Home Depot Clearance Thread 2016

[brickie]

For the $100 brushed 3 piece dewalt, I have it up for $200 and literally getting offers from $150-180 nonstop. Sold both of mine for $180 less than 6 hours after getting it.

I'm going to go for $250, and let them talk me down..Can't put it up til tomorrow though cause as you say phone explodes on this kind of stuff. Even though I marked the Dewalt sold that I did sell, they started making offers thru other items!! It was crazy. I got more for Husky today though than I did for Dewalt..It was a display though.

thanks for bringing up the Home Depot Rebates. There's a new one!

https://www.homedepotrebates.com/11percentmatch/

Cool!!!! Had not seen that one!! Now time to find some stuff to buy!

 

[REXAMUS]

Found a store with one of the pressure washers showing 1 on hand...found one out in the garden section that looked like it was being used by the store. Couldn't see a model number but it looked a little different I think.

I did manage to score one of those Ego trimmers though.

 

[krouchchocolate]

Lol I found a store that supposedly had 17 52 inch husky tool boxes. Went to the store and found 0. Just wanted to buy 1 for myself to use! Dang!

 

[masters]

Cool!!!! Had not seen that one!! Now time to find some stuff to buy!

Exactly what I was thinking

 

[Spn1025]

Lol I found a store that supposedly had 17 52 inch husky tool boxes. Went to the store and found 0. Just wanted to buy 1 for myself to use! Dang!

probably an inventory error, but did you check the rafters outside in garden and peek into receiving?

 

[brickie]

probably an inventory error, but did you check the rafters outside in garden and peek into receiving?

The store where I got the Dewalt from was actually suppose to have 6 of them,although I only found 1. Walked the asiles checking the overhead but no others to be found..Glad i got the 1.

 

[masters]

The inventory has not been right ONCE in any of my stores on the tool boxes or chests.

 

[Stoutone]

The inventory has not been right ONCE in any of my stores on the tool boxes or chests.

It's probably because they send the wrong thing to the store. I thought I was getting 2 $110.03 compressors last week both on the same skid, wrapped, with a paper indicating 2 of them were on there. Turned out one was the new model. :/

 

[warmpancakes]

scored 3 of the dewalt 4 piece 20v kits, at the store where the employee hides stuff for himself to buy, best part manager knows me and was walikng with me when i saw them, he made the ebay flipper guy get them down.

also the husky LED flash lights are at .03 status only the ones with batteries

 

[ghettogarage]

Found a Brinkmann BBQ (copper color) in the way back of garden. Looked up the price... Still $199. Lame, they never cycled out of inventory.

 

[ghettogarage]

Home Decorator Blinds are hitting penny status in a few stores (others full price). I grabbed the ones that fell deep behind the racks for a penny.

 

[01Snake]

Another wild goose chase looking for the 2 Dewalt 3-Tool combo they showed as having in stock.

I told the old HD guy that they probably got stolen. Said they may have. Says people walk in and walk out with table saws, miter saws, etc and that they cannot do anything about it per company policy. Cannot pursue or even confront and can only call the cops but by the time they get there, it's pointless.

 

[Spn1025]

Anyone know when the Klein punch set hit .03? Has it been 1 week or 2?

 

[jakedi99]

Anyone know when the Klein punch set hit .03? Has it been 1 week or 2?

Edit: Nevermind, I think week 2 because I picked some up last weekend, which I would call week 1. Then this past week would be week 2.

 

[01Snake]

Edit: Nevermind, I think week 2 because I picked some up last weekend, which I would call week 1. Then this past week would be week 2.

Are they sitting on the shelf or are they boxed up? Found a store with a few in the PCA but, as usual, they were nowhere to be found. Wondering how they are shipped (2-3 in a box??)

 

[crzipilot]

Another wild goose chase looking for the 2 Dewalt 3-Tool combo they showed as having in stock.

I told the old HD guy that they probably got stolen. Said they may have. Says people walk in and walk out with table saws, miter saws, etc and that they cannot do anything about it per company policy. Cannot pursue or even confront and can only call the cops but by the time they get there, it's pointless.

Almost all big box stores that's company policy. Employees can not stop or detain those walking out with product. Best buy is the same way

 

[mswol767]

Anyone here ever request access to home depot API?

 

[ktb153]

found bosch 12" glide miter saw for $325 today, bought one and there is one left poinciana, fl.

 

[crzipilot]

Anyone here ever request access to home depot API?

This site used to have access but whatever portal they were using got shut down

http://sd.site88.net/homedepot.html

 

[Tim_P]

Got lucky and found 1 52 toolbox on Friday. It was on the floor already assembled. Just wheeled that puppy threw checkout.

Also found the display model ego weedeater for $45

 

[jakedi99]

Are they sitting on the shelf or are they boxed up? Found a store with a few in the PCA but, as usual, they were nowhere to be found. Wondering how they are shipped (2-3 in a box??)

Both. One store has them in the box. Sku sticker on side. Ends in 507. Bought some at .03 and had to pull them out of the box. Think there were 2 of them.

 

[Spn1025]

Anyone still have any Rigid 10" tile saw blades? I can trade some 7" or 8" (4 for 2), or something else

Was planning on keeping the 7" ones and buying a small Rigid tile saw, but I ended up picking up a nice 10" tile saw and already sold all of my 10" blades

Edit: all set now

 

[Diesel_Dave]

Anyone still have any Rigid 10" tile saw blades? I can trade some 7" or 8" (4 for 2), or something else

Was planning on keeping the 7" ones and buying a small Rigid tile saw, but I ended up picking up a nice 10" tile saw and already sold all of my 10" blades

PM Sent

 

[brickie]

These stories of people stealing are actually amazing to me a little.. I know people steal of course,but some of the reports of the brazenness is crazy!!!

 

[crzipilot]

They know the game and know that the associates can not stop them. Touch them. Or detain them by company policy. Policy is that a 500 retail / probably 250-200 cost item. Is not worth the cost of one of their employees tackling said theif. And injuring themself or others in the area. Especially. If suspect might be armed or a knife or whatever. The big stores will just write it off. Cheaper on the insurance and oji/disability claims I'm sure

 

[ishiboo]

found bosch 12" glide miter saw for $325 today, bought one and there is one left poinciana, fl.

Oh man, I would die for that deal.

 

[honda pc]

Don't know about walking out stealing freely.. I saw a loss prevention guy and manager chasing down a thief with cart full of tools in the parking lot.
And another 2 lady csr going after young gangster type when he was walking away with stuff, outside too.
Another lp guy following and arresting another guy outside the store.

Sent from my SM-N920V using Tapatalk

 

[warmpancakes]

Don't know about walking out stealing freely.. I saw a loss prevention guy and manager chasing down a thief with cart full of tools in the parking lot.
And another 2 lady csr going after young gangster type when he was walking away with stuff, outside too.
Another lp guy following and arresting another guy outside the store.

Sent from my SM-N920V using Tapatalk

Hd coporate would fire them all on the spot,

If you think customers stealing is a problem you should see what employees steal its 100 times worse

 

[chrisexv6]

Anyone here ever request access to home depot API?

I did. Never got a response.

 

[jits1980]

Anyone got the husky framing nailer combo they want to trade for or sell? Need to build a shed have a bunch of 21 degree nails to use..lol

 

[AG Camaro]

found bosch 12" glide miter saw for $325 today, bought one and there is one left poinciana, fl.

That qualifies for a you ****! That is my dream saw, but sadly couldn't justify spending north of $700 for it. I will be keeping my eyes open now.

Well bought.

 

[mmpiano119]

I did. Never got a response.

I had access to the HD API key for a little while. It wasn't any help. The item status was inconsistent with clearance stuff (sometimes said Clearance and sometimes said N/A) and it never showed the instore inventory for any clearance items. Also, it didn't provide access to pricing on clearance items. I would go to stores in the area. Pick some .03 and .06 items and then run the sku through the API to see what it turned up. It was so all over the board that it was essentially a waste of effort. It was a huge bummer because I intended to do something awesome with it for the GJ community. It's the thought that counts, right?

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[crzipilot]

I had access to the HD API key for a little while. It wasn't any help. The item status was inconsistent with clearance stuff (sometimes said Clearance and sometimes said N/A) and it never showed the instore inventory for any clearance items. Also, it didn't provide access to pricing on clearance items. I would go to stores in the area. Pick some .03 and .06 items and then run the sku through the API to see what it turned up. It was so all over the board that it was essentially a waste of effort. It was a huge bummer because I intended to do something awesome with it for the GJ community. It's the thought that counts, right?

Sent from my SAMSUNG-SM-N920A using Tapatalk

The site88. Used
To be good. If it's the one I remember

It's how I found all the clearance tool boxes through nc/tn/fl/az. Back in 12/13

Anyways it was pretty spot on showing stores with inventory of a specific sku


I have a feeling after their data breach. They simy closed everything

 

[ktb153]

lol i tried resisting since i already have a dewalt 780, i even made it out to the parking lot with just the stuff i went in to buy but then i checked if home depot had the menards rebate match and they did so i was sold. it looks like they might be clearing out some bosch stuff because a couple weeks ago the smaller table saw was on clearance and now those are gone including the display. today these two glide saws were at the end of an aisle with the table saws and there was no display model so i don't think they're carrying those saws in store anymore. i go to home depot a couple times a week usually and never noticed this saw being discounted so they must really be trying to get rid of them making the first markdown 50% off

 

[DumpyTHRASHER]

A year ago today lol, I think this qualifies as unmolested.

Sent from my SM-G930V using Tapatalk

 

[GoBlue924]

Anyone know why they arent displaying the ego trimmers? Went in today and they had 5 up top, none on display but they still rang up $199.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[Spn1025]

Anyone know why they arent displaying the ego trimmers? Went in today and they had 5 up top, none on display but they still rang up $199.

Sent from my SAMSUNG-SM-N900A using Tapatalk

THey should be displaying the 15"...those are the newer model

 

[warmpancakes]

199 is probably the 15 inch, the clearancw one is in a 6 foot long box

 

[elronin]

Baldwin door lock sets are on clearance .06 level

 

[elronin]

Only can post one pic at a time on iPhone here saw this Bosch table saw on clearance too