Home Depot Clearance Thread 2016

[chrisexv6]

That reminds me I did buy an Ego trimmer, it was at the 03 level (53.03)

I really should put that up on CL.

 

[rednotch]

Man some stores are good a hiding stuff, PCA showed 14 on hand of the 14pc husky screwdriver sets and 2 of the 205pc husky tool sets. could not find either and now my neck is killing from trying to read all the damn upc codes in top stock.


also I think the floormate steam mop went penny here, dropped off the PCA in this store, there pretty much gone around here though.

 

[rednotch]

Sure they do. Its a 8 month old Unicorn... PB-500

never dropped in my local store, still plenty of PB500T blowers and timber wolf chainsaws.

 

[stonerado]

EGO trimmers around here are still at .06 level. Have been there forever...

Same here. I'm watching I think 8 of them between 3 stores. I need two of them for personal use, and would gladly flip the others at the 03 level. But they're all still 136.06.

 

[loranger]

Bought that mower when it was on "clearance" last fall. I don't think the Honda stuff ever makes it to the schedule clearance. But I may be wrong.

Either way that's the best mower you could buy right now. It's a shame they don't make lawn boys that well anymore. Honda is the only one that really is good in my opinion. I guess the huskys are okay. The plastic deck is a nice feature, lifetime guarantee.


Sent from outer space using Taptalk.

About 2 years ago there was a Honda HRX mower that made it down to $120 or so. That was before I had heard of the price check app and was unable to find one by running around to different stores. Just got this one unboxed and it is a sweet mower! I already mowed this week but am actually looking forward to using it next week!

Stopped at another store for those boxes. Said they had 2. Can't find them. A store about an hr from me has 31 so says the computer. They said they are dropping to a penny and if they do they can't sell them to me. Yea ok

Where are you looking? I stopped by a store earlier to pick up some concrete and the Milwaukee box didn't even show up in the price check app. I never saw them at this particular store so I wonder if they only show up in stores that carried them? I may do some running around later and try to find one.

 

[BaMaDuDe87]

Johnson 48" Alum Top-reading level - $4.03

 

[jbuco]

Sent from my VS980 4G using Tapatalk

 

[glitchtracer]

Rob,
Thanks for the link.

 

[DumpyTHRASHER]

EGO trimmers around here are still at .06 level. Have been there forever...

1001214213 is the sku for the two ego trimmers I found at .01. One was in a garden center the other was the store display. Just make sure to check the sku tag on the display. Neither had a box just battery and tool.

Sent from my SM-G900V using Tapatalk

 

[Spn1025]

Oops. Penny.



Sent from my iPhone using Tapatalk

 

[Spn1025]

Dewalt clamp set/glue gun and clamp set/tape measure are $6.x2. Black Friday specials.
Also this



Sent from my iPhone using Tapatalk

 

[one9gt]

I wish those backpacks were that price in my area... By the time they hit that price they'll most likely pull it off the shelf


Sent from my iPhone using Tapatalk

 

[JesseJDE]

Do you guys find prices change in PCA on a certain day off the week? Or does it vary?

 

[wizness]

Hope they drop soon.

 

[jakedi99]

I think we're all chomping at the bit for those to drop.


Sent from my iPhone using Tapatalk

 

[chrisexv6]

FYI for those buying the Husky compressor - the source of the noise from my first one is the capacitor that is under the silver cover at the bottom of the unit.

There is nothing holding the actual cap in place, I think its rattling on the frame of the unit. Going to try and get a piece of foam rubber gasket underneath it and see if that fixes it.

Ive also noticed they changed the way the manifold is manufactured from my older (1/15) to the newer (6/15, the one that rattles) unit. Its now completely one piece, whereas the older unit had a press fit portion to hold the quick connectors on. Not sure either is a better setup, just something I noticed.

 

[kneeman]

^ Now you tell me. I'll go unbox one and see if that fixes it. If they only had one I guess I would have tried to narrow it down and find the noise but if they charged 199.00 for it as common as the noise is they should have noticed it in the design and fixed it.

I didn't pay attention to build dates but they were all built crappy, all the black frames were chipped scratched and rusting already.

 

[emachado]

Of course din't find nothing


Sent from my iPhone using Tapatalk

 

[chrisexv6]

^ Now you tell me. I'll go unbox one and see if that fixes it. If they only had one I guess I would have tried to narrow it down and find the noise but if they charged 199.00 for it as common as the noise is they should have noticed it in the design and fixed it.

I didn't pay attention to build dates but they were all built crappy, all the black frames were chipped scratched and rusting already.

Heh I did mention that mine sounded like a rattling metal piece.... Wasn't sure you were hearing the same sound.

The rest of both my units seem fine, aside from the loose outlet hose that I fixed myself. Id be interested to compare it to an actual CAT compressor

Sent from my Nexus 6P using Tapatalk

 

[emachado]

I'm keeping a eye on this, got one for $76 a fee weeks ago, now it's 70.00, 5 boxes are hidden at my closest HB, there are a few on other store I visit, ig I get them for a good price, local pawnshop or classifieds


Sent from my iPhone using Tapatalk

 

[jakedi99]

Couple stores around me with 10-14 of the 2 pack of Milwaukee fastback utility knives but of course they're nowhere to be found. Searched dang near everywhere.


Sent from my iPhone using Tapatalk

 

[DumpyTHRASHER]

They don't appear to be selling for that much on ebay but if you were interested.

Sent from my SM-G900V using Tapatalk

 

[Diesel_Dave]

couldn't find 1.

Sent from my SM-G925V using Tapatalk

 

[jakedi99]

I found a pallet full of the dewalt saws dws709 in the over head that were Saran wrapped up. Does this mean they might be going back to the vendor or do ya'll think they have just never been brought down?


Sent from my iPhone using Tapatalk

 

[wastedcosmonaut]

Could be both lol

 

[DumpyTHRASHER]

couldn't find 1.

Sent from my SM-G925V using Tapatalk

Probably a full display in the overhead lol

Sent from my SM-G900V using Tapatalk

 

[Diesel_Dave]

Probably a full display in the overhead lol

Sent from my SM-G900V using Tapatalk

I know I tried looking for a half hour then gave up. Disappointed. Not that I even need or want them. Just the satisfaction haha

Sent from my SM-G925V using Tapatalk

 

[Blue 04 Z71]

About 2 years ago there was a Honda HRX mower that made it down to $120 or so. That was before I had heard of the price check app and was unable to find one by running around to different stores. Just got this one unboxed and it is a sweet mower! I already mowed this week but am actually looking forward to using it next week!



Where are you looking? I stopped by a store earlier to pick up some concrete and the Milwaukee box didn't even show up in the price check app. I never saw them at this particular store so I wonder if they only show up in stores that carried them? I may do some running around later and try to find one.

All over the store. They called me back and the other store does have All 31 of them!

 

[01Snake]

Oops. Penny.

Had 5 and sold them really fast!

 

[getbent4x4]

Few weeks ago saw 60 gallon compressor single stage was on sale, hmm wonder how low they will go.

 

[wizness]

Still waiting on the dws 709 to drop again. Hopefully within the next couple weeks.

 

[jakedi99]

Still waiting on the dws 709 to drop again. Hopefully within the next couple weeks.

This is what Im waiting on as well. I figured they would have dropped again by now.


Sent from my iPhone using Tapatalk

 

[masters]

Scored my first Pennie item this morning. Also got a HDX 51-piece driving set for $1.32

Sent from Cuba using Tapatalk

 

[jumpstart]

Found a Ryobi cordless blower, but scanned as item not available, or something like that on the price checker. What would happen at the SCO with that? Has a clearance tag at 89.99 dated December 2014!

 

[chrisexv6]

Found a Ryobi cordless blower, but scanned as item not available, or something like that on the price checker. What would happen at the SCO with that? Has a clearance tag at 89.99 dated December 2014!

Store dependent.

Only time I had that happen to me the manager gave it to me for free.

Sent from my Nexus 6P using Tapatalk

 

[BaMaDuDe87]

The Ryobi P236 impact driver should be going clearance soon I would think. The P237 just came out and the 236s got moved to the clearance endcap but at full price.

 

[kneeman]

I never get that. I get I can't sell it give it to me. Bye.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[jumpstart]

Nope. After dealing with the third manager they offered it at $50. No thanks. About 49.99 too high for me.

 

[eddiemeddiem]

I picked up the 3 piece set of Mayhew Dominator pry bars for $37 today... Regularly $50.

It's a nice set, I'm happy.


Sent from my iPhone using Tapatalk

 

[12three]

I wish those backpacks were that price in my area... By the time they hit that price they'll most likely pull it off the shelf


Sent from my iPhone using Tapatalk

$25 is still not an awesome deal for that backpack, IMO. the quality seems a bit medicore and $25 is more of a 'good deal if you need it now' price