coupons. The Pro discount is a small percentage, except for Pro Paint - it is very healthy.

I used to know all these details and have easy access to coupons, but my source in the marketing department left the company.
 
7

77Ford

Banned
Joined
May 22, 2014
Messages
973
87b4cd9bb28721f2f32be75b8c54ac84.jpg


Great Day.........[emoji14]
 
H

honda pc

Banned
Joined
Mar 8, 2015
Messages
429
AmericanMechanic said:
Just out of curiosity, what would one do with all those boxes?
Click to expand...

yeah...I was wondering that too... I saw these and found these to be not that useful for my purpose.. Now I do like that Ridgid ones which stack and rollaway....just as strong as the dewalt....
 
E

elronin

Well-known member
Joined
May 26, 2012
Messages
1,261
Location
Hialeah,Fl
77Ford you have to take a pick with all of your new and old boxes together in your garage I have to see that set up you have.
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom