To avoid these ads, REGISTER NOW!

Home Depot Clearance Thread 2015

Status
Not open for further replies.

nikon5400

Well-known member
Joined
Apr 10, 2015
Messages
167
Hmm. Where you from? I'll have to check my local store, but I know other nearby stores still had it and the blower at .03 today
blower is $80.03. I saw open box but didn't take it. it was missing everything and looked like it was used heavily. I believe someone else took it right after I put it back on floor
this is in Philadelphia
 
To avoid these ads, REGISTER NOW!

nikon5400

Well-known member
Joined
Apr 10, 2015
Messages
167
In my end computer said 0.01 for display of course no where to be found

Sent from my SM-G900V using Tapatalk
maybe mine was a display
I posted a picture of UPC code so you guys could compare
but the computer had two or three echo items on clearance this saw wasn't one of them
 
Last edited:

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
How did we miss these? Rochester. Black and Decker. If you're gonna reach for them, your best bet is to search "black decker"
ImageUploadedByTapatalk1445728385.565563.jpg
ImageUploadedByTapatalk1445728397.395779.jpg


Sent from my iPhone using Tapatalk
 

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
I don't think the nest stuff is clearance around here. Nothing good for me today. I will try and remember to post a picture of the energizer lights tomorrow.

Could have gotten a few of the water heaters but I don't know how well they would sell...

Sent from my iPhone using Tapatalk.
 

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
Echo chainsaws still .03 here


This. Just bought a refurb model. Had to get the price adjusted as they had it tagged with a generic SKU (no box or anything). Had to show them the app with the actual SKU for the saw.


Sent from my iPhone using Tapatalk.
 

mswol767

Well-known member
Joined
Aug 3, 2015
Messages
475
Location
Boston, MA
I don't think the nest stuff is clearance around here. Nothing good for me today. I will try and remember to post a picture of the energizer lights tomorrow.

Could have gotten a few of the water heaters but I don't know how well they would sell...

Sent from my iPhone using Tapatalk.


I'll look for nest more they are .03 but I feel like like they don't keep on the floor but locked up somewhere
 

Woboito13

Well-known member
Joined
Sep 5, 2015
Messages
109
Location
Inglewood, CA
I don't think the nest stuff is clearance around here. Nothing good for me today. I will try and remember to post a picture of the energizer lights tomorrow.

Could have gotten a few of the water heaters but I don't know how well they would sell...

Sent from my iPhone using Tapatalk.
Yeah there's a few of those water heaters but idk if they're gonna be a headache to sell.
 

kneeman

Well-known member
Joined
Mar 12, 2014
Messages
1,704
There are new nest displays in top stock for met teams. The old should be going to penny quick.

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

kunkernator

Well-known member
Joined
Sep 27, 2012
Messages
2,438
Location
US of A
Great deal on that chainsaw. I found the display model box up in the rafters, some accessories in it, but no chainsaw to be found :(


Sent from my iPhone using Tapatalk
 

MPOWERD

Well-known member
Joined
Jun 7, 2011
Messages
578
I have found that absolutely NONE of the items you list in this thread are ever at the prices shown at my local Home Depots, and we have 10 of them here...
 

sseiyah

Well-known member
Joined
Aug 31, 2015
Messages
147
I have found that absolutely NONE of the items you list in this thread are ever at the prices shown at my local Home Depots, and we have 10 of them here...
Finding these deals takes a lot of time and effort, using the computer etc to find out which stores have the stuff.

You are incorrect about the prices, many of the items here are national prices, however a few are store specific.
 
To avoid these ads, REGISTER NOW!

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
Finding these deals takes a lot of time and effort, using the computer etc to find out which stores have the stuff.



You are incorrect about the prices, many of the items here are national prices, however a few are store specific.


This. You should be able to find I would say atleast half of the items on the sheet.


Sent from my iPhone using Tapatalk.
 

nikon5400

Well-known member
Joined
Apr 10, 2015
Messages
167
Questions for experts -

1. If there's an item without a box (return or display, but not refurbished. no sku, no refurbished sku) and that item is a penny - is it customer's to keep or not
(assuming customer can provide a screenshot with matching picture and SKU)

2. If the item has a refurbished SKU (usually engraved on some handle:) ) and a green "was $***, now $**" sticker, while the non-refurbished SKU is a penny - what are the chances of getting it for a penny?

I understand both of the above are up to the store, but I wonder if there's an official HD policy on this. I contacted 800# 3 times in regards to penny items and one time rep didn't have any idea what I was talking about, so I had to hang up and redial. So my guess is the answers from 800# may vary.

I know there's a way around it by letting them charge you last clearance price and then contact corporate and get price adjustment, but I'd rather not go that far, plus store may use some other sku and that may turn into even more hassle.

Thanks
 

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
Questions for experts -

1. If there's an item without a box (return or display, but not refurbished. no sku, no refurbished sku) and that item is a penny - is it customer's to keep or not
(assuming customer can provide a screenshot with matching picture and SKU)

2. If the item has a refurbished SKU (usually engraved on some handle:) ) and a green "was $***, now $**" sticker, while the non-refurbished SKU is a penny - what are the chances of getting it for a penny?

I understand both of the above are up to the store, but I wonder if there's an official HD policy on this. I contacted 800# 3 times in regards to penny items and one time rep didn't have any idea what I was talking about, so I had to hang up and redial. So my guess is the answers from 800# may vary.

I know there's a way around it by letting them charge you last clearance price and then contact corporate and get price adjustment, but I'd rather not go that far, plus store may use some other sku and that may turn into even more hassle.

Thanks

1. Eh dunno. If there's no barcode to scan, they could always argue that it's for "store use"

2. Depends if the SKU is correct or if they used the generic SKU. If it's the generic SKU, you probably won't be able to get it for a penny, but if it's the right SKU, you should be able to get it.
 

Speedy!

Well-known member
Joined
Dec 23, 2014
Messages
271
Location
TN
I've seen stuff clearance on the store computer at one store and they have zero inventory. I see another store listed in the computer that has inventory so I drive over and the items is full retail price and not on clearance. You just have to wait for some luck some times. I've gotten several amazing deals as a result of this thread.

I need a pressure washer and looked high and low yesterday and no dice. Bummer.
 

sseiyah

Well-known member
Joined
Aug 31, 2015
Messages
147
I bought a display model and the tubes were nowhere to be found. I've read here that echo would send them. I called yesterday and they said all that was needed was to fax a copy of my receipt, serial number (to get the right parts), and which parts I'm missing. Let's see if it's really that simple
So how did this go? I bought a display yesterday missing the tubes as well.
 

Woboito13

Well-known member
Joined
Sep 5, 2015
Messages
109
Location
Inglewood, CA
So how did this go? I bought a display yesterday missing the tubes as well.

Haven't faxed in my stuff yet :lol_hitti I will do it tomorrow though. After I posted that, other people said they received an email from Echo saying their stuff was shipped and should be getting it within 5-7 days. Hope this helps! I'll update as I start my 'process.' :beer:
 

nikon5400

Well-known member
Joined
Apr 10, 2015
Messages
167
can someone who sold the 500t blower provide me a receipt?
I went back to the store where I left one yesterday its still there I picked it up its $0.01.
they gave it to me for free but there is no receipt so I cannot get parts and I don't want to search the whole area to find one in a box with the receipt. I want to try to use this thing to blow pool lines so will need it once a year

thanks a lot I appreciate it

P.S. computer still shows $80.03, rings up $0.01
 
Last edited:

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
can someone who sold the 500t blower provide me a receipt?
I went back to the store where I left one yesterday its still there I picked it up its $0.01.
they gave it to me for free but there is no receipt so I cannot get parts and I don't want to search the whole area to find one in a box with the receipt. I want to try to use this thing to blow pool lines so will need it once a year

thanks a lot I appreciate it


Pm sent


Sent from my iPhone using Tapatalk.
 
Last edited:

nikon5400

Well-known member
Joined
Apr 10, 2015
Messages
167
picked up this thing for free ( see below )
it wasnt even $0.01 in the system anymore
called 800 twice thinking it was a penny.
first csr said no way you're not getting it for $0.01 unless store decides to give it to you
called again - this one did not know that policy had to look it up. 10 minutes later manager came out and gave it to me
not a bad day
 
Last edited:

nikon5400

Well-known member
Joined
Apr 10, 2015
Messages
167
The computer/scan discrepancy is interesting...


Sent from my iPhone using Tapatalk.
customer service rep said something about some glitch going on today. I don't know if something is going on or she just had no idea what she was talking about
the 330 saw that rang up yesterday for $0.01 is not in the system. the 500t blower is in a system for $80.03 but rings up a penny today
 

Wrenchinfool

Well-known member
Joined
Dec 19, 2014
Messages
210
Location
Cleveland Ohio
customer service rep said something about some glitch going on today. I don't know if something is going on or she just had no idea what she was talking about
the 330 saw that rang up yesterday for $0.01 is not in the system. the 500t blower is in a system for $80.03 but rings up a penny today

500t rang up 80.03 for me today do they price adjustment for a penny?
 

vibblueser

Well-known member
Joined
Mar 16, 2012
Messages
405
I just returned from the local home depot. Found various items for a penny. Unfortunately the store showed 0 on hand quantity for all items. Are you guys actually finding quantities on hand locally? Find it hard to believe, you guys seem to hit home runs daily.
 

Mrbossman

Well-known member
Joined
Aug 31, 2015
Messages
150
I just returned from the local home depot. Found various items for a penny. Unfortunately the store showed 0 on hand quantity for all items. Are you guys actually finding quantities on hand locally? Find it hard to believe, you guys seem to hit home runs daily.


I usually check 2-3 store daily. My wife hates it. But I also usually find several deals each week.
3546c0016cff511850d71b0729d38fa1.jpg
26110ffa0673548f258f52f2276719ea.jpg


Yesterday and today's find. I usually only find one item not quantities. Two cent spent.




Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom