Home Depot Clearance Thread 2016

[kneeman]

Does anyone know if it would be okay to transport the 52" Husky Toolchest on it's side while still packaged in the box?

No problem on side.

What is a problem is a C302H compressor. At store I saw this week on the top shelve. I got the tool dept head over and pointed up and asked you see that? He said yea, what, do you want that model? To play along I said sure. I wait for them to get the picker for ten minutes the guy goes to swing it on the platform and the bottom side of the box falls apart and he starts complaining. Mgr said what is wrong? He said it is leaking. He looks at me and says I guess you don't want that one. I said nope.

The whole time neither one of them realized the box had been laying on its side up on the top shelve for who knows how long. I mean oil was dripping down onto the compressor display below.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[REXAMUS]

Sent from my SM-G920V using Tapatalk

 

[01Snake]

Yea no problem. Hurry up and ship it to me already.

Saw the toolbox yesterday and went back today to grab the last Dewalt miter saw. If it was still there, I was gonna grab it but looks like someone bought it. It was on the floor in the RT so I'm not really surprised. Did get the miter saw and used a Lowe's 10% coupon.

What is a problem is a C302H compressor. At store I saw this week on the top shelve. I got the tool dept head over and pointed up and asked you see that? He said yea, what, do you want that model? To play along I said sure. I wait for them to get the picker for ten minutes the guy goes to swing it on the platform and the bottom side of the box falls apart and he starts complaining. Mgr said what is wrong? He said it is leaking. He looks at me and says I guess you don't want that one. I said nope.

The whole time neither one of them realized the box had been laying on its side up on the top shelve for who knows how long. I mean oil was dripping down onto the compressor display below.

I found this out as well. First one I bought (C301H) was still in the box when I got it. Transported it on its side about 25 miles home and of course when I got it out, oil had leaked out all over the box and unit. Not a huge amount but enough.

The second one I got (C302H) was on the floor with no box. Made sure I tightened the oil plug before transporting it on its side and it was fine. No leaks.

 

[brickie]

No problem on side.

What is a problem is a C302H compressor. At store I saw this week on the top shelve. I got the tool dept head over and pointed up and asked you see that? He said yea, what, do you want that model? To play along I said sure. I wait for them to get the picker for ten minutes the guy goes to swing it on the platform and the bottom side of the box falls apart and he starts complaining. Mgr said what is wrong? He said it is leaking. He looks at me and says I guess you don't want that one. I said nope.

The whole time neither one of them realized the box had been laying on its side up on the top shelve for who knows how long. I mean oil was dripping down onto the compressor display below.

Sent from my SAMSUNG-SM-G935A using Tapatalk

that's when you offer to buy it for $25!

 

[Jarreds]

Sent from my SM-G920V using Tapatalk

 

[Blue 04 Z71]

I could use that Milwaukee blower and the ridgid shop vac!

 

[12three]

Sent from my SM-G920V using Tapatalk

hey bud, pictures of the shelf stickers dont really tell anyone much of anything bc the stickers on most items worth hunting are wrong...
the pics you posted would be helpful with a description confirming whether or not the tags are correct. ie. ppl post penny deals all the time with yellow stickers that have .02/.03/.06/.00 prices...
as it stands the pics you posted are only helpful to the ppl who need or are following those products. based on the limited amount of chatter about those specifc products on here so far, the pics alone arent exceptonally useful without a description

 

[MorSpeed]

Some Dewalt, Stanley and Estwing hand tools hitting clearance. All at .06 level on an endcap.

 

[MorSpeed]

Some Dewalt, Stanley and Estwing hand tools hitting clearance. All at .06 level on an endcap. My apologize for the terrible useless picture. First time attaching something here from my phone.

 

[jakedi99]

some dewalt, stanley and estwing hand tools hitting clearance. All at .06 level on an endcap. My apologize for the terrible useless picture. First time attaching something here from my phone.

we need more description!!!!

 

[kneeman]

hey bud, pictures of the shelf stickers dont really tell anyone much of anything bc the stickers on most items worth hunting are wrong...
the pics you posted would be helpful with a description confirming whether or not the tags are correct. ie. ppl post penny deals all the time with yellow stickers that have .02/.03/.06/.00 prices...
as it stands the pics you posted are only helpful to the ppl who need or are following those products. based on the limited amount of chatter about those specifc products on here so far, the pics alone arent exceptonally useful without a description

I disagree with everything you just said.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[Jarreds]

hey bud, pictures of the shelf stickers dont really tell anyone much of anything bc the stickers on most items worth hunting are wrong...
the pics you posted would be helpful with a description confirming whether or not the tags are correct. ie. ppl post penny deals all the time with yellow stickers that have .02/.03/.06/.00 prices...
as it stands the pics you posted are only helpful to the ppl who need or are following those products. based on the limited amount of chatter about those specifc products on here so far, the pics alone arent exceptonally useful without a description

Yes all the prices were as is posted.
As far as descriptions, you can read the brand what it is and item number on almost every picture I posted.

Sent from my SM-G920V using Tapatalk

 

[MorSpeed]

The attached picture had the item, sku and price pictured. Not sure what else would be required. Unfortunately too small to be of use as I said in the follow up post. I'll strive to do better in future posts.

 

[jakedi99]

I need length, girth, weight and PCA pics


Sent from my iPhone using Tapatalk

 

[dntexpectmercy86]

For those of you who purchased the electric homelite leaf blowers, how much were you able to resell them for? I have a **** ton around me.

 

[kneeman]

Those blowers are give aways

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[chrisexv6]

I need length, girth, weight and PCA pics


Sent from my iPhone using Tapatalk

Are we still talking about clearance items?

Sent from my Nexus 6P using Tapatalk

 

[AdamRos19]

Lol I posted about that Stanley fatmax Fubar about 2 weeks ago it's still an .06 it's about a month past that clearance date so I would hope it drops again sometime soon to .03 along with the he 3 pack husky ova hoses. They are at 5.03 now

 

[REXAMUS]

For those of you who purchased the electric homelite leaf blowers, how much were you able to resell them for? I have a **** ton around me.

I listed all of mine for $25 and accepted $20. My goal was to get rid of them all ASAP and sold 5 in two days.

 

[Jarreds]

Does anyone know what the last clearance price on the Ridgid 6800 watt generator was?
The system is showing $399 and 0 in stock. I found it repaired one in the garden center

Sent from my SM-G920V using Tapatalk

 

[Spn1025]

Anybody have any problems shipping an Ego trimmer? The one I sent says it's being held at the nearby FedEx ship center "available for pickup". Not sure what's going on, and I guess I won't know til tomorrow. Confirmed that the dimensions are fine for FedEx Ground shipping. I didn't put a lithium ion battery sign on it..but is that required for ground shipping?

I'm guessing either it just didn't make the truck, or worst case they ruined it?

 

[Jarreds]

Water heater jackets
Price was current

Sent from my SM-G920V using Tapatalk

 

[DanielSimpsonDay]

Mayhew 3 pc pry bar set has dropped again, was $37.00 on 3/7 when I took the last pic

Sent from my VS986 using Tapatalk

I think this just went to .03 at my store, I "think" it's $28.03 now. They pulled it from the normal spot and put it on the clearance section. I was in a bit of a rush and glanced at them quickly when I walked by.

Would there be another price drop? How soon until possible penny status?

 

[Tim_P]

Thanks I need one of those jackets, my last one got ruined with a water heater leak.

 

[dntexpectmercy86]

I listed all of mine for $25 and accepted $20. My goal was to get rid of them all ASAP and sold 5 in two days.

Ok perfect! I know I can't flip them for much. I was thinking $20-$25 max. All the stores around me have quite a few showing in stock. This IF I can find them.

 

[REXAMUS]

Ok perfect! I know I can't flip them for much. I was thinking $20-$25 max. All the stores around me have quite a few showing in stock. This IF I can find them.

All the ones I found were in plain sight so hopefully yours are.

Sent from my SM-G920V using Tapatalk

 

[wastedcosmonaut]

hey bud, pictures of the shelf stickers dont really tell anyone much of anything bc the stickers on most items worth hunting are wrong...
the pics you posted would be helpful with a description confirming whether or not the tags are correct. ie. ppl post penny deals all the time with yellow stickers that have .02/.03/.06/.00 prices...
as it stands the pics you posted are only helpful to the ppl who need or are following those products. based on the limited amount of chatter about those specifc products on here so far, the pics alone arent exceptonally useful without a description

SKUs of common power tools at half off, as a heads up to START tracking them locally? Completely useful.

 

[cdmd2b]

Anybody have any problems shipping an Ego trimmer? The one I sent says it's being held at the nearby FedEx ship center "available for pickup". Not sure what's going on, and I guess I won't know til tomorrow. Confirmed that the dimensions are fine for FedEx Ground shipping. I didn't put a lithium ion battery sign on it..but is that required for ground shipping?

I'm guessing either it just didn't make the truck, or worst case they ruined it?

R u requiring signature? If so, I call FedEx and tell them to hold it for me and get it on lunch break the next day. Otherwise it just gets delivered and no one home to sign for it.

Sent from my SM-N920V using Tapatalk

 

[cdmd2b]

Ok perfect! I know I can't flip them for much. I was thinking $20-$25 max. All the stores around me have quite a few showing in stock. This IF I can find them.

Not leaf season so u might sit on them for 8 months..

Sent from my SM-N920V using Tapatalk

 

[chrisexv6]

hey bud, pictures of the shelf stickers dont really tell anyone much of anything bc the stickers on most items worth hunting are wrong...
the pics you posted would be helpful with a description confirming whether or not the tags are correct. ie. ppl post penny deals all the time with yellow stickers that have .02/.03/.06/.00 prices...
as it stands the pics you posted are only helpful to the ppl who need or are following those products. based on the limited amount of chatter about those specifc products on here so far, the pics alone arent exceptonally useful without a description

You can click the pic, zoom in and note the SKU.

That's the point... A SKU to keep track of as the price drops.

Sent from my Nexus 6P using Tapatalk

 

[Jarreds]

Guys,
I know his rant was towards me but I did think of a bigger picture. The search feature on this forum blows. If we don't include a description on the pictures you will never be able to search for it. I know that is not what he was implying but a description and sku would help.

Sent from my SM-G920V using Tapatalk

 

[Spn1025]

R u requiring signature? If so, I call FedEx and tell them to hold it for me and get it on lunch break the next day. Otherwise it just gets delivered and no one home to sign for it.

Sent from my SM-N920V using Tapatalk

It's supposed to be going to MO. It's being held at the location near me (Maine).

 

[cdmd2b]

It's supposed to be going to MO. It's being held at the location near me (Maine).

Opps my bad. Lol

Sent from my SM-N920V using Tapatalk

 

[BaMaDuDe87]

Guys,
I know his rant was towards me but I did think of a bigger picture. The search feature on this forum blows. If we don't include a description on the pictures you will never be able to search for it. I know that is not what he was implying but a description and sku would help.

Sent from my SM-G920V using Tapatalk

What area are you in?

 

[Jarreds]

I'm from the New Orleans/ Baton Rouge area. With work though I'm always all over the country.

Sent from my SM-G920V using Tapatalk

 

[LoveOldIron]

Lol I posted about that Stanley fatmax Fubar about 2 weeks ago it's still an .06 it's about a month past that clearance date so I would hope it drops again sometime soon to .03 along with the he 3 pack husky ova hoses. They are at 5.03 now

Around here, I swear they cut open the air hose 3-packs so they can sell the individuals at full price. One HD was supposed to have 6 3-packs. I found 1, right beside about 15 singles.

 

[Spn1025]

Around here, I swear they cut open the air hose 3-packs so they can sell the individuals at full price. One HD was supposed to have 6 3-packs. I found 1, right beside about 15 singles.

Ha I noticed the same here. couldn't find any of the 3 packs at one store that supposedly had a bunch but had plenty of singles. Found a 3 pack at the next store. Only wanted 1 3-pack

 

[REXAMUS]

Ha I noticed the same here. couldn't find any of the 3 packs at one store that supposedly had a bunch but had plenty of singles. Found a 3 pack at the next store. Only wanted 1 3-pack

I was able to find 5 3-packs at one store...I just included them with the compressors I sold and kept one for myself.

 

[Spn1025]

I like posting unsearchable pics.



Sent from my iPhone using Tapatalk

 

[Lurch67]

I purchased the 20 Gallon husky compressor with tools for around $40.03. Now the store has them marked at $129. Don't they normally go down in price?