Home Depot Clearance Thread 2016

[Diesel_Dave]

Showed them this. Zoomed in so they could not see clearance below the price. Not that it would've mattered to these ladies...

 

[erty67]

My store had a whole pallet of them marked down.

Also had most of the exact schlagle door handles in stock from my picture

, but rang up full price.


Sent from my iPhone using Tapatalk

I have soo many tools, but this is almost at a price level I'll buy more at. Good thing cause Kobalt deals have been lacking. Lmao

Sent from my HTCONE using Tapatalk

 

[Spn1025]

Would you install it in your home? I have been watching those in past when they're like 75 bucks. I think I know a store that had a few.

I was going to, but it's a little too big for the spot I was gonna put it. My only option is to find a smaller one, or find a big one to replace the big mirror above the vanity. I have 2 of these now. eBay they go

 

[Spn1025]

Sent from my iPhone using Tapatalk

 

[Spn1025]

Black Friday special




Sent from my iPhone using Tapatalk

 

[Foos]

Black Friday special




Sent from my iPhone using Tapatalk

I have 4 of those I bought on Black Friday using the 50% off Ace Coupon that gave 50% off for any reg price item under $30 or $15 off any reg price item over $30.
I like them and for under $9 I would buy 4 more

 

[Spn1025]

I have 4 of those I bought on Black Friday using the 50% off Ace Coupon that gave 50% off for any reg price item under $30 or $15 off any reg price item over $30.
I like them and for under $9 I would buy 4 more

Yea I've been looking for them. Couldn't even find them at $17. If I can find 6, I'd replace all of my basement lighting

 

[krouchchocolate]

Black Friday special




Sent from my iPhone using Tapatalk

Could not find them either. Wanted it so I can replace all my garage lights.

 

[BlueSander]

So this should ring up a penny? Im sweating lol

Sent from my LG-H811 using Tapatalk

I spotted 3 of these today but they all rang up the clearance tag price. When do you guys think these will be a penny each?

Also, many of you scored good deals on faucets and showerheads, could we do a swap or I pay to get some?

Thanks

 

[Foos]

Has anyone seen the Werner MT1 black Friday special 22' ladder any cheaper than $90?

 

[chrisexv6]

Could not find them either. Wanted it so I can replace all my garage lights.

Still on the website but at full price and not available in stores.

A little low cri rating but for $9 can't complain.

I'll look for some myself the next time I'm at the depot.

Sent from my Nexus 6P using Tapatalk

 

[12three]

anyone notice brinkmann grilling tools drop to, i believe 75% off, then just suddenly disappear en masse? boxes and everything... gone. kinda mad bc i wanted some of the cast iron stuff and its only available at higher priced stores

 

[ghettogarage]

Has anyone seen the Werner MT1 black Friday special 22' ladder any cheaper than $90?

Just posted this a few pages ago. $60.04 SKU#1001-326-583 sherwood, Oregon HD

I used a 10% off and discount gift card...brought it to $49

 

[12three]

a few deals that are probably coming down the line soon are ridgid x4 impact wrench, x4 circular saw, x4 reciprocating saw... they were at .00 levels today and not quite slickdeals.

the x5 brushless hammer drill/circular saw combo dropped to $139 recently too.

 

[Rogue1987]

Brinkmann is going out of business and being replaced with nexgrill, at least that is what I was told. Theres still a few charcoal drum style at my store for $69, if they drop again I'll grab one.

 

[ghettogarage]

Scored two nutone fans $9.23 and $20.03. 2x American standard marquette shower set $30.03 each. Less after coupon + gc. Good find today and only went to one HD.

Noticed someone snatched the bosch laser level thing. Anyone know if they went penny?

 

[12three]

Also had something weird happen last night and today.. For some reason BOTH of these rang up cheaper at than the PCA showed....?

Both rang up for around $5

i have run into this situation on other products < namely the ridgid x5 brushless hammerdrill/circular saw combo >... im almost wondering if they were in the process of adjusting the prices lower when i checked the price checker... ie. maybe they put tags out then needed to finalize something in the system that feeds/controls the price checker's database? i have also seen the reverse tho, higher priced old tags combined with a lower price at checkout which matched the price checker.

the price checker is an odd beast in that i can see stock for stores '1,2,3,4,and5' at 'store 1', but if i go to 'store 2' the stock for both 'store 2' and 'store 1' will show a diff number than it did on the price checker in 'store 1' ...

craziest part about it is that it likely wasnt a timing issue either, bc store 1 price checker said store 2 had one nailer in stock, but store 2 price checker said store 2 had 2 nailers in stock < which it did >. likewise, store 1 pricechcker said store 1 had a generator in stock <it didnt> but store 2 pricechecker said store 1 did not have a generator in stock. went back to store 1 next day and it still said it had the generator...

 

[Spn1025]

Sent from my iPhone using Tapatalk

 

[dh1]

Brinkmann is going out of business and being replaced with nexgrill, at least that is what I was told. Theres still a few charcoal drum style at my store for $69, if they drop again I'll grab one.

That's why I saw them on clearance.

 

[Foos]

a few deals that are probably coming down the line soon are ridgid x4 impact wrench, x4 circular saw, x4 reciprocating saw... they were at .00 levels today and not quite slickdeals.

the x5 brushless hammer drill/circular saw combo dropped to $139 recently too.

I just bought (Jan 1) the 1/2" Impact wrench using the New Years 25% off Harbor Freight coupon $139-25%=$104.25 I would love to get a price adjustment!

Now I am looking to upgrade my Genx4 1/4 Impact to the Gen5X 3 speed brushless Impact but you have to buy the $279 brushless combo to get it and with buying the $69 X5 non-brushless Impact for the $100 discount that still leaves it at $198. It does have two 4.0 AH batteries I can sell and the brushless drill but it still might cost me some out of pocket money and I would like to avoid that if possible.

Those jackasses at ridgid are now saying that I need to send them my receipts for the 1/2" Impact wrench and the Brushless drill/saw combo I bought, they didnt even email and tell me, I only found out because I checked to see if it had been approved yet.
Does this happen to everyone?

 

[Foos]

Brinkmann is going out of business and being replaced with nexgrill, at least that is what I was told. Theres still a few charcoal drum style at my store for $69, if they drop again I'll grab one.

I bought the square cast iron griddle $5.03, 10" round cast iron skillet $5.03 and two cast Iron smoker boxes $3.03 I think? I just haven't found the cast iron press at less than $7.06 yet

 

[Shop Squirrel]

Those jackasses at ridgid are now saying that I need to send them my receipts for the 1/2" Impact wrench and the Brushless drill/saw combo I bought, they didnt even email and tell me, I only found out because I checked to see if it had been approved yet.
Does this happen to everyone?

Happened to me too. No email and found out by checking the website. Called the support number and was told that I still had to send the stuff in. Was told a legible copy of the receipt was okay and following advice in another forum I've typed up a page with my info and that of the tool to go along with copies of the 'need more info' page on the website. We will see how it goes.

 

[bradp]

Grabbed a few items today.
Fast Orange 1000 034 682 $1.83
AccuRite 1001 080 542 $15.03
Gerber 1000 044 246 $7.53

 

[stonerado]

I sold both of mine today for 200$ each, now to go find the 3 I left in the store..

I sold my first three paslodes for $725 to one guy with a contracting company. Then sold another that I had in my possession for literally 40 min for $275. All via Craigslist. Neither one even offered less than I was asking.

 

[jad1]

the price checker is an odd beast in that i can see stock for stores '1,2,3,4,and5' at 'store 1', but if i go to 'store 2' the stock for both 'store 2' and 'store 1' will show a diff number than it did on the price checker in 'store 1' ...

craziest part about it is that it likely wasnt a timing issue either, bc store 1 price checker said store 2 had one nailer in stock, but store 2 price checker said store 2 had 2 nailers in stock < which it did >. likewise, store 1 pricechcker said store 1 had a generator in stock <it didnt> but store 2 pricechecker said store 1 did not have a generator in stock. went back to store 1 next day and it still said it had the generator...

Inventory counts are notoriously inaccurate and should not be taken as gospel. Also, the price check app will usually show 1 less qty for the remote stores than what those stores would show if you are looking at the inventory on the app in those actual stores.

 

[stonerado]

Inventory counts are notoriously inaccurate and should not be taken as gospel. Also, the price check app will usually show 1 less qty for the remote stores than what those stores would show if you are looking at the inventory on the app in those actual stores.

So true. I had my local store call a store that I would be at later in the day to see if they had any of the framing nailers left. They said nope, we're out. I get there and go straight to that aisle. I see none in the overhead directly above where the new model was...but several bays down, it was sitting in the very top amongst some other boxes. Checked inventory and it showed -1. Yeah, it was unopened. Never trust inventory counts.

 

[12three]

Inventory counts are notoriously inaccurate and should not be taken as gospel. Also, the price check app will usually show 1 less qty for the remote stores than what those stores would show if you are looking at the inventory on the app in those actual stores.

gotcha.. that actually does explain it, and now that you mention it i believe a semi-knowledgable hd employee told me that once a cpl yrs ago... i knew there was a reason i stopped chasing hd clearance...

 

[Winter]

Ryobi one + Bluetooth Radio Kit with P102 Battery and P119 trickle Charger Now $24.00
1001-386-099, Model P1841

Online showes $49 but when you pick up, receipt = $24.
Tag on shelf = $24, picked up a few more.

 

[sseiyah]

So true. I had my local store call a store that I would be at later in the day to see if they had any of the framing nailers left. They said nope, we're out. I get there and go straight to that aisle. I see none in the overhead directly above where the new model was...but several bays down, it was sitting in the very top amongst some other boxes. Checked inventory and it showed -1. Yeah, it was unopened. Never trust inventory counts.

Did you check 3903 yet? Supposed to have some, maybe 3 but probably a miscount, still might be worth trying. I dont have time to drive over there.

 

[swoyer]

There's a ton of trim paslodes on CL in bucks county for like $160, not on sale yet around here yet. What gives? Am i missing something.


Sent from outer space using Taptalk.

 

[stonerado]

Did you check 3903 yet? Supposed to have some, maybe 3 but probably a miscount, still might be worth trying. I dont have time to drive over there.

Oh yeah. I bought the new ones that I could find there a couple of weeks ago. Now, inventory shows 2, but I could only find one. That one was a heavily used opened return. Even had the guy's name sharpied all over it. I asked for an additional discount since it was in such rough shape, manager said no, they're on a scheduled discount and no more can be taken off. I told him I'd find a new one for the same price. He laughed and said, not one of these you won't. Well...I bought one just a few hours later.

 

[davidw221]

I needed Coe-base for my new garage, scanned the clearance rack yesterday at Lowes, found 120' brown Coe-base for $95 was special order at $180, that was for 120ft. offered $45, they took it, so today, my garage is getting the new lower trim I was going to do in the first place at a greatly reduced price! I learned to check out the clearance rack from here, thanks all!

 

[bfm336]

200 piece Husky set in top box, not bad for a junker set or extra:
http://www.homedepot.com/p/Husky-Mechanics-Tool-Set-in-Metal-Box-200-Piece-H200MTSMB/205897981

 

[Thedevilsequal]

With the impending weather and my schedule I'm not gonna get out to go look for these. If your local to eastern PA here you go.
View media item 57239
I think this is an old tv mount that still hasn't pennied out.
View media item 57240
Found myself a display trimmer last night, wouldn't let me buy at a penny (they are now pennies in the system). Real douche canoe of a guy as well. I will be making a point of it to buy any penny item I can find in his store. I didn't really want/need it but the extra battery would have been nice. I even brought it up to customer service and asked because it didn't have a scan tag. Think he was pissed off as he appeared to be disassembling another snowblower to fit in the back of a civic.
View media item 57241

 

[06GMC5.3L]

Nothing from spn yet today... Must be slim pickings.

 

[JamieK]

My local store still was showing 0 of the framing nailers in stock, but I stumbled upon one in the back of the clearance shelf. It wasn't in a cardboard sleeve, and there was only a 25% off original price sticker on it. It was heavily used and missing the battery. Just for grins, I took it to the contractors desk to see if I could get it for 25% (or less) off the current $100.03 price. Lady working the desk was rude, and refused to even honor the $100.03 price. Since it was used and missing the battery, I just said nevermind.

But I did find one of the bathroom ceiling fans. The in-store price check showed 0 in stock, but found one up in the rafters. My current fan is slowly dying, so it was a good find.

 

[Jeepster425]

Sent from my iPhone using Tapatalk

There was 3 of them on the computer, asked a lady to help me find them, but said no home on her computer device, oh well.

Picked up 2 more paslodes today though

 

[Cr-48]

Does anyone have the Lithonia Lighting shop lights (sku: 775479)? Worth $7.x3?

 

[txusa03]

Nothing from spn yet today... Must be slim pickings.

or the other way around...he is too busy loading and unloading.

 

[Bnagy]

Keep an eye on these for price changes. I scored 3 framing nailers and one Fairhaven fan today.


Sent from my iPhone using Tapatalk