Home Depot Clearance Thread 2016
- Thread starter ratchet_gear
- Start date
- Status
Hotroddetailer
Active member
- Joined
- Jan 8, 2013
- Messages
- 30
Why is it when I look the number on that Husky box does not come with $189?
one9gt
Well-known member
That screenshot is from an in store computer using to employee price check app
Sent from my iPhone using Tapatalk
Last edited:
Hotroddetailer
Active member
- Joined
- Jan 8, 2013
- Messages
- 30
Oh ok thank you
Reach for the stars
^^Goals for the week
Sent from my iPhone using Tapatalk
Sent from my SM-N900P using Tapatalk
javier.h224
Member
- Joined
- Jan 31, 2016
- Messages
- 5
1500 assorted cable ties 3.24 
Enviado desde mi Che2-L23 mediante Tapatalk
Enviado desde mi Che2-L23 mediante Tapatalk
mswol767
Well-known member
Picked this up for 78
Thedevilsequal
Well-known member
- Joined
- Aug 21, 2015
- Messages
- 208
Husky 1-1/2 ton jacks down $5
View media item 57653
Now interestingly, I was confronted tonight at my local store. Told I'm not supposed to be on store computers and they will not let me penny shop. I was actually clearance shopping. They also informed me there will be a new inventory system and pricing structure in the next few weeks being rolled out. This kind of explains the pricing I'm seeing this week.
These went from ~30 to 15 instead of 10 like everywhere else.
View media item 57654
This socket set from ~10 to 5
View media item 57655
Lastly, as a screw you to the assistant store manager I went and pulled a penny item and walked over the CS counter where she was with a few other associates and informed her if I wanted to penny shop I could and she couldn't stop me. It was only two watts copper hot water heater lines but it drove the point home. It only makes me want to shop more as HD and Lowes drove out all local lumber yards and hardware stores.
View media item 57653
Now interestingly, I was confronted tonight at my local store. Told I'm not supposed to be on store computers and they will not let me penny shop. I was actually clearance shopping. They also informed me there will be a new inventory system and pricing structure in the next few weeks being rolled out. This kind of explains the pricing I'm seeing this week.
These went from ~30 to 15 instead of 10 like everywhere else.
View media item 57654
This socket set from ~10 to 5
View media item 57655
Lastly, as a screw you to the assistant store manager I went and pulled a penny item and walked over the CS counter where she was with a few other associates and informed her if I wanted to penny shop I could and she couldn't stop me. It was only two watts copper hot water heater lines but it drove the point home. It only makes me want to shop more as HD and Lowes drove out all local lumber yards and hardware stores.
cagullett1
Well-known member
Found a couple Bosch GLL 2 laser levels for $20.03.
swoyer
Well-known member
That last part about the local shops. That's kinda how I feel. Good for you man. I can't buy a straight door to save my life and the manager tells me well that's what we sell so buy it or leave it. So now I make it a priority to hit that store as often as possible and it's been quite prosperous. [emoji12]
Sent from outer space using Taptalk.
nySD
Banned
Don't always believe the price tag. These Gerbers were tagged $28.06 on the peg up along with the other multi tools...3 pennies. UPC 013658142640
The Sharkbite was mixed in with others. Easy to spot as the ends thread onto the body. 1 penny UPC 697285244320
thecody59
Well-known member
That line about you can't use the computers is complete bs! My ones at my home depot are set up to let customers use the computers.
That **** pisses me off big time when it happens.
Asked a lady at the Pro Desk yesterday if I can lookup a price on the computer real quick and she had a confused look on her face and said no, customers can't use the computers. She said perhaps the customer service counter would "let me". Went back to Appliances and the CSR back there said have at it and lookup whatever you need to.thecody59
Well-known member
They are either doing it because they know what we are up to and know we are looking up penny and clearance deals or they are just being a-holes!
openwheelracing
Banned
- Joined
- Apr 9, 2015
- Messages
- 71
Of course they know.
Sent from my Nexus 7 using Tapatalk
Sent from my Nexus 7 using Tapatalk
BrockSoCal
Member
- Joined
- Feb 1, 2016
- Messages
- 7
Hey. Registered here after being linked from a truck forum I frequent. Think you guys got me hooked. Went to my local home depot to look for some deals. Only think I came away with was this: 
. Got it for $19 which isn't bad there was another Bosch laser leven marked N/H which I assume means no home but it was only marked down a few bucks. Also thought I scored a garage door opener but .01 but apparently is was the wrong one 
Sent from my Nexus 6P using Tapatalk
. Got it for $19 which isn't bad there was another Bosch laser leven marked N/H which I assume means no home but it was only marked down a few bucks. Also thought I scored a garage door opener but .01 but apparently is was the wrong one Sent from my Nexus 6P using Tapatalk
swoyer
Well-known member
I think your probably looking for the one that says bonus. HD520EVG. Got 2 at the 42.02 price, but whatever. No pennies here yet.
BrockSoCal
Member
- Joined
- Feb 1, 2016
- Messages
- 7
This one was 1.25hp still rang at full. Going to check the 2 other local stores tomorrow. Also couldn't find any of the Milwaukee drills posted here went late though.
Sent from my Nexus 6P using Tapatalk
went late though. Sent from my Nexus 6P using Tapatalk
Don't always believe the price tag. These Gerbers were tagged $28.06 on the peg up along with the other multi tools...3 pennies. UPC 013658142640
The Sharkbite was mixed in with others. Easy to spot as the ends thread onto the body. 1 penny UPC 697285244320
got a gerber like that, but maybe smaller from menards.. it was barely even worth a penny! the 'knife' was just a dull sliver of metal
I forget which store this was at. Somewhere in Mass. When I punched in the SKU, it came up not found, so it could have either been a penny or not in their inventory. I didn't bother pulling it off the shelf since it wouldn't fit in my car anyway.
Sent from my iPhone using Tapatalk
scored a similar one today for 75% off... just an fyi to others that they might be out there in some areas. the store in question had corp inventory ppl running around pulling old stuff <especially large items> into the main aisle up front and then slapped big discounts on them in the 50-90% range.
and fwiw, i think thats some kind of specialized clearance sku, not the original sku. my product is diff, but it has that same sticker and sku on it.
zeekh
Well-known member
In my AO that is the only way you will get clearance items. They're always listed in the computer but on the shelf
This new pricing is interesting. The Bosch should have gone to a penny, not $19.
Maybe HD is starting to have more clearance prices in an attempt to get rid of the stuff before it reaches penny status?
i.e. 38.03 to 19.00 then to penny, or maybe to another .03 price then to penny, who knows...
This could make things a little trickier.
Maybe HD is starting to have more clearance prices in an attempt to get rid of the stuff before it reaches penny status?
i.e. 38.03 to 19.00 then to penny, or maybe to another .03 price then to penny, who knows...
This could make things a little trickier.
Could be.
What made me wonder is the Ryobi radio/charger deal from BF. I forget the exact price but it definitely wasnt 04/02 or 06/03
I noticed the same thing over the weekend. An HD employee was pushing a cart with the huge husky duffle bags and she mentioned to someone that they were all penny items. I just looked at the tag and it went from 69.99 to 66.00.
elronin
Well-known member
That's what I think happened to all the Watts valves 98 to 68 down to 28.03 then down to 7.00 then to a penny. I'm fine with 7.00 that's a great price.
krouchchocolate
Well-known member
- Joined
- Sep 25, 2011
- Messages
- 265
Ryobi radio/charger was 18.89. Weird price
wizness
Well-known member
While pennies are nice, I rather have most things drop like they have been doing wheres it's less than 10% if the cost of new. You can still make a good profit and don't have to worry about any BS at checkout. I still love me some penny deals tho.
Could it be that they are on to us?
That would stink, although Id get back some free time instead of spending it wandering the aisles of HD!
True.
I find myself buying things that I want to keep at the .03/.02 levels.
Honestly havent made much profit on any of the things Ive bought on clearance....CL seems picky/dead around my area.
I have had success selling the DeWalt sawzalls and DeWalt ToughBoxes, but everything else gets the occasional "do you still have it" and then no response.
krouchchocolate
Well-known member
- Joined
- Sep 25, 2011
- Messages
- 265
Yeah I have been spending way too much time at Home Depot the last few days. But I am hooked. I don't really get any penny deals but just looking for clearance items that I need
Blasphemy!!!!!!
Last edited:
- Status