Home Depot Clearance Thread 2016

[jits1980]

Found these HDX plastic cabinets clearanced in the storage section for $12 (normally $79) Showing full price at all the other locations near by.

Whats the sku on this?

 

[drwheels]

If anyone just wants to hunt Schlage handles and can't use an in-store PC, here's all the models that I've been able to find for a penny. Keep in mind that some stores still carry some of these models, so if it has an actual spot on the shelf for a full set of matching, it won't be clearance at that store. But pull out each carton and look at the top to see the model numbers, grab any that don't match and go check the price at self checkout.

Model Number - Model Name and Handle Type
Schlage F10 V SIE 716 WKF - Siena Wakefield hall and closet
Schlage F40 BRW 619 - Broadway bed and bath
Schlage F40 LAT 619 - Latitude bed and bath
Schlage F40 MNH 626 - Manhattan bed and bath
Schlage F51 BRW 619 - Broadway keyed entry
Schlage F51 MNH 626 - Manhattan keyed entry
Schlage F60 V CAM 619 ACC - Camelot Accent front door entry
Schlage F60 V CEN 619 MER - Century Merano front door entry
Schlage FA10 MER 619 - Merano hall and closet
Schlage FA40 V MER 619 - Merano bed and bath
Schlage FB52N V PLY 605 - Plymouth keyed lock set (knob and deadbolt)

Each of the numbers in the model number tell you what type they are. This will help you know what should be on what shelf. I don't have SKU's for all of these because most of the boxes tell you what model name they are. If that model name doesn't match current offerings, it is likely a penny. Grab a yellow ladder and pull that sucker down, open it up and price check. Hasn't failed me yet.

Here's a reference guide for you -
F10 or FA10 = hall and closet
F40 or FA40 = bed and bath
F51 = keyed entry
F60 = front door entry
716 = aged bronze color
619 = satin nickel
626 = satin chrome
605 = bright brass

If anyone happens to find ANYTHING of the Siena Wakefield line, please let me know! I'm looking for 5 bed and bath knobs, a front door entry, 2 keyed entry, and one keyed entry and deadbolt. Happy hunting!

There is about twenty kinds at a penny. I bought the last two rolls of .63 duck tape.

 

[Cr-48]

Milwaukee M18 Fuel Brushless Hammer Drill/Impact Driver Combo with hard case $231.86 You are welcome.

If you can still find that kit in store it may be less. I saw one yesterday for $200. I think I'm going to go back and get it today, if it's still there. I've been looking at the gen 2 but the cheapest you can get it is $270 with the $150 off. Might settle for the gen 1 for now.

 

[Poop Man]

Whats the sku on this?

I'll check when I get home later on.

 

[Poop Man]

If anyone has a few 7" tile blades they'd be interested in trading for either 8" or 10" please PM me. I've got the bigger ones but I need the 7's for my saw. Thanks

 

[honda pc]

Also a great deal on the Ridgid 4amp battery with charger (they've dropped this $20 over the past two weeks. If you pair it with the Dewalt DCK296M2 you end up paying like $38 after tax. Just return the dewalt set up. Killer deal if you have any of the Ridgid 18v line.

not really... if you order the dewalt with the ridgid hammerdril/saw kit....and do dewalt return...you get the ridgid kit for $108+tax...which has one 4amp and 2amp battery, brushless hammerdrill, brushless saw....charger...

you have until 1/31... till promo ends.....and make it sweeter if you can add coupons on top... for some reason....that combo didn;t work instore but did work online....so I did a online order and store pickup but couldn't add any coupons....

good luck.

 

[ShakinLM7]

9 out of 10? Then I'd blame the installer. I've had 4 NEST for 3 years now, not a hiccup, and I'm a DIY.

Lol! I've been wiring t-stats since I was old enough to reach them using a step ladder.

I really can't speak for the nest stats myself, just going off what others from the industry say.
If someone I sell to wants a smart stat than I sell them a Honeywell. I don't like getting called back out and working for free so I try and stick with the most reliable stuff i can find.

 

[19Vert64]

Seen these today


Sent from my iPhone using Tapatalk

 

[Gore]

If anyone just wants to hunt Schlage handles and can't use an in-store PC, here's all the models that I've been able to find for a penny. Keep in mind that some stores still carry some of these models, so if it has an actual spot on the shelf for a full set of matching, it won't be clearance at that store. But pull out each carton and look at the top to see the model numbers, grab any that don't match and go check the price at self checkout.

Model Number - Model Name and Handle Type
Schlage F10 V SIE 716 WKF - Siena Wakefield hall and closet
Schlage F40 BRW 619 - Broadway bed and bath
Schlage F40 LAT 619 - Latitude bed and bath
Schlage F40 MNH 626 - Manhattan bed and bath
Schlage F51 BRW 619 - Broadway keyed entry
Schlage F51 MNH 626 - Manhattan keyed entry
Schlage F60 V CAM 619 ACC - Camelot Accent front door entry
Schlage F60 V CEN 619 MER - Century Merano front door entry
Schlage FA10 MER 619 - Merano hall and closet
Schlage FA40 V MER 619 - Merano bed and bath
Schlage FB52N V PLY 605 - Plymouth keyed lock set (knob and deadbolt)

Each of the numbers in the model number tell you what type they are. This will help you know what should be on what shelf. I don't have SKU's for all of these because most of the boxes tell you what model name they are. If that model name doesn't match current offerings, it is likely a penny. Grab a yellow ladder and pull that sucker down, open it up and price check. Hasn't failed me yet.

Here's a reference guide for you -
F10 or FA10 = hall and closet
F40 or FA40 = bed and bath
F51 = keyed entry
F60 = front door entry
716 = aged bronze color
619 = satin nickel
626 = satin chrome
605 = bright brass

If anyone happens to find ANYTHING of the Siena Wakefield line, please let me know! I'm looking for 5 bed and bath knobs, a front door entry, 2 keyed entry, and one keyed entry and deadbolt. Happy hunting!

Which finish are you looking for in the Siena line?

 

[G2G]

Northern burbs of Chicagoland here

Have you guys noticed that most of the stores in our area are doing inventory? A little bit harder to score deals but I've still found some

Oak Lawn area for me.

 

[f575gtc]

http://www.homedepot.com/p/Stinger-...=e244a14cbfad11e598b9d65dc129ded70000&cj=true

$12 small shop vac, great for cars.

 

[stonerado]

Which finish are you looking for in the Siena line?

Aged Bronze. Code 716 in the model name. Should look like F40 SIE 716 WKF, or F60 SIE 716 WKF and so on. Thanks for looking out for them for me!

 

[Poop Man]

not really... if you order the dewalt with the ridgid hammerdril/saw kit....and do dewalt return...you get the ridgid kit for $108+tax...which has one 4amp and 2amp battery, brushless hammerdrill, brushless saw....charger...

you have until 1/31... till promo ends.....and make it sweeter if you can add coupons on top... for some reason....that combo didn;t work instore but did work online....so I did a online order and store pickup but couldn't add any coupons....

good luck.

Already have those tools in another kit I own. Hence its a "good deal" if you just need a battery and a charger for your existing stuff and don't want the hassle of parting out **** on Craigslist.

 

[sledneck32!]

12" dewalt compound sliding double bevel miter saw for 399. Its sposed to be a special buy starting next month but i got it early.

Also got the dewalt stand for 199 which is pry full price.

I think i got took lol. No laser or worklight on the saw.

Sent from my LG-H811 using Tapatalk

 

[swoyer]

Anyone watching the garage floor epoxy?

Or the ryobi gas blower?




Sent from outer space using Taptalk.

 

[mswol767]

12" dewalt compound sliding double bevel miter saw for 399. Its sposed to be a special buy starting next month but i got it early.

Also got the dewalt stand for 199 which is pry full price.

I think i got took lol. No laser or worklight on the saw.

Sent from my LG-H811 using Tapatalk

Lol yea this isn't even a like warm lol

 

[Wasatch Quad]

I haven't been able to find any specs on the new dewalt dws779?

 

[stonerado]

Anyone watching the garage floor epoxy?.

I am. I'd like to pick up the gray at the $.03 level.

 

[mswol767]

I am. I'd like to pick up the gray at the $.03 level.

Likewise

 

[erty67]

763584

1400w work light as low as a penny!

Sent from my HTCONE using Tapatalk

 

[Tellingthem]

Just found this for a penny. Never even saw it marked clearance on the shelves.

 

[JazRedGT]

Anyone watching the garage floor epoxy?

Or the ryobi gas blower?




Sent from outer space using Taptalk.

I have 14 boxes of the 200sqft coverage in tan gloss. $40 a box plus shipping. I'm located in Norfolk, VA for anyone local. If you buy multiple boxes I'll cut a deal.

 

[ratchet_gear]

12" dewalt compound sliding double bevel miter saw for 399. Its sposed to be a special buy starting next month but i got it early.

Also got the dewalt stand for 199 which is pry full price.

I think i got took lol. No laser or worklight on the saw.

Sent from my LG-H811 using Tapatalk

Just a heads up. If you don't need the saw right away, you should ask Home Depot when they are running the next promotion for The Dewalt DWS780. With this promotion you get the stand that you bought for free and you get the better saw for the same price you paid.

 

[Cr-48]

Just had an employee tell me about penny items. I was standing by the clearance shelf holding the Gen 1 Fuel kit, an employee walked by and said "you beat me to it". I told him that the store showed 4 in inventory so there was a chance there might be more around. We talked for a few minutes and he mentioned that clearance items ending in 6 would drop in price more and "eventually down to a penny".

 

[jay8s]

I just picked this up for free. They would not take a penny for it when it rang up as that.


Sent from my iPhone using Tapatalk

 

[blgli]

I just picked this up for free. They would not take a penny for it when it rang up as that.


Sent from my iPhone using Tapatalk

Nice! I had to pay $30 bucks for the one I got yesterday but I've had them before and they are nice quiet fans. 1.0 sones. Yours seems a little bit noiser but for free I wouldn't complain one bit.

 

[sledneck32!]

Sent from my LG-H811 using Tapatalk

 

[jay8s]

Nice! I had to pay $30 bucks for the one I got yesterday but I've had them before and they are nice quiet fans. 1.0 sones. Yours seems a little bit noiser but for free I wouldn't complain one bit.

I have been watching this one on the clearance shelf for awhile now. They had 5 yesterday at 30.03. Today they went to 20, but it was really a penny on the box scan, not the 20.03 price tag. Ill be hitting another HD tonight to find a second for the other bathroom. I am still looking for the $4 ladder platform. Hope tonight is my lucky night.

 

[sledneck32!]

Been walking around home dump for an hour and still cant find the clearance rack.... Will keep looking

Sent from my LG-H811 using Tapatalk

 

[swoyer]

Just had an employee tell me about penny items. I was standing by the clearance shelf holding the Gen 1 Fuel kit, an employee walked by and said "you beat me to it". I told him that the store showed 4 in inventory so there was a chance there might be more around. We talked for a few minutes and he mentioned that clearance items ending in 6 would drop in price more and "eventually down to a penny".

At least he was cool about it. Do you have the sku handy?


Sent from outer space using Taptalk.

 

[Cr-48]

At least he was cool about it. Do you have the sku handy?

460351

Price was $200

 

[dodge610]

Been walking around home dump for an hour and still cant find the clearance rack.... Will keep looking

Sent from my LG-H811 using Tapatalk

Check the end cap by the tool section thats where the one is in my HD.

 

[sledneck32!]

So this should ring up a penny? Im sweating lol

Sent from my LG-H811 using Tapatalk

 

[pedrodagr8]

Thanks for posting the vacuum cleaner deal. Needed one for the car, my local HD had a BUNCH of them. Said $19.98 on the sign but rang up $12.

 

[nikon5400]

So this should ring up a penny? Im sweating lol

Sent from my LG-H811 using Tapatalk

$60.06 in the price check app

 

[06GMC5.3L]

So this should ring up a penny? Im sweating lol

Sent from my LG-H811 using Tapatalk

Not likely.


Sent from my iPhone using Tapatalk.

 

[FEVERinc]

I bought a couple of those epoxy kits. No more of the gray ones around here or I'd buy a few more

 

[sledneck32!]

Well i got 3 items off clearance rack that ended in .03 but no pennies. I did save 90+% but pretty much a waste. Gonna have to dig into this further.

Sent from my LG-H811 using Tapatalk

 

[txusa03]

Not penny but $7.53 (original $29.99). I found one. Good luck hunting if you need one. Husky drill driver pouch.

http://www.homedepot.com/p/Husky-2-...her-GP-46661AN14/205593637?keyword=1001075725

 

[JR4815D2]

Not sure if posted, but plenty available. Will wait for the next price drop

Sent from my SM-G900V using Tapatalk