Home Depot Clearance Thread 2016

[jakedi99]

Was wondering around looking for a pressure washer that I really need for myself and stumbled on these in the rafters.



I found a computer for customer use in front of the store, looked up the item number and "nothing found"



How do I finagle getting a forklift guy to get them down? $10.00 tip so they go away after they get them down?



I would have tried but had no rood to haul them....although I did think about renting their truck.



Or is *** work the hassle.



Any one around Chicago know where to score a pressure washer?

Your pic didn't post

 

[nickelmore]

Thanks, fixed

3 Ryobi Gens,

 

[Jarreds]

I'm seeing the top number as an instock locally Ryobi grnerators at $599.
I'm seeing the bottom number as online only (possibly clearance or special order) listed at $699.

Sent from my SM-G920V using Tapatalk

 

[ekjohns]

I see a bunch of those ryobis open box like that at almost every HD all pretty much full price or "one time" 25% off since they are open

 

[aelb771]

Those 16 inch chain saw bars/chains dropped to a penny. I picked one up today.


Sent from my iPhone using Tapatalk

 

[Jarreds]

Nice.
They are still $79 for the 14" and $99 for the 16" by me, I checked today.
I bought at 16' a few weeks ago for $99 because I needed one. Last week I got 2 for $35.03, one still sealed in case and one display without case. Wish they would drop so I could price match that receipt. I forgot to ask when I found the 2 for 35.03.

Sent from my SM-G920V using Tapatalk

 

[Jarreds]

Found these in Arkansas 2 weeks ago.

Grabbed a few

Also saw these

Sent from my SM-G920V using Tapatalk

 

[aelb771]

Nice.
They are still $79 for the 14" and $99 for the 16" by me, I checked today.
I bought at 16' a few weeks ago for $99 because I needed one. Last week I got 2 for $35.03, one still sealed in case and one display without case. Wish they would drop so I could price match that receipt. I forgot to ask when I found the 2 for 35.03.

Sent from my SM-G920V using Tapatalk

Sorry should have clarified. This wasn't a full chainsaw...its just a bar/chain.

Do you guys think it would be safe to mount that on a 14 inch echo? I got a display model 330T last fall (for free) that was missing the chain. Not sure if it would be a good idea to put a 16 inch on it since it was designed for a 14 inch.

 

[nickelmore]

Was wondering around looking for a pressure washer that I really need for myself and stumbled on these in the rafters.

I found a computer for customer use in front of the store, looked up the item number and "nothing found"

[/IMG]

How do I finagle getting a forklift guy to get them down? $10.00 tip so they go away after they get them down?

I would have tried but had no room in my truck to haul them....although I did think about renting their truck.

Or is it worth the hassle.?
Any one around Chicago know where to score a pressure washer?

These are 2 1800 Watt Generators and one larger one sitting behind them. looks like there is a January 2016 date on them.

 

[brickie]

Actually around here those run full price. Was just looking at them while waiting for them to bring down my Dewalts.

Those dehumidifiers would have been sweet. Saw them once but they were not close to that price.

 

[REXAMUS]

I guess these will be dropping at some point

Sent from my SM-G920V using Tapatalk

 

[Jarreds]

Sorry should have clarified. This wasn't a full chainsaw...its just a bar/chain.

Do you guys think it would be safe to mount that on a 14 inch echo? I got a display model 330T last fall (for free) that was missing the chain. Not sure if it would be a good idea to put a 16 inch on it since it was designed for a 14 inch.

Rule of thumb is 1 size up is fine, expecially on the smaller blades.

Sent from my SM-G920V using Tapatalk

 

[dacan23]

I had been watching the Milwaukee pliers and wrenches that have new models coming out, but they all sold out before a 2nd price drop. Milwaukee stuff usually goes quick at any discount.

I guess these will be dropping at some point

Sent from my SM-G920V using Tapatalk

 

[tab2]

65W Equivalent Soft White 5&6in.E26 Dimmable Downlight LED Light Bulb (3-Pack)

http://www.homedepot.com/p/EcoSmart-65W-Equivalent-Soft-White-5-6in-E26-Dimmable-Downlight-LED-Light-Bulb-3-Pack-DL-N14A10FR1-27/206668079?keyword=693690567382

These say $29.97 on the website, but rang up at my local store at $14.97 as shown on their tag. If you want a picture of the receipt, PM me and I will email/text it to you.

 

[zeekh]

Rule of thumb is 1 size up is fine, expecially on the smaller blades.

Sent from my SM-G920V using Tapatalk

I'm curious, can you go down a size? like putting a 14" on a 16" saw.

 

[kneeman]

If you like the Milwaukee pliers and stuff for personal use get the older models. All the new replacement are made much worse.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[Bobcat753]

You will be fine running that 16" bar on the 330T. They were available with a 16" from echo. The only thing you might do is adjust the carb so it runs slightly richer.

 

[ShakinLM7]

How they ended up taking care of me...

Lucky Dog!

Sorry should have clarified. This wasn't a full chainsaw...its just a bar/chain.

Do you guys think it would be safe to mount that on a 14 inch echo? I got a display model 330T last fall (for free) that was missing the chain. Not sure if it would be a good idea to put a 16 inch on it since it was designed for a 14 inch.

Done it once a bunch of times and I've never been bit by a saw, As long as you know how to safely run a saw you'll be alright. If you dont know how it doesnt matter what size bar you have, it can hurt you!

These are 2 1800 Watt Generators and one larger one sitting behind them. looks like there is a January 2016 date on them.

I'd stay away from the inverter unless you plan to flip it. I've seen dozens of those things refurbished sitting on the shelf.

You will be fine running that 16" bar on the 330T. They were available with a 16" from echo. The only thing you might do is adjust the carb so it runs slightly richer.

Love you profile pic!

 

[12three]

those ryobi inverter generators are on clearance for $100 off in some locations near me and full price at others. there are a few different ones though. i am personally not sure of the differences bc i was only following the green ones that my store had for $100off and it has been a very slow drop for those, so i frequently dont even bother punching in ryobi into the pca.

if im not mistaken theres one model that is the same or very similar except it is gray instead of green. i believe that one may be on a better sale if you can find it. personally i wouldnt bother looking for it bc i have never seen it in person.

as to the problems with them, i dunno i never had one but i would roll the dice on one if i got a deal. i have watched a youtube video showing problems with the 110v outlet coming loose, but it appeared to be an easy fix. there are other general reports about 'ive seen a bunch of no box refurbs' i dunno.. ppl return open box and just say i dont want it, and imo, most ppl who know how to maintain a little gas motor arent going to mess with a ryobi. so i would guess some 'problems' are operator error. i would take a shot at one for the right price, but until that day comes i aint worried about it. if nothing else the hondas/yamahas can be had on craigslist and at a pawn shop for an ok deal too

 

[gumme]

I've been sitting on a Ridgid 5700 watt generator for a week and a half. Haven't gotten any bites, except the typical craigslists lowballs. Before I return it to the store, Anybody in the Chicagoland area that wants it, let me know. 299.00 plus tax.

 

[ShakinLM7]

I've been sitting on a Ridgid 5700 watt generator for a week and a half. Haven't gotten any bites, except the typical craigslists lowballs. Before I return it to the store, Anybody in the Chicagoland area that wants it, let me know. 299.00 plus tax.

If you still have it come Fathers Day I'll buy it.

 

[JesseJDE]

Yeah, the gave me 2 Dewalt 7000 Watts to replace the 5700 and 6800 watt Ridgid generators they sold from my will call. There is 1 6800 watt Ridgid behind the Dewalts..

Question is, should I keep my 6800 Ridgid I got at home or upgrade to a Dewalt for myself and flip the Ridgid?

What is the size of the box the 6800 comes in?

Trying to see if one will fit in my car. I remember seeing one in my travels last week.

 

[JesseJDE]

What prices are you guys been able to sell your generators at?

 

[aelb771]

Rule of thumb is 1 size up is fine, expecially on the smaller blades.

Sent from my SM-G920V using Tapatalk

You will be fine running that 16" bar on the 330T. They were available with a 16" from echo. The only thing you might do is adjust the carb so it runs slightly richer.

Done it once a bunch of times and I've never been bit by a saw, As long as you know how to safely run a saw you'll be alright. If you dont know how it doesnt matter what size bar you have, it can hurt you!

Thanks for the info guys

 

[brickie]

What is the size of the box the 6800 comes in?

Trying to see if one will fit in my car. I remember seeing one in my travels last week.

35x24x23. About 260+ lbs I think..Really don't think this is going to fit in MOST cars,unless maybe a station wagon type deal.

I probably averaged about $200 per on the ones I sold. But I have yet to pay full clearance price on ANY generator I bought. Usually buy multiples when I snag em, so usually pay $225-250 for the 5700, and $299-350 for the 6800. And well of course you know the Dewalts were a crazy good deal due to a f-up on their part.Usually mine are gone in 1-2 days at most.

The Dewalts, I'm asking for a little more just because of name.

 

[crzipilot]

3600 gen. Just went for 350. I think? 400 maybe. Can't rememebe

 

[JesseJDE]

35x24x23. About 260+ lbs I think..Really don't think this is going to fit in MOST cars,unless maybe a station wagon type deal.

I probably averaged about $200 per on the ones I sold. But I have yet to pay full clearance price on ANY generator I bought. Usually buy multiples when I snag em, so usually pay $225-250 for the 5700, and $299-350 for the 6800. And well of course you know the Dewalts were a crazy good deal due to a f-up on their part.Usually mine are gone in 1-2 days at most.

The Dewalts, I'm asking for a little more just because of name.

Thanks. I figured it wouldn't fit.

I think I'll pay for it this week if it's still there. Put it on will call and come back with a bigger vehicle. If they sell it like they did yours I will just ask for a dewalt lol

 

[drwheels]

Found A Nearly New Paslode framing nailer in tool rental. Talk to the manager about purchasing it since it is now the old model. Was turned down and told tool rental is a separate Department. Bummer.

Sent from my SM-G900P using Tapatalk

They sell that stuff but it is not cheap.Was at a store that showed inventory of three items. Not found anywhere.The tool manager asked how I found it and I just pointed to my head.He had received 6 paslodes without cardboard off of the truck.

 

[drwheels]

Has anyone had any luck with purchasing clearance or pennied items out of the tool rental department?

Yes It has been a while.

 

[Spn1025]

Hmmm.

Sent from my iPhone using Tapatalk

 

[Spn1025]

Wonder what this is

Sent from my iPhone using Tapatalk

 

[Chaplian]

So question: How do you guys get them to bring you stuff down from the top shelves that's locked up behind the metal wire gates?

 

[12three]

So question: How do you guys get them to bring you stuff down from the top shelves that's locked up behind the metal wire gates?

ask and pray, chaplain

 

[Chaplian]

ask and pray, chaplain

Ha, I see what you did there, and thanks. Guess it's gonna take a lot of praying.

 

[Spn1025]

Going back for the turkey fryers



Sent from my iPhone using Tapatalk

 

[REXAMUS]

Going back for the turkey fryers



Sent from my iPhone using Tapatalk

Penny?

Sent from my SM-G920V using Tapatalk

 

[Spn1025]

Yup

 

[Spn1025]

Here we go.

Sent from my iPhone using Tapatalk

 

[mswol767]

Here we go.

Sent from my iPhone using Tapatalk

Penny?

 

[Spn1025]

Got em and gave away 3 in the parking lot. Could only fit 3 in my car


Sent from my iPhone using Tapatalk